Author Topic: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift (Read 13587 times)

scottdidit · « **Reply #15 on:** August 22, 2008 - 05:37:51 AM »

hey all... Note from ididit tech guy
Please Please Please dont remove the lock cylinder to change... it is not even remotely the same as Chrysler or Gm.
Make sure you ask plenty of questions about the columns to know the differences before you buy.
The brushed steel column is mild steel and yes it will rust.
yes saginaw steering gear made columns for both GM and Chrysler.. the tilt columns were almost identical. except for the lock key set.

CHUCKS71 · « **Reply #16 on:** August 22, 2008 - 05:02:57 PM »

Thanks Scott!

360 'CUDA · « **Reply #17 on:** August 24, 2008 - 05:36:14 PM »

It seems to me it would be almost as easy to use a column out of a Camaro or firebird. The ones from cars in the 1980s are pretty slick looking and cheap. You would have to mess around with the turnsignal wiring and shim up the firewall mount but I think saving $900 would be worth it...

ShelbyDogg · « **Reply #18 on:** August 25, 2008 - 10:03:59 PM »

I thought most of you guys saw my tilt column in my Challenger. It is a saginaw column from a 78 Cordoba, with a floor mounted shifter. All of the connectors had an adapter harness that converted the wiring to my Mopar harness and it plugged right in. All the turn signals, ignition functions and even the flashers worked without a rewire. AND it used a Chrysler upside down key that I keyed my doors to. I had to make an adapter shaft at the bottom to attach it to my coupler shaft.

HP2 · « **Reply #19 on:** August 26, 2008 - 06:48:46 AM »

Quote from: shelbydogg on August 25, 2008 - 10:03:59 PM

I had to make an adapter shaft at the bottom to attach it to my coupler shaft.

This is what stops a lot of attempts at using this or GM specific columns. A lot of people out there want a true bolt in, no fab necessary item and are willing to pay extra for that convienance.

thedodgeboys · « **Reply #20 on:** August 26, 2008 - 07:34:15 AM »

shelbydogg

floor to dash no mods bolts right in?

I forgot about those colums thanks for the tip.

ShelbyDogg · « **Reply #21 on:** August 26, 2008 - 08:45:11 AM »

Quote from: HP2 on August 26, 2008 - 06:48:46 AM

This is what stops a lot of attempts at using this or GM specific columns. A lot of people out there want a true bolt in, no fab necessary item and are willing to pay extra for that convienance.

Then their "true bolt in, will get them a GM key for their Chrysler car.

Quote from: thedodgeboys on August 26, 2008 - 07:34:15 AM

shelbydogg

floor to dash no mods bolts right in?

The floor plate with the 3 holes had one hole in a different spot, so I had to drill a hole a put a washer and nut behind it. The dash mount was a little different so I welded a flat plate to the top of it to bolt to the 2 dash support studs. To adapt the shaft, by the coupler, Both shafts were cut to length, slipped into a tube, then welded at both ends. very simple

I paid about $20 for the whole column at the junk yard.

Rob

gkring · « **Reply #22 on:** September 07, 2008 - 09:27:27 PM »

They don't show it on their website yet, but my latest Mopar mag has an ad for flaming river Ebody tilt with Mopar keys.

PlumCrazyChris · « **Reply #23 on:** December 20, 2008 - 01:34:45 AM »

Quote from: shelbydogg on August 25, 2008 - 10:03:59 PM

I thought most of you guys saw my tilt column in my Challenger. It is a saginaw column from a 78 Cordoba, with a floor mounted shifter. All of the connectors had an adapter harness that converted the wiring to my Mopar harness and it plugged right in. All the turn signals, ignition functions and even the flashers worked without a rewire. AND it used a Chrysler upside down key that I keyed my doors to. I had to make an adapter shaft at the bottom to attach it to my coupler shaft.

Dog, is there anyway to put a collapsable column and Challenger steering wheel on it, or will it stick out to far?

Thanks,
Chris

ShelbyDogg · « **Reply #24 on:** December 20, 2008 - 01:48:15 AM »

Quote from: PlumCrazyChris on December 20, 2008 - 01:34:45 AM

Dog, is there anyway to put a collapsable column and Challenger steering wheel on it, or will it stick out to far?

The tilt column is a smaller diameter than a standard e-body column. About 1" smaller. Tilt columns also take a different wheel adapter than a non-tilt, so I don't think you could bolt it on at all.

Rob

PlumCrazyChris · « **Reply #25 on:** December 20, 2008 - 03:15:05 AM »

Bummer, it looks good though. I love the Cordobas and diplomat cop cars for parts. They are a treasure trove if you don't have to be original.

Chris

quapman · « **Reply #26 on:** December 23, 2008 - 07:37:07 PM »

The ididit unit is nice, but way too mucho deniro for me!

All the 70's Mopar tilt coulmns were GM made (Delco division?). I have a couple, but cannot access them (700 miles away in storage at a friend's). I recall everything was different and the switches had special wiring adapters (like what you get from Crutchfield when you buy an aftermarket stereo). Mine all had normal Mopar keys, but I don't recall the orientation.

71/72 Chargers had tilt-columns as an option, but only available as automatic on the column cars!

Steve

ShelbyDogg · « **Reply #27 on:** June 28, 2009 - 09:13:46 PM »

I found another column for my Cuda by searching Craigslist all over the nation and e-mailing sellers that were selling Cordoba parts. Got it for $50 without the steering wheel and key assembly, from a guy in Windsor, Canada, who listed in Detroit, MI. The keyswitch is available at Oreilly's for $13.99. The wiring adapters were there. These allow the wiring to the ignition switch and turn signals to be plugged right into the E-body wiring harness. Here they are marked in RED. They are out there, you just have to look.

wally426ci · « **Reply #28 on:** July 16, 2009 - 01:32:07 PM »

Awesome find!

the_engineers · « **Reply #29 on:** July 16, 2009 - 02:10:34 PM »

Stupid question:
How do you search Craigslist "all"?

Author Topic: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift (Read 13587 times)

scottdidit

Re: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift

CHUCKS71

Re: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift

360 'CUDA

Re: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift

ShelbyDogg

Re: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift

HP2

Re: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift

thedodgeboys

Re: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift

ShelbyDogg

Re: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift

gkring

Re: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift

PlumCrazyChris

Re: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift

ShelbyDogg

Re: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift

PlumCrazyChris

Re: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift

quapman

Re: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift

ShelbyDogg

Re: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift

wally426ci

Re: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift

the_engineers

Re: ididit�s 1970-74 Cuda/Challenger Tilt Column Floor Shift