Author Topic: 340 heads  (Read 1197 times)

Offline Fishy68

  • Jr. Member
  • **
  • Posts: 37
340 heads
« on: February 21, 2008 - 01:09:06 PM »
For sale is a set of small block heads originally off a 73 340. They are 587 castings and have had 2.02 valves installed. They only have about 30,000 miles run time since having the new valves installed. They also have the Mopar perf. single springs with dampers. The bowl area was cleaned up after the installation of the larger valves but no other porting was done. They had been stored in a garage attic for the last 10-12 yrs. uncovered and they were pretty filthy so I power washed them off and allot of the paint blew off. I have visually checked these over very thouroughly for any stripped bolt holes or cracks and found no problem at all with them but I would recommend installing new valve seals before use. They will also need some more cleaning to remove the rest of old gaskets.

These were the original heads from a buddies 73 Cuda and with a mild cam he ran 13.70's with it back when they were on it.

$225 plus shipping. Shipping will run somewhere between $60-$80 depending where you are.

I will be going to the Indy Heads swap meet on Mar. 1 so if your interested in them and are going I can bring them with me to save you shipping costs.

Please note that they say 360 in the valve area. I believe all small block heads after 71 said 360 on them even if they were on a 340.

E-mail is catrac at frontiernet.net and ph. # is 217-556-2800.

I'm located halfway between St.Louis and Springfield IL. 10 miles s.w. of Litchfield IL.

Thanks, Tracy
68 Cuda. 360/727 4:10 SG.
02 Dakota Sport 4.7/auto




Offline ereru7

  • Jr. Member
  • **
  • Posts: 17
Re: 340 heads
« Reply #1 on: February 25, 2008 - 04:41:37 PM »
trade for a 4 speed out of challenger?? im on the il/in border up north.

Offline Fishy68

  • Jr. Member
  • **
  • Posts: 37
Re: 340 heads
« Reply #2 on: February 25, 2008 - 09:04:12 PM »
trade for a 4 speed out of challenger?? im on the il/in border up north.

Sorry but I don't need a trans.

Thanks for asking. Tracy
68 Cuda. 360/727 4:10 SG.
02 Dakota Sport 4.7/auto

Offline fantum

  • Jr. Member
  • **
  • Posts: 429
Re: 340 heads
« Reply #3 on: March 03, 2008 - 04:54:35 PM »
I'm game.  How much to ship to Miami?  Remember, like almost everyone on this site, I'm on a tight budget.

Thanks,


fantum
Mike

Offline Fishy68

  • Jr. Member
  • **
  • Posts: 37
Re: 340 heads
« Reply #4 on: March 03, 2008 - 09:18:17 PM »
Hi Fantum. I may have them sold. I had a guy contact me a couple days ago and say he want's them and is supposed to be sending the money. I'll post an update in a few days as to wether or not he came through.

Thanks, Tracy
68 Cuda. 360/727 4:10 SG.
02 Dakota Sport 4.7/auto

Offline fantum

  • Jr. Member
  • **
  • Posts: 429
Re: 340 heads
« Reply #5 on: March 03, 2008 - 10:50:50 PM »
POOH, RATS, DARN, FUDGE!!!!!!!!!!!!!!!   :swear: :swear: :swear: :swear: :banghead:  That's the way it's gone recently, a day late and a dollar short.......


Oh well, let me know if he doesn't come through.


fantum
Mike

Offline Fishy68

  • Jr. Member
  • **
  • Posts: 37
Re: 340 heads
« Reply #6 on: March 04, 2008 - 12:01:22 AM »
Man I know the feeling. I missed out on a good deal for some rocker arms this past saturday at the Indyhead swap meet. I thought I'd look around and see if there was any better deal there. Of course there wasn't and when I went back they were gone. :banghead:

I'll let you know if he don't come through.
68 Cuda. 360/727 4:10 SG.
02 Dakota Sport 4.7/auto