ARP bolts

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: ARP bolts  (Read 1477 times)

    Swedefish

    • Guest
    ARP bolts
    « on: January 27, 2008 - 09:18:20 AM »
    I`m upgrading my 383 engine
    I wonder if it would be necessary to go with ARP bolts in the shortblock?

    calculated CR 9.98
    mopar purple 284/484
    915 heads with bigger valves
    Mopar Muscle did a similair build and they had 451 hp on the dyno.
    However, they used a comp cam ,509 lift

    Logged


    Offline hemiken

    • Sr. Resident
    • ******
    • Posts: 8785
    • Hemi-fied Mopar in Australia
    Re: ARP bolts
    « Reply #1 on: January 27, 2008 - 09:20:24 AM »
    If you are going to spend the money on bolts, you may aswell buy studs instead for a little bit extra.  But in reality with the compression and cam selection, you really do not need to upgrade the bolts buddy. :2thumbs:
    Logged
    1970 Barracuda   (O^--^===|===^--^O)
    1971 Barracuda   (O O {]{]{]|[}[}[} O O)
    1970 Challenger  (O O [======R/T=] O O)
    1971 Challenger  (O O ===== ===== O O)
    I pay homage to the best Mopars ever built.

    Offline 6packCuda

    • Sr. Member
    • ****
    • Posts: 1932
    • Eagle, NE... Member since 11/17/06
    Re: ARP bolts
    « Reply #2 on: January 27, 2008 - 09:53:31 AM »
    I would at least put ARP rod bolts. Other than that, you should be ok.
    Logged
    Dave

    Offline FJ5_440

    • Full Member
    • ***
    • Posts: 879
    • Wisconsin
    Re: ARP bolts
    « Reply #3 on: January 27, 2008 - 10:38:56 AM »
     :iagree:
    ARP rod bolts are a must.  I would be careful with using head studs, as Chryco has said the heads cannot be removed while the engine is in the car if head studs are used.  I am not sure if that is true of a 383 but would check into it before using them on a street engine.
    Logged
    ** Shane **

    Offline CrazyPete

    • Full Member
    • ***
    • Posts: 978
    Re: ARP bolts
    « Reply #4 on: January 27, 2008 - 11:43:43 AM »
    if you dont spend the money for the ARP's at least buy new OEM style bolts gotta remember there 40 years old now
    Logged

    1970 Dodge Challenger T/A      http://heartlandmopars.com
    1970 Plymouth Barracuda Gran Coupe
    1976 Dodge Dart Sport
    "Is that an oil leak?  No it's just sweat from all that HORSEPOWER"

    Swedefish

    • Guest
    Re: ARP bolts
    « Reply #5 on: January 27, 2008 - 12:22:21 PM »
    Thanks guys
    Quote from: CrazyPete on January 27, 2008 - 11:43:43 AM
    gotta remember there 40 years old now
    Yes, thats whats crossed my mind too.

    Quote from: FJ5_440 on January 27, 2008 - 10:38:56 AM
    I would be careful with using head studs, as Chryco has said the heads cannot be removed while the engine is in the car if head studs are used.  I am not sure if that is true of a 383 but would check into it before using them on a street engine.
    I believe that it`s true at least on the drivers side.
    Logged

    Offline Belgium Cuda

    • Full Member
    • ***
    • Posts: 794
    • Living in Belgium but beeing Swedish
    Re: ARP bolts
    « Reply #6 on: January 27, 2008 - 02:08:40 PM »

     kul med andra Svenskar här pâ forumet  :cheers:
    Logged
    1970 Challenger Convertible - to become a Hemi tribute
    1968 Charger R/T 500 cui stroker

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: ARP bolts
    « Reply #7 on: January 27, 2008 - 04:14:21 PM »
    the new rods bolts are a Must ,main stud can be used with ease  head studs are not needed
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline ViperMan

    • Resident
    • *****
    • Posts: 3989
    • 2017 Carlisle or BUST...
      • JS Custom Cars
    Re: ARP bolts
    « Reply #8 on: January 28, 2008 - 09:58:35 AM »
    The head bolts are torque-to-yield, aren't they?  Once used and tightened to spec, they cannot be used again.

    Jeff
    Logged
    2000 Dodge Viper GTS Coupe - 8.0L V10, 6-Speed Tremec
    2005 Jeep Grand Cherokee Limited - Trail Rated - 4.7L V8, Auto
    2010 Dodge Challenger SE Rallye - 3.5L V6, Auto (Wife's!)

    Swedefish

    • Guest
    Re: ARP bolts
    « Reply #9 on: January 28, 2008 - 10:46:28 AM »
    Quote from: 73Barracuda on January 28, 2008 - 09:58:35 AM
    The head bolts are torque-to-yield, aren't they?  Once used and tightened to spec, they cannot be used again.

    Jeff
    So I`ve heard too, but I`ve never replaced any head bolts before.
    Quote from: Belgium Cuda on January 27, 2008 - 02:08:40 PM
    kul med andra Svenskar här pâ forumet  :cheers:
    Hi belgium cuda,
    Yeah, we`re quite a few from Scandinavia on here. Gurra Gas used to visit C-C.com too but I haven`t seen him around for a while.
    How are things going with your Cuda?
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: ARP bolts
    « Reply #10 on: January 28, 2008 - 12:56:24 PM »
    Old engines do not use a torque to yeild head bolt & they can be reused with no issue
     personally I hate the TTY bolts just give me a stronger bolt & a consistant torque setting 
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline dodge freak 2

    • Full Member
    • ***
    • Posts: 825
    Re: ARP bolts
    « Reply #11 on: January 28, 2008 - 05:19:50 PM »
    Some head studs now have a hex shape on top of the stud, this way you can remove the stud in the engine bay.

    I was told on new head bolts, thats is only $55 or so, if you can swing it, do it.
    Logged
    Pages: [1]
    « previous next »