Orginal kickdown linkage and a holley

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Orginal kickdown linkage and a holley  (Read 827 times)

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Orginal kickdown linkage and a holley
    « on: February 06, 2008 - 03:18:05 PM »


    HI Guys

    I will hear you guys are the possible to get a conversion kit so my orginal kickdown linkage will bolt on a Holley.
    Maybe a picture of the setup   :)


    1970 Challenger 318 Cui.

    Thanks

    Dennis

    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#


    Offline Bullitt-

    • Permanent Resident
    • *******
    • Posts: 12167
    • Better Things To Come Member Since 2/16/06
    Re: Orginal kickdown linkage and a holley
    « Reply #1 on: February 06, 2008 - 09:03:59 PM »
    I've seen lot's of guys fighting with this issue, seems the 4 barrel as well as the new intake create all kinds of issues with how things relate to each other. Bassically you should be able to move the throttle stud off your OE carb to the Holley but getting all of the linkages to line up and work correctly will take lots of custom work....Easy way out is a kit from http://www.bouchillonperformance.com/BPEtkdcInstructionsNEW.asp
    Logged
    Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
    Screwed by Photobucket!

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Orginal kickdown linkage and a holley
    « Reply #2 on: February 06, 2008 - 09:27:43 PM »
    the 20-7 carb adapter will help put the pin in the correct position , the manifold may still mount the carb further forward or back or higher so you will still need to adjust usually
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline Danishmopar

    • Jr. Member
    • **
    • Posts: 337
    • 70´ Challenger. Denmark, scandinavien.
      • Overhauling 70´Challenger
    Re: Orginal kickdown linkage and a holley
    « Reply #3 on: February 07, 2008 - 04:51:36 PM »


    Thanks for your answers guys  :thumbsup:

    may I ask what a 20-7 carb adapter are  :clueless:

    Thanks

    Dennis
    Logged
    Work and Supportet your forces at 821st Air Base Group. Thule AB, Greenland
    Pictures of My challenger: http://picasaweb.google.dk/dennisogkatja/Overhauling70Challenger#

    Offline 73plymouth

    • Jr. Member
    • **
    • Posts: 32
    Re: Orginal kickdown linkage and a holley
    « Reply #4 on: February 07, 2008 - 11:38:20 PM »
    Quote from: Danishmopar on February 07, 2008 - 04:51:36 PM

    Thanks for your answers guys  :thumbsup:

    may I ask what a 20-7 carb adapter are  :clueless:

    Thanks

    Dennis


    Here's a link for you   http://store.summitracing.com/partdetail.asp?part=HLY-20-7
    It's just a little arm that adapts the aftermarket Holley carbs to work with the Mopar linkage, they work good :thumbsup:
    « Last Edit: February 07, 2008 - 11:39:59 PM by 73plymouth »
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Orginal kickdown linkage and a holley
    « Reply #5 on: February 07, 2008 - 11:49:17 PM »
    Thanks 73 P
    Logged

    Challenger - You`ll wish You Hadn`t
    Pages: [1]
    « previous next »