Author Topic: Don't ask me how I know but.....  (Read 3293 times)

Offline jeryst

  • Resident
  • *****
  • Posts: 2032
Re: Don't ask me how I know but.....
« Reply #30 on: October 14, 2007 - 09:21:42 AM »
Don't ask me how I know, but ...

Don't try to jump start your car at the starter solenoid with the car in gear! (and of course the neutral safety switch by-passed)  :faint:

:iagree:

I use to work in a carwash the summer after I graduated high school. The owner allowed us to work on our cars in non-working bays when business was slow. I did this, and the car went throught he carwash door. Those things are pretty expensive!




Offline ksierens

  • Sr. Member
  • ****
  • Posts: 1408
    • 70 Challenger Resurrection
Re: Don't ask me how I know but.....
« Reply #31 on: October 14, 2007 - 09:27:57 AM »
I use to work in a carwash the summer after I graduated high school. The owner allowed us to work on our cars in non-working bays when business was slow. I did this, and the car went throught he carwash door. Those things are pretty expensive!

Luckily I was having some wiring problems with a 70 Cuda I had and had to jumper the coil so I could just reach up and yank the wire off.  Damn near run myself over, with my own car. Hmm, how would they put that on a tomb stone?
1970 Triple Black Challenger R/T  440 Six Pack - 4 Speed - 3.55 Dana
Kurt - SE Michigan

Offline farmboy70

  • Sr. Member
  • ****
  • Posts: 1636
Re: Don't ask me how I know but.....
« Reply #32 on: October 14, 2007 - 09:28:29 AM »
:iagree:

I use to work in a carwash the summer after I graduated high school. The owner allowed us to work on our cars in non-working bays when business was slow. I did this, and the car went throught he carwash door. Those things are pretty expensive!
One of my first jobs was as a state inspection mechanic, my first month there I did a brake job and was moving the car to the front of the shop after I had finished sooo
 Don't ask me how I know when your bring the car a round to give to the customer waiting for their car after doing a brake job pump the brakes or you will run into the front of the building where their standing. Not a way to impress your new boss or customer.
Ran right in to the walk-in door!
Dave

Offline IMNCARN82

  • Resident
  • *****
  • Posts: 3547
  • LeDZeP
Re: Don't ask me how I know but.....
« Reply #33 on: October 14, 2007 - 09:59:35 AM »
I jumped a car once,I could hear the tranny suck into gear,Luckily it was reverse. Backed up right into a tree. Could have been way worse!!!   Sounds like I'm not the only one :drunk:
'73 340 5 speed,RMS,BAER,... "Supercuda" (O[   ]||||[   ]O)  
'69 Dodge Charger 383,Auto                  (OiiiiiiiiiiIiiiiiiiiiiO)
13' Challenger R/T BlacktoP  6spd. (OO________OO)
71' Demon
75' Duster
87' Conquest TSI
56' Plaza
Boulder CO
Robert    "cuda bob"

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: Don't ask me how I know but.....
« Reply #34 on: October 14, 2007 - 11:32:37 AM »
When starting up another car parked in front of your Mopar, Don't assume that it is an auto tranny in park and someone DIDN'T bypass the clutch pedal safety switch.


When cleaning your garage floor with a little bit of GASOLINE, make sure that yo don't have a water heater close by with a standing pilot light.


Rob
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline LAA66

  • Sr. Member
  • ****
  • Posts: 1669
Re: Don't ask me how I know but.....
« Reply #35 on: October 14, 2007 - 12:07:28 PM »
When starting up another car parked in front of your Mopar, Don't assume that it is an auto tranny in park and someone DIDN'T bypass the clutch pedal safety switch.


When cleaning your garage floor with a little bit of GASOLINE, make sure that yo don't have a water heater close by with a standing pilot light.


Rob

 Good points there Rob!
My greatest fear, flammable materials and a water heater in the same room. Planning to relocate the heater outside.

 Used to have my clutch switch by-passed also. Not any more. I don't think the switch protects if you happen to jump the relay or down at the starter though?

Offline RDF

  • Sr. Member
  • ****
  • Posts: 1840
  • The pain that greets me is the stick that beats me
Re: Don't ask me how I know but.....
« Reply #36 on: October 14, 2007 - 12:12:29 PM »
Don't ask me how I know, but ...

Don't hook up a charger to your battery, in the dark.....backwards......small fires tend to happen.... :misbehaving:
Bob

1973 'Cuda

If we never drown we'll never know how well it tastes....So tell me how it tastes and I'll know just how well you drowned.

My build:
http://www.cuda-challenger.com/cc/index.php?topic=45749.0