What are you doing with your ebody this weekend?

[roadman5312]

After re-wiring the whole car I started trying to diagnose the miss my car has been having.  It all started after the rich spell I went through after finding the regulator putting out 9 psi!! yikes.

Just as I suspected, several of the plugs were fouled... should have quit driving it around.  Anyways, easy fix.  While I was changing the plugs I chunked the 7mm spark plug wires and bought some 8.5mm MSD super conductors and cut them to length and made it look as nice as I could.  NASCAR style zip-ties for wire separators. LOL!

Looks good and the small miss is gone.  Seems to idle much better as well!  Thinking about replacing the mopar ECU and distributor with a MSD that will double spark for even cleaner idle quality with this lopey camshaft.  I don't want an ugly red one though... hmmm wonder if MSD has a black one for 440s... that would be nice and would match my theme.  Not a fan of the red distributors or red/blue a/n fittings everyone always has.

                      Install the MSD box under the battery, out of sight. You can get a black dist. cap.  What we did as I feel the same way.   

[GoodysGotaCuda]

I got a Saturday off from class and managed to get my 26" Champion Hemi conversion radiator in. Not too many things left to install before I can ship the car for paint!

[70chall440]

finally got poly primer shot onto my car.

[ec_co]

finally getting through the final legs of a title. taking it to VIN inspection today - crappy crappy weather .... the main rain storm is supposed to hit right around the time of inspection (and sounds like it might be a doosy). but if I don't do it now, I wait another month and have to start some of the process from scratch    so, sucking it up and getting it done. after this I should be good to go and I can finally get started

[Cudaragtop]

Peeling off the 418 Hockey Sticks off and putting 340 Sticks back on.
418 was like a novelty but I like the 340 sticks better.

[anlauto]

Peeling off the 418 Hockey Sticks off and putting 340 Sticks back on.
418 was like a novelty but I like the 340 sticks better.

Can't you just change the numbers ?

[ec_co]

made it through the mini monsoon OK, lots of 1/4" hail ... at one point in the drive it was a monsoon of hail for a mile.  thankfully nothing bigger 

[spamtank]

Had the front end aligned by someone who actually knew what they were doing. 

He pointed out that I should adjust the slop out of my power steering box.

I took care of that, rotated the tires, greased all the zerk fittings.  And she's good for another year.

Now running and handling better than it ever has.

[70chall440]

Sanding and more sanding..

[BS CUDA]

Dropped mine off at the engine builder to have the oil leak fixed - not enough sealant on the rear oil galley plugs? Picked it up no leak - drove home 30km, parked in my driveway, 10 minutes later puddle underneath again. Guess they get to try again - at least its not me pulling the transmission. Still frustrating though.

[Cudaragtop]

Can't you just change the numbers ?

I bought the 418 Hockey Sticks from Phoenix Graphics to replace the ones from a party that will remain nameless, looked like they were cut out with scissors & too long.
I bought extra 340 call outs from Phoenix Graphics so I could change the numbers if I decided to go back to 340...
Phoenix Graphics were better but still not quite right to me...
So I bought Performance Car Graphics to replace the the ones from Phoenix Graphics...
We'll see.  I hope they are better.
Car is going to be photographed for "Randy's Ring and Pinion" Calendar in a couple weeks so I have to quit procrastinating
https://www.ringpinion.com/

[70chall440]

I bought the 418 Hockey Sticks from Phoenix Graphics to replace the ones from a party that will remain nameless, looked like they were cut out with scissors & too long.
I bought extra 340 call outs from Phoenix Graphics so I could change the numbers if I decided to go back to 340...
Phoenix Graphics were better but still not quite right to me...
So I bought Performance Car Graphics to replace the the ones from Phoenix Graphics...
We'll see.  I hope they are better.
Car is going to be photographed for "Randy's Ring and Pinion" Calendar in a couple weeks so I have to quit procrastinating
https://www.ringpinion.com/

You shouldn't have any lack of stripes to choose from...  I was going to put AAR stripes on my car, but right now I am thinking not to, but we will see how the car looks without them.

[dfrazz]

So I bought Performance Car Graphics to replace the the ones from Phoenix Graphics...
We'll see.  I hope they are better.

I only buy from Performance Car Graphics.  They have been spot on for me every time!   

[shatar4]

I am slowly getting the 505 ready to start up this week. Getting a bunch of little stuff buttoned up.

[GoodysGotaCuda]

Rolled it!