Author Topic: It's finally happening!!!!  (Read 15710 times)

Offline Bills70

  • Jr. Member
  • **
  • Posts: 250
Re: It's finally happening!!!!
« Reply #60 on: December 16, 2008 - 06:32:39 PM »
Finally!! She Runs!! I got this e-mail from the guy who is doing the resto yesterday!!


She lives!!!

 

Challenger has snorted to life and run.

 

At approximately 4:30 pm Monday December 15, 2008 the Challenger was awakened after its 18 year long sleep. It sounded very throaty running with open headers. After a couple of minutes running it was decided it was best to shut it down as the oil pressure gauge on the dash does not work. An external mechanical oil pressure gauge is being hooked up so we can monitor the oil pressure while we break the engine in. We will be running it again tomorrow morning.

Any of you guys have any ideas why the oil pressure guage might not be working? I have a ralley guage  cluster! and would very much like for every thing to work! Rachelle said that everything worked when it got parked so I am wondering if maybe they forgot to hook something up? any suggestions?

thanks
Bill





Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: It's finally happening!!!!
« Reply #61 on: December 16, 2008 - 07:41:23 PM »
Check the oil pressure sending unit. If you see oil leaking out, that's a bad sign. Mine went on me.   :eek4:

The gauge itself could also be faulty, but that is evident by the needle hanging WAY low, almost out of sight.

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline bb71challenger

  • Sr. Resident
  • ******
  • Posts: 6549
Re: It's finally happening!!!!
« Reply #62 on: December 16, 2008 - 08:13:41 PM »
Congrats!!!   :clapping:    :woo:    Never trusted anything but a mechanical oil pressure gauge myself.
1971 Challenger (OO==== ====OO) getting close!
1970 Challenger (OO########OO) long ways off
*Brett*

Offline Bills70

  • Jr. Member
  • **
  • Posts: 250
Re: It's finally happening!!!!
« Reply #63 on: December 16, 2008 - 11:45:13 PM »
Check the oil pressure sending unit. If you see oil leaking out, that's a bad sign. Mine went on me.   :eek4:

The gauge itself could also be faulty, but that is evident by the needle hanging WAY low, almost out of sight.

Was yours on a ralley Dash?

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: It's finally happening!!!!
« Reply #64 on: December 17, 2008 - 12:34:58 PM »

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline Bills70

  • Jr. Member
  • **
  • Posts: 250
Re: It's finally happening!!!!
« Reply #65 on: December 20, 2008 - 03:08:12 AM »
The shop doing the resto has decided that their is a DARK cloud hanging over my car!!    :pullinghair:   the electronic distributor that had been put in before they rebuilt the engine has been discovered to have gone bad!!   :eek4:  so they purchased an MSD set up and installed that only to find out that the distributor that came with that set was bad so another one had to be ordered!! When will the bad luck STOP? I guess when you let a car sit for 18 years all kinds of bad things crop up! lets hope nothing else rears its ugly head. This is getting to be more expensive by the minute!! But I guess on the good side I will have one great sounding, fantastic looking car when they are all done! I can't wait!!   :burnout:  I have been promised and my fingers are crossed that is should be done by christmas!! BUT........ I was also promised it would be done by JUNE too! so we shall see!  Here is to hoping I will get a nice big stroker wrapped in a big blue car for christmas!!!    :cheers:
I sure hope I am having all these problems NOW so after they are done with it I won't have any more problems with the car and it will run TROUBLE FREE!!   :bananasmi   again I have my fingers crossed!!!!
« Last Edit: December 20, 2008 - 03:11:54 AM by Bills70 »

Offline hemiken

  • Sr. Resident
  • ******
  • Posts: 8785
  • Hemi-fied Mopar in Australia
Re: It's finally happening!!!!
« Reply #66 on: December 21, 2008 - 02:55:33 AM »
Hi Bill,

Good luck with your car old mate :2thumbs: i hope it all works out for you in the end. :cooldancing:
1970 Barracuda   (O^--^===|===^--^O)
1971 Barracuda   (O O {]{]{]|[}[}[} O O)
1970 Challenger  (O O [======R/T=] O O)
1971 Challenger  (O O ===== ===== O O)
I pay homage to the best Mopars ever built.

