Chryco will these work

[Burpin Chunks]

Chryco, will these rims work on my 71 dart with 1" spacer on the rear. I know the bolt pattern is correct but im worried about the little backspacing.

http://cgi.ebay.com/ebaymotors/5-14-5-x-4-5-aluminum-slot-wheels-ansen-with-tires_W0QQcmdZViewItemQQcategoryZ66480QQihZ011QQitemZ320207333331QQrdZ1QQsspagenameZWDVW

[MEK-Dangerfield]

With a spacer, it should work.


  Not Chryco.   

[Bullitt-]

4.5" bolt pattern ?!?!   if so a member here down in TX is selling his wheels & tires off his
   e-body... miketyler

Da Bullitt

[Burpin Chunks]

is it wheels and tires, and how much and what are the deminsions. I have no problem buying from your friend. Whats his number or your number or if you prefer my number. I dont care.

[Chryco Psycho]

you will have to take careful measurements to make sure the backspacing will work , my hunch is it will push the wheel out to far & rub the fender

[Bullitt-]

is it wheels and tires, and how much and what are the deminsions. I have no problem buying from your friend. Whats his number or your number or if you prefer my number. I dont care.

link to his add
http://www.cuda-challenger.com/cc/index.php?topic=39165.0