Author Topic: Safety First  (Read 1623 times)

Offline ChallengerHK

  • Moderator
  • Sr. Resident
  • *****
  • Posts: 7338
  • I'm working on it - No, really
Safety First
« on: March 05, 2008 - 04:18:02 PM »
or "Why we should always wear goggles" or "Stupid thing # 4551."

I was getting some pieces ready to paint today, applying thedegreaser/etcher for POR-15. Moving from one point to another, as I lowered myself back down I put one hand on the bumper to steady myself ... and my finger closer on the mister trigger. I spritzed myself right in the eye with that sh!t. In about a quarter second my eyeball was on fire and I was running for the shower with one eye open, so I had no depth perception and kept bumping into crap.  :stomp:

20/20 hindsight (at least I hope it's still 20/20  :bigsmile:) it's funny, though.


"She'll make point five past light speed. She may not look like much, but she's got it where it counts, and I've made a lot of special modifications myself."

- Han Solo, Star Wars

Advice Thread - Taking Pictures Of Cars




Offline Stacked440

  • Sr. Member
  • ****
  • Posts: 1026
Re: Safety First
« Reply #1 on: March 05, 2008 - 05:02:57 PM »
 :roflsmiley:  I know I shouldn't laugh at that but I do that kind of stuff sometimes to lol.  lucky part is any part of your eye that burned off is probably already healed as the eye is one of the fastest healing parts of your body :thumbsup:
-Kyle-
1971 Challenger R/T clone 440/5-spd
1973 Duster - 5.7L Hemi swap project

Offline Rare_T_A

  • Resident
  • *****
  • Posts: 3916
    • Freiss Family Mopar Site
Re: Safety First
« Reply #2 on: March 05, 2008 - 05:48:17 PM »
I know were your comming from. A few years ago I was in the emergancy room so many times that summer they started to call me Tim Taylor!
'09 Challenger R/T  5.7 HEMI Auto
'70Challenger T/A 340 727

Fargo, N. Dak.
My web Site:  http://freiss.co.nr

My Flikr Page: http://www.flickr.com/photos/102813164@N04/

I was born with nothing and I still have most of it left!

Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5392
Re: Safety First
« Reply #3 on: March 05, 2008 - 05:53:29 PM »
since ill be going into the field, i'll be picking up some OSHA Perscription Safety Glasses before i get too heavy in it. To protect myself, from...myself lol. I'm pretty on it about hearing, jack stands and such.
Build Page: Goody's 'Cuda Build Page
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum

Wheel & Tire Specs:Link

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Safety First
« Reply #4 on: March 05, 2008 - 06:16:44 PM »
Yup, learned long ago to at least wear some glasses.  Been wearing goggles lately though.  I snapped a 1/8" drill bit and had it bounce up straight into my right eye a few years ago.  I put safety glasses on before my wife walked in and told her it went around them.LOL  She drove me to the E-room...

Tom :violin:
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline ChallengerHK

  • Moderator
  • Sr. Resident
  • *****
  • Posts: 7338
  • I'm working on it - No, really
Re: Safety First
« Reply #5 on: March 05, 2008 - 06:20:28 PM »
Yup, learned long ago to at least wear some glasses. 

Actually, I wear glasses, but this came in from the side  :swear:


"She'll make point five past light speed. She may not look like much, but she's got it where it counts, and I've made a lot of special modifications myself."

- Han Solo, Star Wars

Advice Thread - Taking Pictures Of Cars

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Safety First
« Reply #6 on: March 05, 2008 - 06:42:54 PM »
Actually, I wear glasses, but this came in from the side  :swear:

 :faint:  Figures LOL

Tom :sadwavey:
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Safety First
« Reply #7 on: March 05, 2008 - 08:07:31 PM »
I am glad your ok> Paint stripper in the eyes is very serious.  I wear safety glasses with side shields whenever I work on my car or in my shop. I never go without the side shields

Glad your ok :2thumbs:

Offline ChallengerHK

  • Moderator
  • Sr. Resident
  • *****
  • Posts: 7338
  • I'm working on it - No, really
Re: Safety First
« Reply #8 on: March 05, 2008 - 08:31:57 PM »
Thanks, Al. I knew it was pretty serious which is why I went for the shower instead of the sink. I wanted to soak it good.


