340 6 pack vacuum tube

[ohio cuda]

Does anyone have a picture of the correct hose route for all the hoses? I'm thinking I've got something wrong with my layout.

[Chryco Psycho]

the dist hose hooks to the nipple from the metering block , the secondary carbs connect to the other nipple right near it

[Moparal]

Choke pull off hooks to the bottom front of the center carb. The top vaccum port on the side is for the T splitter to the outboard carbs. The vaccum port under the top one is for the vaccum advance, just like what cp said. top right for outboard carbs, bottom right for vac advance. bottom front for choke pull off

[hemiken]

I hope this can help in any way...............

[Moparal]

Kenny, that engine is installed backwards, he will have trouble with that. The distributor is in the back on your pics

[hemiken]

Hey Alan,

He wants 340 pictures, not 440 pictures buddy, i think you are still emotional stay cool old mate.

[Moparal]

Hey Alan,

He wants 340 pictures, not 440 pictures buddy, i think you are still emotional stay cool old mate.

   What's a 340? Baby hemi!  hemi distributor up in fron on 426. 

[hemiken]

  What's a 340? Baby hemi!  hemi distributor up in fron on 426. 

You kill me sometimes

[Moparal]

Look in my mirror, you see me yeah it's you.....Hey you have gray hair now

[ohio cuda]

Thanks guys, I'll confirm with a picture later today. Are the vaccum levels different at each of these ports?

[Chryco Psycho]

technically they are both ported vacuum  & work the same But they don`t , hooked up backwards the secondaries don`t work properly as there is a bleed in the secondary circuit to slow the opening , the dist advance port has no bleed

[ohio cuda]

Thanks Neil and everyone. This is correct?

[Chryco Psycho]

Yes