Modified rallye dash

[422STROKER]

What would you guys pay for something like this?

No harness, aftermarket tach.

Tom

[MEK-Dangerfield]

Do you want the aftermarket tach? 

If not, hopefully the hole hasn't been enlarged, so you could put an original back in there. You have to figure the clock needs a quartz conversion. Does the reset knob come with it? The 4-gauge cluster looks like they all work to me. Does this have the voltage limiter and wiring for those little gauges? This is a toughie!! 

I would most definitely pay $350. My top limit... maybe $500 or so, depending on the answers to my questions. 


  Mike

[422STROKER]

I'll ask for a backside photo.    

Also ask about the hole for the tach, since I would rather have a factory one.

Tom

Price is inline with your lower #.

[73Chally]

To be honest, I would have to say that setup is worth probably $600+ easy, assuming the gauges are all good and you can put in the correct tac.  You might even do better selling the stuff individually.  the light bar alone is worth $100+ if it is in good working order.  A word of advice, though, is spend the $25 for a new woodgrain overlay to put on over the carbon fiber overlay, and you will easily get back that money and a lot more.  As crazy as these things are selling for, I would say you could possibly get up to $800.  Complete, restored sets are selling for over $2K on Ebay.  The only thing you're missing is the harness and heater panel.  A set of just the gauge pod (gauges, bezel, housing, clear lens) bid up to over $600 and did not meet reserve last week.

[Challenger6pak]

I would put a stock tac back in it along with new woodgrain.  Then it will sell for more and faster.  If it wasn't in nice condition I would say sell as is.  It looks too nice to miss the opportunity to finish it out. . 

[422STROKER]

I was going to buy it for me.  Have a chance at around 350 for it.  So i guess it would be a good deal.  No shipping helps too.

Tom

Still waiting on the backside photos too.

I kinda like the CF and could always change it later.

[MEK-Dangerfield]

Guys, just a note. This is a later years dash. NO way it is going for anywhere close to $1000.

[422STROKER]

Ok, so I got some pics of the backside, I honestly don't know what I'm looking at but it looks to me that something was modified to fit the tach.  The million dollar question is can a factory tach be put back in?

MEK you were right the clock needs quartz upgrade.  No reset for it but the reset for the speedo is there. 

He says the 4 guages bench tested ok.

WWYD?

Tom

[422STROKER]

And to add to this how much is a harness for this? and how much for a heater switch panel.  I got seperate leads on these locally as well.

Tom