"She'll make point five past light speed. She may not look like much, but she's got it where it counts, and I've made a lot of special modifications myself."

- Han Solo, Star Wars

Advice Thread - Taking Pictures Of Cars

Offline Street_Challenged73

  • Sr. Resident
  • ******
  • Posts: 8826
  • '73 FC-7 Challenger..Member since October 20, 2002
    • My '73 Challenger Restoration Page
Re: Safety First
« Reply #9 on: March 05, 2008 - 09:51:59 PM »
That's good to hear you got it rinsed well.  I've never really gotten much more than small dust particles/dirt in my eyes, but I have been blasted with gasoline in my mouth.  Talk about a bad tasting experience.
1973 Dodge Challenger......................The ongoing project. (00/----\00)
1991 Dodge Stealth R/T Twin-Turbo....The sunny day cruiser (RTBoost)
1990 Toyota Celica GT Liftback...........The new daily & winter driver.
All-American Muscle: 'Cudas and Challengers...Still the Elite and always will be.

                                                                                             
                 
Street_Challenged73 from Wisconsin

Offline RDF

  • Sr. Member
  • ****
  • Posts: 1840
  • The pain that greets me is the stick that beats me
Re: Safety First
« Reply #10 on: March 05, 2008 - 10:09:25 PM »
I'm getting used to soldering guns now that I've been branded for life!  :roflsmiley:
Bob

1973 'Cuda

If we never drown we'll never know how well it tastes....So tell me how it tastes and I'll know just how well you drowned.

My build:
http://www.cuda-challenger.com/cc/index.php?topic=45749.0

Offline ViperMan

  • Resident
  • *****
  • Posts: 3989
  • 2017 Carlisle or BUST...
    • JS Custom Cars
Re: Safety First
« Reply #11 on: March 05, 2008 - 10:18:50 PM »
When I worked at Ford, I was spraying brake cleaner up around a newly installed oil filter and drain plug (basically just finished an oil change) and was inspecting the underside to make sure I didn't miss anything when a drop of brake clean dripped from the oil pan and landed RIGHT IN MY EYE...  Ever had brake clean in your eye?  Wow...  New kind of pain...

Jeff
2000 Dodge Viper GTS Coupe - 8.0L V10, 6-Speed Tremec
2005 Jeep Grand Cherokee Limited - Trail Rated - 4.7L V8, Auto
2010 Dodge Challenger SE Rallye - 3.5L V6, Auto (Wife's!)

Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5392
Re: Safety First
« Reply #12 on: March 05, 2008 - 10:20:31 PM »
I'm getting used to soldering guns now that I've been branded for life!  :roflsmiley:


 :lol:
Build Page: Goody's 'Cuda Build Page
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum

Wheel & Tire Specs:Link

nivvy

  • Guest
Re: Safety First
« Reply #13 on: March 05, 2008 - 10:20:39 PM »
When I worked at Ford, I was spraying brake cleaner up around a newly installed oil filter and drain plug (basically just finished an oil change) and was inspecting the underside to make sure I didn't miss anything when a drop of brake clean dripped from the oil pan and landed RIGHT IN MY EYE...  Ever had brake clean in your eye?  Wow...  New kind of pain...

Jeff

i got Hot Wing Sauce in my eye once        :scared:

Offline RDF

  • Sr. Member
  • ****
  • Posts: 1840
  • The pain that greets me is the stick that beats me
Re: Safety First
« Reply #14 on: March 06, 2008 - 09:01:53 AM »
i got Hot Wing Sauce in my eye once        :scared:

 :screwy:  :nono:  :clueless:

 :roflsmiley:
Bob

1973 'Cuda

If we never drown we'll never know how well it tastes....So tell me how it tastes and I'll know just how well you drowned.

My build:
http://www.cuda-challenger.com/cc/index.php?topic=45749.0