Any Aluminum Radiator you guys recomend?

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: 1 2 3 [4]

    Author Topic: Any Aluminum Radiator you guys recomend?  (Read 12843 times)

    Offline moparmaniac59

    • Resident
    • *****
    • Posts: 3772
    • Drive it like ya stole it!
    Re: Any Aluminum Radiator you guys recomend?
    « Reply #45 on: July 08, 2008 - 05:10:29 PM »
    I put a post in this section about Smith Racing Radiators. I had asked if anyone was familiar with them, but no response. I guess they are fairly new to the market. :dunno: Due to the cost of copper, it would have cost me 800 bucks to recore my factory radiator.  :scared:I couldn't see paying that much, so I ordered a direct fit big block 26" down flow aluminum radiator (4-core with 1 1/4" tubing) from Smith Radiators and it arrived today. I can say without a doubt that it is a good quality piece and fit very well (and looks good too). I had to do just a little adjustment for interference with my washer fluid reservoir bottle. The radiator has mounting brackets that match to the factory location and tabs for drilling/mounting a fan shroud (my factory fan shroud fit perfect). The company is in Cambridge City, Indiana. The radiator was about 600 bucks, but well worth it. It is fitted with a drain plug, transmisson cooler and as mentioned, mounting brackets. You can check out the site at www.smithsradiator.com. Good product. I recommend them!! :2thumbs: If there is any interest I can take a pic and post it of the installed radiator.  :2thumbs:

                                                                        Matt B.
    Logged
    Matt


    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: Any Aluminum Radiator you guys recomend?
    « Reply #46 on: July 08, 2008 - 05:28:19 PM »
    Hey Matt,


       I'll just check it out in person in 2 days!!    :jumping:

    I'm glad it is working for you.   :2thumbs:




       Mike
    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

    Offline matt63

    • Sr. Member
    • ****
    • Posts: 1855
    Re: Any Aluminum Radiator you guys recomend?
    « Reply #47 on: July 08, 2008 - 10:15:23 PM »
    Quote from: widing'cuda on July 07, 2008 - 03:01:10 PM
    Cool. Do you have any picture of you setup? Was it hard to install?
    Here is a couple of pics
    Logged
    Matt in Edmonton

    '68 Valiant
    '73 Cuda 340 4 speed (408) SOLD

    Offline 71chally416

    • Resident
    • *****
    • Posts: 3170
      • The Streetwalker
    Re: Any Aluminum Radiator you guys recomend?
    « Reply #48 on: July 08, 2008 - 10:19:49 PM »
    That's cool as ****l!
    Logged
    Once we had Ronald Reagan, Bob Hope & Johnny Cash. Now we have Obama, No Hope and No Cash!

    Offline widing'cuda

    • Full Member
    • ***
    • Posts: 586
    • 70 'cuda383 - BS23N0E
      • w i d i n g ' c u d a
    Re: Any Aluminum Radiator you guys recomend?
    « Reply #49 on: July 10, 2008 - 03:55:13 PM »
    Quote from: matt63 on July 08, 2008 - 10:15:23 PM
    Here is a couple of pics

    Now that's nice  :bigsmile: Do you have 22" og 26" opening in the radiator suport? P/N 52180R Right?
    Logged

    - Jørgen - Norwegian Mopar fanatic

    1970 Plymouth 'Cuda 383 A833 8-3/4 3.23 suregrip
    http://cuda.widing.biz/

    Offline matt63

    • Sr. Member
    • ****
    • Posts: 1855
    Re: Any Aluminum Radiator you guys recomend?
    « Reply #50 on: July 10, 2008 - 09:51:44 PM »
    Quote from: widing'cuda on July 10, 2008 - 03:55:13 PM
    Now that's nice  :bigsmile: Do you have 22" og 26" opening in the radiator suport? P/N 52180R Right?
    It's a 22 inch opening.  I think the p/n is correct as the 26 c/w 2-10" fans.  I would call Flexalite on a recommendation.  I doubt the 26" would fit without relocating the battery and some cutting.
    Logged
    Matt in Edmonton

    '68 Valiant
    '73 Cuda 340 4 speed (408) SOLD

    Offline KellysCuda aircard

    • Its good to be blown
    • Full Member
    • ***
    • Posts: 868
    Re: Any Aluminum Radiator you guys recomend?
    « Reply #51 on: July 11, 2008 - 10:59:16 AM »
    Quote from: StRoKer on June 17, 2008 - 01:59:25 PM
    Be Cool  :bigsmile: ............. Less exspensive Griffin.........  each one is only good to so much HP ...........  :2thumbs:
    With out a doubt, hands down the only rad that is even a consideration. I used to over heat at an idle, I tried other aluminum rad packages and fan combos, but when the smoke cleared the only one that worked and come with a guaranteed to keep my car cool is BE COOL. It was pricey but well worth the cash, they are custom made for the E body and worth every penny. Dont be stingy with the cash when it comes down to keeping your cool.   :2thumbs:
    Logged

    Offline widing'cuda

    • Full Member
    • ***
    • Posts: 586
    • 70 'cuda383 - BS23N0E
      • w i d i n g ' c u d a
    Re: Any Aluminum Radiator you guys recomend?
    « Reply #52 on: July 11, 2008 - 11:22:20 AM »
    Quote from: KellysCuda aircard on July 11, 2008 - 10:59:16 AM
    With out a doubt, hands down the only rad that is even a consideration. I used to over heat at an idle, I tried other aluminum rad packages and fan combos, but when the smoke cleared the only one that worked and come with a guaranteed to keep my car cool is BE COOL. It was pricey but well worth the cash, they are custom made for the E body and worth every penny. Dont be stingy with the cash when it comes down to keeping your cool.   :2thumbs:

