Author Topic: .92 Torsion Bars  (Read 2444 times)

Offline ChallengerHK

  • Sr. Resident
  • ******
  • Posts: 7338
  • I'm working on it - No, really
.92 Torsion Bars
« on: February 12, 2008 - 10:44:31 PM »
While I'm out of work I'm doing part of the front suspension job, the part that will be cheap(er) since I've already bought most of the parts. I initially didn't think that 30 year old t-bars would have any value, but somebody told me that drag racers want the thinner bars. True? If so, any idea as to value?


"She'll make point five past light speed. She may not look like much, but she's got it where it counts, and I've made a lot of special modifications myself."

- Han Solo, Star Wars

Advice Thread - Taking Pictures Of Cars




Offline ChallengerHK

  • Sr. Resident
  • ******
  • Posts: 7338
  • I'm working on it - No, really
Re: .92 Torsion Bars
« Reply #1 on: February 18, 2008 - 08:08:00 PM »
Bump


"She'll make point five past light speed. She may not look like much, but she's got it where it counts, and I've made a lot of special modifications myself."

- Han Solo, Star Wars

Advice Thread - Taking Pictures Of Cars

Offline Katfish

  • Resident
  • *****
  • Posts: 3733
  • 70 Challenger
Re: .92 Torsion Bars
« Reply #2 on: February 18, 2008 - 08:41:25 PM »
Are you talking about selling your original t-bars?  0.92 is not small.

I sold my original 0.86 bars on ebay for $60, cost $22 to ship, minus the paypal and fees, cleared $30.
Not much, but better than just throwing them away.

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: .92 Torsion Bars
« Reply #3 on: February 18, 2008 - 08:50:08 PM »
You could be like me and be a pack rat for when someone might need them. I would guess 50 would be a good average.

Offline ChallengerHK

  • Sr. Resident
  • ******
  • Posts: 7338
  • I'm working on it - No, really
Re: .92 Torsion Bars
« Reply #4 on: February 18, 2008 - 09:24:56 PM »
Thanks for the info, guys.

Katfish - That's why I said "thinner" and not " thinnest"  :bigsmile:

Al - I've been a packrat for too many years already. I couldn't figure out when I moved into the house why it was so empty, then I realized that the garage is full to the brim  :bigsmile:


"She'll make point five past light speed. She may not look like much, but she's got it where it counts, and I've made a lot of special modifications myself."

- Han Solo, Star Wars

Advice Thread - Taking Pictures Of Cars

Offline HP2

  • Resident
  • *****
  • Posts: 4478
Re: .92 Torsion Bars
« Reply #5 on: February 19, 2008 - 07:21:55 AM »
.92 is the size of bar originally used in Hemi cars, so its reasonably stout. Since new sets are $300+, you might be able to ebay them for $100 or more.

Offline ChallengerHK

  • Sr. Resident
  • ******
  • Posts: 7338
  • I'm working on it - No, really
Re: .92 Torsion Bars
« Reply #6 on: February 19, 2008 - 10:32:23 AM »
That'll teach me to rely on my memory. I thought that:

.86 mostly came in slant 6 cars
.92 mostly came in small block cars
.96 mostly came in big block cars



"She'll make point five past light speed. She may not look like much, but she's got it where it counts, and I've made a lot of special modifications myself."

- Han Solo, Star Wars

Advice Thread - Taking Pictures Of Cars

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: .92 Torsion Bars
« Reply #7 on: February 19, 2008 - 11:42:37 AM »
That'll teach me to rely on my memory. I thought that:

.86 mostly came in slant 6 cars
.92 mostly came in small block cars
.96 mostly came in big block cars




  I kinda agree with you here.  .92 seems small for a big-block.

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline HP2

  • Resident
  • *****
  • Posts: 4478
Re: .92 Torsion Bars
« Reply #8 on: February 20, 2008 - 08:49:01 AM »
Ahh, you skipped a couple of sizes.

.86 six bangers
.88 small blocks
.90 big blocks
.92 hemi, six paks

Roughly. I think a/c equiped cars recieved the next size bigger. It wasn't until the post 73 B bodies with isolated suspension that bars started getting into .94, .96, and .98 sizing.

For about the last ten years or so I've been recommending .96 for small block and 1.0 for big block cars that want late model equivilent handling with a decent ride.
« Last Edit: February 20, 2008 - 10:44:25 AM by HP2 »

Offline ChallengerHK

  • Sr. Resident
  • ******
  • Posts: 7338
  • I'm working on it - No, really
Re: .92 Torsion Bars
« Reply #9 on: February 20, 2008 - 09:57:09 AM »
Well, that explains Katfish's response. Looks like I was way off.


"She'll make point five past light speed. She may not look like much, but she's got it where it counts, and I've made a lot of special modifications myself."

- Han Solo, Star Wars

Advice Thread - Taking Pictures Of Cars

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: .92 Torsion Bars
« Reply #10 on: February 24, 2008 - 02:42:37 AM »
they make a great pry bar !!

Challenger - You`ll wish You Hadn`t

Offline ChallengerHK

  • Sr. Resident
  • ******
  • Posts: 7338
  • I'm working on it - No, really
Re: .92 Torsion Bars
« Reply #11 on: February 24, 2008 - 08:25:13 AM »
 :rofl:


"She'll make point five past light speed. She may not look like much, but she's got it where it counts, and I've made a lot of special modifications myself."

- Han Solo, Star Wars

Advice Thread - Taking Pictures Of Cars