Shoulder belts for 1970 Cuda Convertible...

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Shoulder belts for 1970 Cuda Convertible...  (Read 1543 times)

    Offline elevenssc

    • Jr. Member
    • **
    • Posts: 226
    Shoulder belts for 1970 Cuda Convertible...
    « on: January 22, 2008 - 09:44:04 PM »
    Has anyone upgraded to shoulder belts / 3-point belts into an E-body convertible?  Paddock has a conversion for the front seats, but am curious if anyone else has done this, and where did you get the belts? 

    Any info advice on getting shoulder belts into the back seats?

    Thanks...
    Logged


    Alaskan_TA

    • Guest
    Re: Shoulder belts for 1970 Cuda Convertible...
    « Reply #1 on: January 22, 2008 - 11:56:44 PM »
    Welcome to the site!

    Front shoulder belts in the covertibles;

    http://www.hamtramck-historical.com/images/engineeringDrawings/ei156.jpg

    Rear seat shoulder belts, (not available in a convertible) ;

    http://www.hamtramck-historical.com/images/engineeringDrawings/ei157.jpg

    Logged

    Offline 4Cruizn

    • Administrator
    • C-C.com Expert
    • *****
    • Posts: 18521
    • HEMI FISH
    Re: Shoulder belts for 1970 Cuda Convertible...
    « Reply #2 on: January 23, 2008 - 12:07:40 AM »
    Shoulder belts would be interesting but I haven't got that far.  Just to have seat belt would be a break though for me. lol 
    Logged

    Offline hemiken

    • Sr. Resident
    • ******
    • Posts: 8785
    • Hemi-fied Mopar in Australia
    Re: Shoulder belts for 1970 Cuda Convertible...
    « Reply #3 on: January 23, 2008 - 02:42:08 AM »
    How often would those shoulder belts keep falling off your shoulder.  What a pain in the a$$ that would be.............................................. Glad i don't have to comply to that ruling. :faint:
    Logged
    1970 Barracuda   (O^--^===|===^--^O)
    1971 Barracuda   (O O {]{]{]|[}[}[} O O)
    1970 Challenger  (O O [======R/T=] O O)
    1971 Challenger  (O O ===== ===== O O)
    I pay homage to the best Mopars ever built.

    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: Shoulder belts for 1970 Cuda Convertible...
    « Reply #4 on: January 25, 2008 - 04:06:46 PM »
    I would have to go with a late model seat with the belt installed in the backrest.

    that drawling looks scary :crying:
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...

    Offline whitewatersky

    • Jr. Member
    • **
    • Posts: 350
    Re: Shoulder belts for 1970 Cuda Convertible...
    « Reply #5 on: April 20, 2014 - 02:50:58 AM »
    3 point front seatbelts are mandatory in Australia if post 1964.
    For my pillar less 65 Riviera coupe i set the seatbelts into the body below the back qtr widows
     i.e.just behind the shoulder of the front driver/passenger (pretty lame from a safety point of view, but at least it's legal)

    I'm thinking that Challenger convertible front seat belts could be a good guide for this

    Would anyone have these engineering drawings from this old thread?
    Or a pic of something similar

    I realize that I wouldn't want to screw up the door trim if I was to do this on a nicely finished car so i'd probably get a substandard trim to chop a hole into
    Logged
    Plum Crazy auto T/A Challenger

    Offline hemiken

    • Sr. Resident
    • ******
    • Posts: 8785
    • Hemi-fied Mopar in Australia
    Re: Shoulder belts for 1970 Cuda Convertible...
    « Reply #6 on: April 20, 2014 - 05:39:34 PM »
    Quote from: whitewatersky on April 20, 2014 - 02:50:58 AM
    3 point front seatbelts are mandatory in Australia if post 1964.
    For my pillar less 65 Riviera coupe i set the seatbelts into the body below the back qtr widows
     i.e.just behind the shoulder of the front driver/passenger (pretty lame from a safety point of view, but at least it's legal)

    I'm thinking that Challenger convertible front seat belts could be a good guide for this

    Would anyone have these engineering drawings from this old thread?
    Or a pic of something similar

    I realize that I wouldn't want to screw up the door trim if I was to do this on a nicely finished car so i'd probably get a substandard trim to chop a hole into

    I have found a way around the 3 point mounting on Mopar's here in Australia. :2thumbs:
    Logged
    1970 Barracuda   (O^--^===|===^--^O)
    1971 Barracuda   (O O {]{]{]|[}[}[} O O)
    1970 Challenger  (O O [======R/T=] O O)
    1971 Challenger  (O O ===== ===== O O)
    I pay homage to the best Mopars ever built.

    Offline whitewatersky

    • Jr. Member
    • **
    • Posts: 350
    Re: Shoulder belts for 1970 Cuda Convertible...
    « Reply #7 on: April 20, 2014 - 07:11:17 PM »
    Whoops. I shouldn't have written "Australia" as I dunno about the rest of the country outside of NSW. Will talk to about this Kenny! Thanks!


    Lookin for my first convertible 70 Challenger
    Logged
    Plum Crazy auto T/A Challenger
    Pages: [1]
    « previous next »