70 Booster and master picture wanted

[Tropicalcats]

Looking for a couple good pictures of a original 70 Challenger power booster and master cylinder mounted in a car.

 Thanks

[Alaskan_TA]

.

[Moparal]

Barry, that big hole with the rubber tube coming out of it, is that for a foot washer pump? What goes there if not? My car had a variable , but that hole is there to

[Alaskan_TA]

Yes, this is a manual washer car.

If I remember right, a power washer car would just have a plug in that hole? 

[Tropicalcats]

Thanks Barry

[Alaskan_TA]

My pleasure TC, did it tell you what you needed to know?

The master cylinder itself would have been black also when new, the whole assembly was painted at the same time, all together. (for 1970 model year cars)

[Tropicalcats]

It sure did. just wanted to see how the wire was wrapped through. Wish I had the original Master.

[Moparal]

Give me the part number for the master. I have a master in a drawer in the shop. I will see if it is the one you need. If so, you can have it.

[PlumCrazy]

It sure did. just wanted to see how the wire was wrapped through. Wish I had the original Master.

Non T/A - AAR booster

[Tropicalcats]

Give me the part number for the master. I have a master in a drawer in the shop. I will see if it is the one you need. If so, you can have it.

 Alan I sent you a PM

[Moparal]

I will check it out now for you. I am going to try and lift the dana into my dually right now, so I will be in the shop. If it is the one you need, it's not forsale, you can have it.