    What's the p/n for the becool setup then?
    Logged

    - Jørgen - Norwegian Mopar fanatic

    1970 Plymouth 'Cuda 383 A833 8-3/4 3.23 suregrip
    http://cuda.widing.biz/

    Offline widing'cuda

    • Full Member
    • ***
    • Posts: 586
    • 70 'cuda383 - BS23N0E
      • w i d i n g ' c u d a
    Re: Any Aluminum Radiator you guys recomend?
    « Reply #53 on: July 11, 2008 - 11:41:56 AM »
    Quote from: matt63 on July 10, 2008 - 09:51:44 PM
    It's a 22 inch opening.  I think the p/n is correct as the 26 c/w 2-10" fans.  I would call Flexalite on a recommendation.  I doubt the 26" would fit without relocating the battery and some cutting.

    I have mersured up the 26" core rad and it will not fit. So I Guess I have to look at det 22" core rad insted. Much modes you had to do to install it?
    Logged

    - Jørgen - Norwegian Mopar fanatic

    1970 Plymouth 'Cuda 383 A833 8-3/4 3.23 suregrip
    http://cuda.widing.biz/

    Offline matt63

    • Sr. Member
    • ****
    • Posts: 1855
    Re: Any Aluminum Radiator you guys recomend?
    « Reply #54 on: July 11, 2008 - 12:21:34 PM »
    Quote from: widing'cuda on July 11, 2008 - 11:41:56 AM
    I have mersured up the 26" core rad and it will not fit. So I Guess I have to look at det 22" core rad insted. Much modes you had to do to install it?
    Easy install.  You might need to find an upper rad hose that fits or go to a flex type hose.  I ended up increasing my alternator size to run the fan and keep 12v at idle which was a bit of a job.
    Logged
    Matt in Edmonton

    '68 Valiant
    '73 Cuda 340 4 speed (408) SOLD

    Offline widing'cuda

    • Full Member
    • ***
    • Posts: 586
    • 70 'cuda383 - BS23N0E
      • w i d i n g ' c u d a
    Re: Any Aluminum Radiator you guys recomend?
    « Reply #55 on: July 11, 2008 - 01:07:40 PM »
    Quote from: matt63 on July 11, 2008 - 12:21:34 PM
    Easy install.  You might need to find an upper rad hose that fits or go to a flex type hose.  I ended up increasing my alternator size to run the fan and keep 12v at idle which was a bit of a job.

    Ok, cool. I'm hoping the uper hose will fit as my has stock pas. side inlet as teh new rad has. But but that should be a problem anyway.
    I have 92 amp Powermaster alternator allready and a large battery, so that shouldn't be a problem.
    Logged

    - Jørgen - Norwegian Mopar fanatic

    1970 Plymouth 'Cuda 383 A833 8-3/4 3.23 suregrip
    http://cuda.widing.biz/

    Offline KellysCuda aircard

    • Its good to be blown
    • Full Member
    • ***
    • Posts: 868
    Re: Any Aluminum Radiator you guys recomend?
    « Reply #56 on: July 11, 2008 - 02:13:14 PM »
    Quote from: widing'cuda on July 11, 2008 - 11:22:20 AM
    What's the p/n for the becool setup then?

    Just phone them, they will set you up, they are great to talk to, and I believe they offer a money back guarantee. I bought the one for a challenger by mistake, they sent me the correct one in exchange and I didnt even buy it directly from them.
    Logged

    Offline matt63

    • Sr. Member
    • ****
    • Posts: 1855
    Re: Any Aluminum Radiator you guys recomend?
    « Reply #57 on: July 11, 2008 - 03:25:35 PM »
    For a big block I might be tempted to pay the big bucks and get the BeCool.
    Logged
    Matt in Edmonton

    '68 Valiant
    '73 Cuda 340 4 speed (408) SOLD

    Offline widing'cuda

    • Full Member
    • ***
    • Posts: 586
    • 70 'cuda383 - BS23N0E
      • w i d i n g ' c u d a
    Re: Any Aluminum Radiator you guys recomend?
    « Reply #58 on: July 11, 2008 - 04:38:16 PM »
    I see that one he becool application the terminal switch is to be installed in one of the heads and not in the radiator. Why?
    Logged

    - Jørgen - Norwegian Mopar fanatic

    1970 Plymouth 'Cuda 383 A833 8-3/4 3.23 suregrip
    http://cuda.widing.biz/

    Offline Ornamental

    • Full Member
    • ***
    • Posts: 918
    • Oslo, Norway
    Re: Any Aluminum Radiator you guys recomend?
    « Reply #59 on: February 14, 2009 - 01:23:36 PM »
    Quote from: IMNCARN82 on June 19, 2008 - 01:21:48 PM
    I tried a jegs alum.200.00 radiator.Need to go with a BC to fit with the alterKation.700.00!! :banghead: The Jegs twin 12" fans for 189.00 are awsome!They move more than enough air for my 340. :dunno:    More than the factory IMO.

    What?!?!
    NEED to go with a BC due to Alterktion?
    Not that I don't believe you, I do, but why is it so?

    The reason I'm asking is that there will be a Alterktion in my Challenger this year (Or else widing'cuda will slap me like a b!tch, and quite rightly so. I've had it lying around far too long now).

    Which BC and fans did you end up with?

    Logged
    Panther Pink '72 Challenger Rallye.
    Grey '70 Challenger R/T

    -There are two kinds of pedestrians: The quick and the dead.

    ***Per Arne***
    Pages: 1 2 3 [4]
    « previous next »