wiper switch problems

['Cuda Hunter]

  I have a 73 wiper motor on the right.  It has the same plug in the car as in the picture.  
  What plug do I need to make the wiper switch on the left work, the left is a 70 barracuda.
  My wiring harness for the 70 hasn't a plug here so I must rewire one in place.  
  thanks

[Challenger6pak]

Why don't you just change your wiper switch over to the unit you want to use?

[Chryco Psycho]

swap the switch , the plug will line up

[Moparal]

3 speed switch on the left. 2 speed on the right I do believe. And the 2 speed should have a foot pump washer. The left may be a variable speed.  I guess you say they cut the wires on your 70 cuda right?  What wiper motor did it used to have to begin with?

[4Cruizn]

How many prongs out of the back of each of those??  I think 2 speed has 6 and 3 speed has 7.   

['Cuda Hunter]

  I can't swap switch's because the 73 goes in my 73. I just removed it as I was trying to figure out differences.  The 73 is now back in it's home.  The 70 doesn't have a wiper motor yet.  I just had the switch so I am trying to build upon that. 
  Moparal, Why do you say that the two speed has the foor pump washer?  I havn't played with one of those yet.
  The wiring harness in my 70 is not originally from that car.  I had nothing to start with. 

[Chryco Psycho]

the 2 spd switch will not work with a 3 speed wiper or the other way around , if you need to use a 3 speed wiper on the 70 you need a different switch to control it

[ebodycrazy4ever]

I have the correct plug you need & you e-mailed me about it. I'll takje care of your problem, just check your e-mail. Thanks!

['Cuda Hunter]

  Paypal payment has been sent.  Thanks again for the help everyone.  This plug that I am getting should take care of the problem. 

[Moparal]

  I can't swap switch's because the 73 goes in my 73. I just removed it as I was trying to figure out differences.  The 73 is now back in it's home.  The 70 doesn't have a wiper motor yet.  I just had the switch so I am trying to build upon that. 
  Moparal, Why do you say that the two speed has the foor pump washer?  I havn't played with one of those yet.
  The wiring harness in my 70 is not originally from that car.  I had nothing to start with. 

I really havent seen a 2 speed switch for an e body with electric wash.   I do on the otherhand have an nos 73 3 speed wiper motor im not useing

[bb71challenger]

Anyone have an extra 3 speed motor switch? I have a 2 speed and am wanting to go back with a 3 speed wiper.

['Cuda Hunter]

bb71challenger
  PM me and I will try to remember to go out and see if I have one that works.  I had one but not sure if I still do.  I might have given it to a buddy of mine who needed one.
   Moparal
  PM me a price.  73 isn't really what I am looking for but maybe we can work something. 

[Moparal]

Ok, I think I have a used 71 3 spd also

['Cuda Hunter]

  Now were talkin.

['Cuda Hunter]

  The plug I just recieved is not the correct plug. The two plugs I recieved are off of two different year barracuda harness's. 
 The one on the left is the one I am trying to get.  I will try to get a closer picture later.
  The one on the right is a 73 two speed switch.


 I need a plug that fits a switch with the part number of
  2947404  23199
      2029

  This car is an early built 9th month of 69  barracuda.  The switch looks to have been there for some time.