Author Topic: 440 stuff  (Read 1123 times)

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
440 stuff
« on: November 27, 2007 - 01:05:21 AM »
I got some engine parts someone may need for a bare block

Couple of 68 69 70 water pump housings
2 or 3 timing chain covers
maybe 1972 or 1973 valve covers
Some 68 valve covers
c body oil pan  b body oil pan   not 402's or baffled
Factory push rods
some ac pullies
cam bolt and washers
distributor drives
Some new correct pcv valves
a new ac fan blower tube
 Some e body door hinges in good shape one or two of each
A chrome challenger gas cap
found 2 more steering shafts and the couplers for the steering box one manual and one power
2 crush cans
A 2 spoke wheel with some pits
an nos heater cable for a 70
new ignition switch (electrical not key)
Rallye stripe kit  mat black
-------------------------------------------------Headlight switch-----Sold to Mrob
white 72/74 visors
formula s valve covers
Some winshield corners
74  bucket seats with tracks
74 seat hinge covers in black
The safety interlock switch out of the seat
Some old door handles off a 72 cuda with the lock stuff removed
Black glove box door that needs cleaning and paint
Some black kicker panels
74 challenger and cuda bumper guards-rear
72 cuda standard disc brake master cylinder with the brake lines
Some emergency brake small pieces like the center pull and some levers
mechanical kickdown linkage stuff

This is for members only so dont e mail me, just pm or post,  just trying to help some of you out.  None of this stuff is high dollar

« Last Edit: November 27, 2007 - 09:03:09 AM by Moparal »




Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9102
  • Tastes Like Chicken
Re: 440 stuff
« Reply #1 on: November 27, 2007 - 08:45:38 AM »
  Interested in
  black kick panels
drivers side windshield corner
the old door handles

thanks alot AL!!!
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: 440 stuff
« Reply #2 on: November 27, 2007 - 09:31:40 AM »
Josh, I will hold them for you. Also, did you need a special trans cross member?  I may have one. I am checking on the bolt hole measurements from a member to see if it is right.

Offline 733404

  • Jr. Member
  • **
  • Posts: 91
  • old pic from about 1978, N. Texas
Re: 440 stuff
« Reply #3 on: November 27, 2007 - 11:23:06 AM »
i'll bite on that chrome gas cap, how much and how does it look

Thx
shawn

Quote: children seldom misquote you, instead they repeat word for word what you shouldn't have said!

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: 440 stuff
« Reply #4 on: November 27, 2007 - 03:01:16 PM »
i'll bite on that chrome gas cap, how much and how does it look

Thx

10 bucks 6.90 for priority shipping and it looks good

Offline 733404

  • Jr. Member
  • **
  • Posts: 91
  • old pic from about 1978, N. Texas
Re: 440 stuff
« Reply #5 on: November 27, 2007 - 04:39:59 PM »
sounds good, i'll IM ya
shawn

Quote: children seldom misquote you, instead they repeat word for word what you shouldn't have said!

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9102
  • Tastes Like Chicken
Re: 440 stuff
« Reply #6 on: November 27, 2007 - 07:51:54 PM »
  I have actually purchased a cross member.  Let me know the measurements you have as mine is not installed quite yet.  Maybe I need the one you speak of.
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: 440 stuff
« Reply #7 on: November 27, 2007 - 08:07:26 PM »
10 bucks 6.90 for priority shipping and it looks good

Since I am going to the airport tomorrow and your sending a payment in the mail, I will send this out to you tomorrow, but please be sure to pm me your exact address and name. It is close to the holidays and I dont want any mixups. I will use priority mail on this chrome cap...ALAN


And Josh, if this is the correct trans crossmember you need, it will be for you, I wont sell it to anyone else. I will measure it when I can find time. It was for a 70 only bb hp e body with 4 speed. Mine was a sm blk 4 speed so mine took the regular type