Author Topic: A/C Maplight plastic and harness  (Read 1261 times)

Offline moparclown

  • Resident
  • *****
  • Posts: 4335
A/C Maplight plastic and harness
« on: January 07, 2008 - 07:18:29 PM »
I restored this plastic trim which was broken in two,but my ? is do you see anything out of the ordinary in this harness?
OOPS,give me five to get some pics?I thought I had some.




Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: A/C Maplight plastic and harness
« Reply #1 on: January 07, 2008 - 07:21:08 PM »
 :useless:

Sorry, I had to...  :misbehaving:

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline moparclown

  • Resident
  • *****
  • Posts: 4335
Re: A/C Maplight plastic and harness
« Reply #2 on: January 07, 2008 - 07:26:26 PM »
Man your fast :roflsmiley:
Heres the pic

Offline DAYLEY/CHALLENGER

  • Resident
  • *****
  • Posts: 3157
  • Still My Inspiration..1971, Rockingham, Nc
Re: A/C Maplight plastic and harness
« Reply #3 on: January 07, 2008 - 07:46:33 PM »
Well it looks like you also got an ashtray light and a bunch of other plugins like I have under my dash that don't go anywhere!!!   :bigsmile:
Dave or David

Offline moparclown

  • Resident
  • *****
  • Posts: 4335
Re: A/C Maplight plastic and harness
« Reply #4 on: January 09, 2008 - 06:10:56 PM »
I don't think its an ashtray light,but I could be wrong?Is it for the light bar and is it for light to shine down to the ignition?If so is this supposed to plug into the door switches?

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: A/C Maplight plastic and harness
« Reply #5 on: January 09, 2008 - 07:24:12 PM »
I don't think its an ashtray light,but I could be wrong?Is it for the light bar and is it for light to shine down to the ignition?If so is this supposed to plug into the door switches?

Oh crap!!  :banghead:

  Without tearing my car apart, that either fits in to the far left side of the dash light bar(my guess is it goes in that slot in your pic), or it fits in to the underside of the switch bezel.


  Mike
« Last Edit: January 09, 2008 - 07:26:01 PM by MEK-Dangerfield »

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: A/C Maplight plastic and harness
« Reply #6 on: January 09, 2008 - 07:29:57 PM »
OK, I over-rule myself.  ::)  That looks like it goes into the far left end side of the dash light bar. Again, I'm willing to take mine apart, but please don't make me.  :lol:  :lol2:


  Mike

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline miketyler

  • Resident
  • *****
  • Posts: 2561
    • www.miketyler.net
Re: A/C Maplight plastic and harness
« Reply #7 on: January 09, 2008 - 07:45:04 PM »
Looks like its tied to the time delay unit. My guess is either the iginition key light or the LH switch panel light. Both come on when you opne the door and stay lit 10-15 seconds after you close the door
72' Cuda restomod
70 Mustang Mach 1
07' Toyota Tacoma Prerunner Dbl cab in Speedway Blue!
01' Honda 1100 Shadow Sabre
96' Seadoo Challenger

Offline moparclown

  • Resident
  • *****
  • Posts: 4335
Re: A/C Maplight plastic and harness
« Reply #8 on: January 09, 2008 - 08:40:02 PM »
Thats what I was thinking and the way the little cap is cut it looks to shine right to the ignition :crazy:I almost sold this set up last week on e-bay,now its cleaned and ready to be used on my Cuda. :woo: