What are you doing with your ebody this weekend?

[JayBee]

It won't be me doing the work. I'm really hoping my mechanic will work overtime on this axle bearing this weekend.

[spamtank]

Little bit of detailing and cleaning her up for the Cruising Downtown event next week: http://www.cruisingdowntown.com/.  Should be a lot of fun.  I hope to take a lot of photos. 

[spamtank]

It won't be me doing the work. I'm really hoping my mechanic will work overtime on this axle bearing this weekend.

Oh, that's a bummer.     How's the bearing bore in the axle housing?

I hope you get that taken care of. 

[JayBee]

How's the bearing bore in the axle housing?

It's about 1/16 of an inch oversize.  He has a spare 8 3/4 housing that we'll be using. Little did I know what was going on when I drove back from Columbus to Canada - lucky to get home or what.

[DAYLEY/CHALLENGER]

Always thought the dash panel lights were on the dim side.........So I installed a lite bar.........It has a little LED light in the mount and I put one on each end to add more light.  Ths light only emits from the bar kind of like you need to look at a thermometer......one way.......so I angled the output towards the instrument panel.  I used pressure sensitive velcro to attach in 4 places. I will wait until tonight to see the real effects but in the garage, I turned the lights on and actually saw illumination.......in the daylight.   

[GoodysGotaCuda]

It won't be me doing the work. I'm really hoping my mechanic will work overtime on this axle bearing this weekend.

Yikes! I need to go through and replace my rear axle bearings. Pretty sure they are originals 

Guess I'll "have" to acquire a press 

[DAYLEY/CHALLENGER]

Well I checked my panel lights...............You can see all the guages and the engine isn't even running.......I can drive at night now...............

[joelson6]

this weekend everything's locked up in hope of surviving this hurricane 

[HEMROID]

Great idea Dave. 

I'd love to do that to mine, although, I think I just need to get any light working first...

I drove my Challenger about 100km today and put fuel in it. That's it for me.

[quapman]

Well I checked my panel lights...............You can see all the guages and the engine isn't even running.......I can drive at night now...............

I like the additional LED light bars, but your original lights were dim because you have the factory lights for a STANDARD dash.

[GranCuda1970]

I like the additional LED light bars, but your original lights were dim because you have the factory lights for a STANDARD dash.

 They still sell most of the bulbs for those dash lights at Shucks/O'reilly auto parts stores.

[DAYLEY/CHALLENGER]

I like the additional LED light bars, but your original lights were dim because you have the factory lights for a STANDARD dash.

Hey Steve.......I thought I was supposed to have a 4 light bar....................Always a supprise with these cars.....................

[spamtank]

Hey Steve.......I thought I was supposed to have a 4 light bar....................Always a supprise with these cars.....................

Here's my stock Rallye dashboard instrument lighting.  They are cranked up the whole way, engine is shut off, and only the parking lights are on.  Otherwise, I find these to be more than adequate even at dusk.  And I don't think I'd change it.

I'd be curious to see how your LED bar illuminates the gauges.

[Matt70]

Here's my stock Rallye dashboard instrument lighting.  They are cranked up the whole way, engine is shut off, and only the parking lights are on.  Otherwise, I find these to be more than adequate even at dusk.  And I don't think I'd change it.

I'd be curious to see how your LED bar illuminates the gauges.

Wow! that is way brighter than mine.... guess I know what I'm doing next weekend

[tommyg29]

heres my stock setup. barely bright enough, but....I have white face gauges