Need pic of 72-74 electric washer bottle installed ** Updated**

[422STROKER]

I looked in the archives but all the pics are gonzo, bullitt had some but they were gone.

Anybody have a pic of one installed?  I need to see how much room is near the radiator.  I have never had one for this car and would like to put one in but have an overflow can mounted next to the rad now.
Thanks
Tom

[Bullitt-]

There's no need to fear...ole bullitts still here

[422STROKER]

Awesome!  Hey does the washer bottle butt right up against the radiator?  Is there a gap to the core support at all? 

Thanks that will help a bunch

Tom

[VTMopar]

There is a lot of room .... see attached from my '74....

Vermont MOPAR

[422STROKER]

Thanks VT!

That should help too.  It looks like it will sit right on the frame rail all the way to the rad support.  Having space above it near the rad support.

Thanks
Tom

[Bullitt-]

Took some measurements .....front to back from radiator support vertical from flat of inner fender.....#s are close use your washer bottle as template

[422STROKER]

Awesome bullitt99!

You don't happen to have a photo of the bottle looking straight down along the rad support area do you?  Eitherway those measurements are great for locating it.

Thanks again

Tom

[Bullitt-]

I don't & was gonna get you more pics but the camera's on a road trip today


Da Bullitt.

[422STROKER]

I don't & was gonna get you more pics but the camera's on a road trip today


Da Bullitt.

Appreciate the thoughts.  If you get a chance I'd be grateful, I'd hate to buy the bottle and have it not fit with my aluminum radiator and overflow set-up.

Thanks Again

Tom

[Super Blue 72]

Hope these help, you can look at the holes on the radiator support for reference to positions, factory '72 Challenger setup, 340, I think it's a 22" radiator, whatever was stock back then. 

[422STROKER]

Perfect Superblue72!

I won't be able to use the overflow I got now.LOL  Unless one of the earlier year bottles will work.
Tom

[Super Blue 72]

   Check out the overflow bottle I have tied to the radiator support with twine!!!   

It's an old washer fluid bottle.  It'll match your new aluminum radiator really well!!!     


Other ideas....     



A size for every space... you might need the 12oz bottle in such a tight space.


You may need to replace this bottle every few days....     

[422STROKER]

 

Yeah I saw the one you got, I had an anifreeze bottle in mine before.

I got a nice Overflow can but I'm pretty sure that it will be in the way of the Wiper Bottle.  Unless I move it to the other side of the rad support.

Tom

I might be able to squeeze it in there looking at it again.

[Bullitt-]

gimme some measurements of you overflow bottle & I'll see what I can tell.

also how much room does that radiator leave?

[422STROKER]

Room which way?  I will get some measurements tomorrow night, I have to bolt it in there.  It sits right on the frame rail hanging about 1" on top of it.  But that is measured on a radius.

Thanks Tom