Heads?

[Dusty1]

Can anyone tell me where I can find info on these heads? 3769974   Thanks!

[Moparal]

a 3769975 head is a 83.1 cc head from a 440 or 400 from years 74-75.  You sure it's a 974 ?  Or 975

[Dusty1]

It says 360 on it, but its in my friends "67 Cuda. He thinks its a '75 head, but we couldn't find that #

[Moparal]

Sorry Dusty1, I was looking at bb only, so I am not sure now

[Dusty1]

Thanks Al! We're just curious.

[nivvy]

Casting Number Engine CID Year Intake Exhaust
2465315 273 1964-65 1.78 1.50
2532080 273 1964-65 1.78 1.50
2536178 273 1966 1.78 1.50
2658234 273 1966 1.78 1.50
2658920 273/318 1966-67 1.78 1.50
2843675 273/318 1968-74 1.78 1.50
2268341 318 1962-67 1.84 1.56
2658234 318 1967 1.78 1.50
2843675 318 1968-74 1.78 1.50
3769973 318 1975-83 1.78 1.50
4027163 318 1977-86 1.78 1.50
4027593 318 1977-84 1.78 1.50
4323302 318 Fast Burn 1985-86 1.78 1.50
4323345 318 Police 1983-86 1.78 1.50
2531894 340 1968-70 2.02 1.60
3418915 340TA 1970 2.02 1.60
3418915 340 1971-72 1.88 1.60
3671587 340 1973 1.88 1.60
3418915 360 1970-72 1.88 1.60
3671587 360 1973-74 1.88 1.60


3769974 360 1975-76 1.88 1.60

3671587 360 1976 1.88 1.60
4027569 360 1977-86 1.88 1.60

[Moparal]

Casting Number Engine CID Year Intake Exhaust
2465315 273 1964-65 1.78 1.50
2532080 273 1964-65 1.78 1.50
2536178 273 1966 1.78 1.50
2658234 273 1966 1.78 1.50
2658920 273/318 1966-67 1.78 1.50
2843675 273/318 1968-74 1.78 1.50
2268341 318 1962-67 1.84 1.56
2658234 318 1967 1.78 1.50
2843675 318 1968-74 1.78 1.50
3769973 318 1975-83 1.78 1.50
4027163 318 1977-86 1.78 1.50
4027593 318 1977-84 1.78 1.50
4323302 318 Fast Burn 1985-86 1.78 1.50
4323345 318 Police 1983-86 1.78 1.50
2531894 340 1968-70 2.02 1.60
3418915 340TA 1970 2.02 1.60
3418915 340 1971-72 1.88 1.60
3671587 340 1973 1.88 1.60
3418915 360 1970-72 1.88 1.60
3671587 360 1973-74 1.88 1.60


3769974 360 1975-76 1.88 1.60

3671587 360 1976 1.88 1.60
4027569 360 1977-86 1.88 1.60

Mr guru pulls through again

[Dusty1]

Thanks Stroker! Just what I needed!

[Chryco Psycho]

they are a nothing head .. if you can find a set of the later 308 castings you will be far better off

[nivvy]

Mr guru pulls through again

CP is the guru ........  I just like breaking stuff till I figure it out .... 

[Moparal]

CP is the guru ........  I just like breaking stuff till I figure it out .... 

I hold CP  on a level all to his own   There's actually quite a few people here that when all together can build a car on this site better then the assembly line ever thought about doing. And it would go and last indefinatly.

[Dusty1]

Thanks CP! Thats what we needed to know.

[Chryco Psycho]

 
 I don`t think I am that good , I just have no life I have been doing this forever so I have found stuff that works & avoid stuff that doesn`t , I just learned another expensive lesson on EFI fuel pumps 

[Dusty1]

For us who know nothing, you save us time & money