What are you doing with your ebody this weekend?

[GoodysGotaCuda]

And what did it say back to you......

Hurry up and finish


Sent from my iPhone using Tapatalk

[Cudakiller70]

Hurry up and finish


Sent from my iPhone using Tapatalk

mines yelling at me right now, it wants out of the garage, no laptop needed.

[Topcat]

Putting in a replacement distributor since my first one broke the advance spring pins and springs.

Gawd almighty will it be hot in that garage tomorrow.
It's like a sauna in there.

 Supposed to be hitting a 100 degrees. 

[brads70]

Putting in a replacement distributor since my first one broke the advance spring pins and springs.

Gawd almighty will it be hot in that garage tomorrow.
It's like a sauna in there.

 Supposed to be hitting a 100 degrees.

Get at it early in the morning! Great to hear it wasn't something worse!

[734406pk]

Putting in a replacement distributor since my first one broke the advance spring pins and springs.

Gawd almighty will it be hot in that garage tomorrow.
It's like a sauna in there.

 Supposed to be hitting a 100 degrees.

We have been baking here in the north east too! We have a few of these fans and work directly in front of them, it life support!

http://www.homedepot.com/p/Lasko-Pro-Performance-High-Velocity-Pivoting-Blower-Fan-4905/202185788
or this one:

http://www.homedepot.com/p/20-in-High-Velocity-Floor-Fan-SFC1-500B/202757016

[jimynick]

My sons finished putting the new carpet(s) in after we covered most of the floor with Dominion Sure Seal European sound deadening pads. They are 8'X20" and come 10 to a box and I paid $36 Cdn per box and we used 3. They install very easily and roll down easily as well. Then I took the old gal over to Kitchener as Central Meat market had strip loins on for $6.99/lb. Only a 12 pack cooler fits the trunk in these things, so I gassed 'er up and headed home. 

[citron fella]

hooters show July 2nd cruisin orlando


Sent from my iPhone using Tapatalk

[Topcat]

Cancelling on the Saratoga CA show this Saturday.

98 degrees. No thanks !

[Katfish]

Enjoying some driving, got my FiTech installed and car is running great!

[GoodysGotaCuda]

I'll likely get my bumper on and do a little more tuning this weekend. I need to jump in and install a degree wedge on the rear end as well.

[citron fella]

I'll likely get my bumper on and do a little more tuning this weekend. I need to jump in and install a degree wedge on the rear end as well.

awesome cuda with your lil helper that bumper should go on quick drive safe


Sent from my iPhone using Tapatalk

[ed-pv]

Sunday cruise with some friends in the 71 Cuda

https://vimeo.com/229501029

[70chall440]

Finish cutting and buffing my Cuda..

[cordodge]

Getting ready for moparfest, hopefully the weather is nice.

[jim.k]

just got the top of my car from the cowl to the tail panel into epoxy primer. first epoxy primer to go on.  now for more stripping . hope to get the hood and deck lid primered by the end of the weekend.  I got  a long way to go.