TRYING TO MAKE SOME PROGRESS!

[CHUCKS71]

What style or company are you using? 

Topcat said U.S. Cartool has the best connectors.

[CHUCKS71]

I have not much on my Challenger in the last few weeks still saving money so I can get the rear frame rails and frame conectors.I'll get them after the Nat's if I don't spend all of my money there!I did pick up some clutch pedals at the Mopar Happening in Belvidere today.

[Moparal]

Those are 72 and up. Good score. And with the safety clutch switch.

[CHUCKS71]

I got them for $125.00  Hey Al how can you tell the difference in the years?

[Moparal]

The pedals are rectangle for 72 and up just like your picture. The 70 71 will be smaller pedal pads and not rectangled

[Topcat]

Topcat said U.S. Cartool has the best connectors.

Here's the differences and why...

http://www.xvmotorsports.com/products/detail/index.cfm?nPID=177&cid=105&cdesc=Chassis%20Stiffening

http://www.uscartool.com/Eframeconn/index.html

Notice the tail edge on the US Car Tool. I believe they're the originators of this besides.

[CHUCKS71]

They are on the way! 

[Topcat]

You won't be doing the  very long once you start putting them in. PITA.

When you're finally done then you'll 

[CHUCKS71]

  I know I see how everyone else suffered installing them!

[CHUCKS71]

You won't be doing the  very long once you start putting them in. PITA.

When you're finally done then you'll 

I hate when Topcat is right!!!   

[hemiken]

Wow....................... That really sucks that they do not fit a little better than that

[CHUCKS71]

Wow....................... That really sucks that they do not fit a little better than that

The ad say's "Our frame connectors are CAD designed to be a 100% perfect fit to your floopan. They are laser cut from 11 gauge steel (almost 1/8" thick) and then CNC bent to create that perfect fit that US Car Tool products are known for."

I do have Goodmark floors so that might be some of the problem.It looks like it has a few spots I will have to reshape to get a good fit.All in all just more work like Topcat said.

[hemiken]

At least you are still making progress old mate and it is looking more solid with everything you do..............

[Topcat]

I hate when Topcat is right!!!   

  

I can't help laughing. Oh the pain these are.

Weld on cut off bolt heads on each end almost the size of the holes.
You'll find out that the trial on and off fitting will be more accurate and less eyeballing making sure they're supposed to be where they're to get welded. Then just cut off the protruding stud and weld it shut.

[e-tek]

Weld on cut off bolt heads on each end almost the size of the holes.
You'll find out that the trial on and off fitting will be more accurate and less eyeballing making sure they're supposed to be where they're to get welded. Then just cut off the protruding stud and weld it shut.

OK - that is brilliant.