Offline 426HEMI

  • Sr. Resident
  • ******
  • Posts: 5187
  • My M46 Barracuda! Member Since:October 01, 2005
Re: It's finally happening!!!!
« Reply #67 on: December 21, 2008 - 03:13:26 AM »
Things are looking really good on your car.  Take care and will watch your progress for sure.  Gordon
Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

1970 M46 Barracuda
1998 Dodge Darango

Gordon

Offline Bills70

  • Jr. Member
  • **
  • Posts: 250
Re: It's finally happening!!!!
« Reply #68 on: January 13, 2009 - 02:57:57 AM »
Here is another update!!

The buckets went to the upholsterer and he found that the frames were rusted! NO shock there BUT he found some broken springs so he replaced those! sounds like he is going to do a GREAT JOB!! THENNNNNNN they went to move it so they could send the car to him for the new headliner and vinyl top but I think the gremlins are after this car! NOW the ignition switch has decided to give out so now on top of Everything else they had to buy another switch!!   :pullinghair:  Man this car is really turning out to be a BIG MONEY PIT!! but I believe the end product will be totally worth the money!! the tires are mounted and balanced and it went to the muffler shop for new exhaust! so now after the new interior it should be almost DONE!!   :bananasmi  just about 6 months off schedule but who's counting right?
I can't wait to get her home!!
Bill

Offline 426HEMI

  • Sr. Resident
  • ******
  • Posts: 5187
  • My M46 Barracuda! Member Since:October 01, 2005
Re: It's finally happening!!!!
« Reply #69 on: January 13, 2009 - 03:19:15 AM »
Thanks for the update!!!   I know the feeling wanting to get it home.  Have not really started on mine but gathering parts for it now.  Dont forget to post some pictures when you can.  Gordon
Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

1970 M46 Barracuda
1998 Dodge Darango

Gordon

Offline hemiken

  • Sr. Resident
  • ******
  • Posts: 8785
  • Hemi-fied Mopar in Australia
Re: It's finally happening!!!!
« Reply #70 on: January 13, 2009 - 06:49:46 AM »
Hey Bill,  Better that you find all these problems now old mate......... :dogpile: imagine all the chicky babes you can pick up once you have her up and running buddy :burnout: :2thumbs: Keep us posted, sound like it is getting closer and closer.................... :popcorn:
1970 Barracuda   (O^--^===|===^--^O)
1971 Barracuda   (O O {]{]{]|[}[}[} O O)
1970 Challenger  (O O [======R/T=] O O)
1971 Challenger  (O O ===== ===== O O)
I pay homage to the best Mopars ever built.

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: It's finally happening!!!!
« Reply #71 on: January 13, 2009 - 09:37:54 AM »
Hey Bill,  Better that you find all these problems now old mate......... :dogpile:

 :iagree:  Yep, better to find all the issues now then to have to deal with them later....  :grinyes:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline Bills70

  • Jr. Member
  • **
  • Posts: 250
Re: It's finally happening!!!!
« Reply #72 on: January 13, 2009 - 06:06:48 PM »
:iagree:  Yep, better to find all the issues now then to have to deal with them later....  :grinyes:

YEA that is what I told him! find ALL the gremlins NOW I want that thing purring like a kitten when she gets home!!   :2thumbs:   and I beleive she will be! I am SO glad I found someone I can really trust!! It might be a ford shop but OMG they are doing such a fantastic job!!   :bananasmi   and I WILL post pictures as soon as it comes back from the upholsterer!!
Bill

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: It's finally happening!!!!
« Reply #73 on: January 13, 2009 - 10:19:11 PM »
 :2thumbs:
Better to be late with no gremlins than on time & jinxed

Challenger - You`ll wish You Hadn`t

Offline Bills70

  • Jr. Member
  • **
  • Posts: 250
Re: It's finally happening!!!!
« Reply #74 on: January 15, 2009 - 02:43:26 AM »
:2thumbs:
Better to be late with no gremlins than on time & jinxed

AMEN

But I am getting anxious! they have had the car almost 1 year now and he promised it back a whole lot sooner than that!!   :stomp:  So I am going to ask him if he thinks he can have it back to me before the 1 year aniversary of him getting the car in his shop!!   :bigsmile:  I think that should be possible. Cross my fingers all they really need to do is work out the electrical problem because when it comes back from the upholsterer it is almost complete!!   :bananasmi  They just need to work out the kinks!!  Then I need to send it to the painter!  Thank god he is real slow! so he can take it right away! and he does very good and fast work!! yea!!!!!!