Tool info needed

[Chryco Psycho]

any idea why one can purchase the tool to replace the slip yolk bushing without disassembling the whole trans , I need the 904 /smaller size

[ntstlgl1970]

I have a snap on one for the 727/A-833 but they are real expensive ~$150
I have some others that I'm pretty sure are made by K-D or Lisle -should be able to get/order them at NAPA or another good parts store I think they were about $50

[tactransman]

CP, I don't see one for a 904 but the one I use does 904's and GM 350 turbo's,GM 200 Metric etc.

Like this one:

http://www.transmissionpartsusa.com/TH180_TH200_2004R_ext_housing_bushing_remover_p/300-000jt0160.htm

[tactransman]

Here is one that is universal that I have never used.  (good company/brand though)

http://atec-trans-tool.com/index.asp?PageAction=VIEWPROD&ProdID=1698

[ntstlgl1970]

CP, I don't see one for a 904 but the one I use does 904's and GM 350 turbo's,GM 200 Metric etc.

Like this one:

http://www.transmissionpartsusa.com/TH180_TH200_2004R_ext_housing_bushing_remover_p/300-000jt0160.htm

That looks exactly like the one I have that (I think) was made by Lisle or K-D. The snap on one is a much sturdier looking piece.

[Chryco Psycho]

I doubt I would use it often but I do need one now
 Thanks for the links , I will see if there is asupplier locally , probably look at the universal one as I can see using the larger one more often