Which wheels on a 70 Challenger

Author Topic: Which wheels on a 70 Challenger  (Read 7199 times)

Offline Born_Fast

  • Jr. Member
  • **
  • Posts: 246
  • RIGHT PEDAL :: LEFT LANE
Which wheels on a 70 Challenger
« on: December 21, 2007 - 04:35:04 AM »
What do you guys think about these wheels for a 70' Challenger? 15" 275 rear and 235 front.

Originally i wanted to go for Torq Thrusts, but like G-Man said - they are way overused and can be found on anything from vintage hotrods to huge limousines from the 50s and 60s.

So i'm looking for something that says MUSCLECAR even more and i found these round hole designs to match the Challenger pretty well. Not quite sure which one though.

the Eagle Alcoa



Eagle 057



Eagle 186



or the American Racing Baja



Can anyone tell me what offset i have to consider for front/rear?




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Which wheels on a 70 Challenger
« Reply #1 on: December 21, 2007 - 04:40:06 AM »
generally the offset is centered , 15X7 is 3.5" , 15X8 or 8.5 is 4"
 I have always liked the look of the Centerline Champ 500 wheel , similar to the pix you have

Challenger - You`ll wish You Hadn`t

Offline cowboy

  • Sr. Member
  • ****
  • Posts: 1615
  • Denmark
    • CowboyCars.dk
Re: Which wheels on a 70 Challenger
« Reply #2 on: December 21, 2007 - 05:33:03 AM »
-
I got 17" - 8" in the back, with 245/45 and 4" backspace, - vere-VERY close fit on outer fender, lots of space inside....
I think you should go for 4½" BS....

« Last Edit: December 21, 2007 - 05:34:36 AM by cowboy »
MoPar's for Cruizin, Racing & Pro-touring: www.CowboyCars.dk

1930 Plymouth Hot Rod wannabe - 1957 DeSoto Fireflite Sportsman - 1967 RaceCuda  -  1968 Barracuda  -  1971 Challenger R/T Conv.


Offline wally426ci

  • Sr. Resident
  • ******
  • Posts: 5095
    • maryland mopars
Re: Which wheels on a 70 Challenger
« Reply #3 on: December 21, 2007 - 05:42:35 AM »
Love the look of American Racing rims  :2thumbs:
{OOI====I====IOO}
      '71 Challenger
      [O[]=====[]O]
      '68 D100

Offline MJS73

  • Sr. Member
  • ****
  • Posts: 1522
    • Mike's 1973 Challenger
Re: Which wheels on a 70 Challenger
« Reply #4 on: December 21, 2007 - 06:08:10 AM »
Those round hole wheels look like truck rims to me...gotta love the 15" Magnums.

Mike
www.mikes73.com
Don't PM me - send me an e-mail at mjsavage2001@yahoo.com


Offline Born_Fast

  • Jr. Member
  • **
  • Posts: 246
  • RIGHT PEDAL :: LEFT LANE
Re: Which wheels on a 70 Challenger
« Reply #5 on: December 21, 2007 - 06:26:41 AM »
Those round hole wheels look like truck rims to me...gotta love the 15" Magnums.

Mike


Somewhat true - i gotta give you that. Still people are driving them on many classic musclecars and if they match the car - they look badass in my opinion.

Here's another one: Cragar 320



Here they are on a Trans Am:

« Last Edit: December 21, 2007 - 06:30:59 AM by Dreamcruiser »

Offline Born_Fast

  • Jr. Member
  • **
  • Posts: 246
  • RIGHT PEDAL :: LEFT LANE
Re: Which wheels on a 70 Challenger
« Reply #6 on: December 21, 2007 - 06:48:11 AM »
I'm also digging the look of the Centerline Auto Drag rims.

These are the same as on Wesley Snipes' Charger from the movie Blade.







Otoh, i wonder how these fully closed wheels affect disc brake cooling. I wouldn't want my brakes to overheat and stop functioning while travelling at high speeds.

Offline miketyler

  • Resident
  • *****
  • Posts: 2561
    • www.miketyler.net
Re: Which wheels on a 70 Challenger
« Reply #7 on: December 21, 2007 - 07:27:25 AM »
I like The Eagle Alocoa - maybe because the pictured model has the zero offset and the "deep dish" look


72' Cuda restomod
70 Mustang Mach 1
07' Toyota Tacoma Prerunner Dbl cab in Speedway Blue!
01' Honda 1100 Shadow Sabre
96' Seadoo Challenger

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Which wheels on a 70 Challenger
« Reply #8 on: December 21, 2007 - 09:36:55 AM »
If you like the Centerline look and with holes, this is a cool wheel.  This is a pic of one of our member cars.  I think they are Cragars????  Not too sure. 

Jeeps actually had a wheel similar on the Wranglers.  May be the same bolt pattern if I'm not mistaken so you might even pick them up in a salvage yard or craigslist.org for cheap.

http://www.cardomain.com/ride/2133982/4
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline MJS73

  • Sr. Member
  • ****
  • Posts: 1522
    • Mike's 1973 Challenger
Re: Which wheels on a 70 Challenger
« Reply #9 on: December 21, 2007 - 10:28:02 AM »
Somewhat true - i gotta give you that. Still people are driving them on many classic musclecars and if they match the car - they look badass in my opinion.

Here's another one: Cragar 320



Here they are on a Trans Am:




Didn't Dodge put those (or something very similar) on a van or pickup?

Mike
www.mikes73.com
Don't PM me - send me an e-mail at mjsavage2001@yahoo.com


Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Which wheels on a 70 Challenger
« Reply #10 on: December 21, 2007 - 11:13:44 AM »
Didn't Dodge put those (or something very similar) on a van or pickup?

Mike


 :clueless: Not sure about Dodge but Ford had these on old Rangers/Bronco IIs...  :dunno:

1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline Travis72

  • Full Member
  • ***
  • Posts: 894
Re: Which wheels on a 70 Challenger
« Reply #11 on: December 21, 2007 - 05:06:46 PM »
I had the Cragar 320's in black on my Cuda for a long time.  I thought they looked pretty good and they are cheap.  I couldn't find that many great pictures, but here's some.

Also, I think that Trans Am has Weld Draglites on it... not the Cragar rims.

http://www.weldracing.com/wheels/details.asp?wheelid=34&name=Draglite&style=90&desc=1-Piece%20Forged%20Alloy%20Polished

Travis
72 Cuda

Offline 1BADFISH™

  • Resident
  • *****
  • Posts: 2805
Re: Which wheels on a 70 Challenger
« Reply #12 on: December 21, 2007 - 05:15:00 PM »
Those round hole wheels look like truck rims to me...gotta love the 15" Magnums.

Mike

Definately look a lot like the truck wheels I was considering for my truck. Hard to tell till I see them on a car I guess. I still like the torq thrust or coys for a muscle car.   :2thumbs:

Dave
Charlottetown, PE
2014 GMC Sierra Crew Cab White Diamond edition.
1970 Dodge Challenger 340-6 4spd.
*Member Since* Oct 11, 2005

Offline 71bigblock

  • Sr. Resident
  • ******
  • Posts: 5337
    • Steve's Mopars
Re: Which wheels on a 70 Challenger
« Reply #13 on: December 21, 2007 - 05:57:36 PM »
Definately look a lot like the truck wheels I was considering for my truck. Hard to tell till I see them on a car I guess. I still like the torq thrust or coys for a muscle car.   :2thumbs:

x3, look like truck rims.  I like the magnums too, but I think that rallies say more business.  Maybe the all chrome rallies?  Those look good on some cars...   :dunno:

Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5392
Re: Which wheels on a 70 Challenger
« Reply #14 on: December 21, 2007 - 06:36:39 PM »
I'd say something dark in color rather than chrome. And also im a huge fan of plain steelies with chrome lugs, thats mopar there.

i used to run stock car d windows on my cuda


ive run steelies


and rear draglites with 29 1/2s that looked nasty, wish i had front runners

Build Page: Goody's 'Cuda Build Page
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum

Wheel & Tire Specs:Link