Author Topic: FC7 metal flake or not?  (Read 6805 times)

Offline bb71challenger

  • Sr. Resident
  • ******
  • Posts: 6549
FC7 metal flake or not?
« on: June 18, 2008 - 10:32:35 PM »
I had a guy tell me today that plum crazy was not metalic paint. I have a project car and although it was original FC7, all the exposed parts are pretty faded but I could swear that I can see metal flake in the paint. I saw a couple of plum cars at a show this last weekend and they seemed to be the right shade and were metalic. What say you paint gurus? This guy swears up and down that the paint is "alkaloid"? WTF is that? He says it is a flat color like FE5, FJ5, Fj6, etc. Is he right or full-o-bull?
1971 Challenger (OO==== ====OO) getting close!
1970 Challenger (OO########OO) long ways off
*Brett*




Alaskan_TA

  • Guest
Re: FC7 metal flake or not?
« Reply #1 on: June 18, 2008 - 10:41:36 PM »
1970 paint chip chart at this link;

http://www.hamtramck-historical.com/paintChipCharts/_1970PaintChipCharts-01.shtml?load_img=1

It says "met." for metallic.  :wave:

Offline bb71challenger

  • Sr. Resident
  • ******
  • Posts: 6549
Re: FC7 metal flake or not?
« Reply #2 on: June 18, 2008 - 10:43:21 PM »
Barry, you are da man! Not only did you answer my question but you also showed me the correct spelling of metallic lol. I spelled it that way to start but it didnt look right to me so I dropped an L  :drunk:
1971 Challenger (OO==== ====OO) getting close!
1970 Challenger (OO########OO) long ways off
*Brett*

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: FC7 metal flake or not?
« Reply #3 on: June 19, 2008 - 02:50:14 AM »
I agree FC7 was metallic , adding a bit more & blue metallic will help a lot too

Challenger - You`ll wish You Hadn`t

Offline hemiken

  • Sr. Resident
  • ******
  • Posts: 8785
  • Hemi-fied Mopar in Australia
Re: FC7 metal flake or not?
« Reply #4 on: June 19, 2008 - 06:24:37 AM »
I had a guy tell me today that plum crazy was not metalic paint. I have a project car and although it was original FC7, all the exposed parts are pretty faded but I could swear that I can see metal flake in the paint. I saw a couple of plum cars at a show this last weekend and they seemed to be the right shade and were metalic. What say you paint gurus? This guy swears up and down that the paint is "alkaloid"? WTF is that? He says it is a flat color like FE5, FJ5, Fj6, etc. Is he right or full-o-bull?

You had better tell that guy he is full-o-bull as their are plenty of metallic paints for 70 and Plum Crazy/In-Violet are both in this catagory. :2thumbs:
1970 Barracuda   (O^--^===|===^--^O)
1971 Barracuda   (O O {]{]{]|[}[}[} O O)
1970 Challenger  (O O [======R/T=] O O)
1971 Challenger  (O O ===== ===== O O)
I pay homage to the best Mopars ever built.

Offline Slotts

  • Sr. Member
  • ****
  • Posts: 1893
Re: FC7 metal flake or not?
« Reply #5 on: June 19, 2008 - 06:46:25 AM »
Before showing this guy the proof, see if you can take some of his money. :grinyes:

Ask him about hemi orange, too. ;)

Slotts

Offline RusTy/SE

  • Sr. Resident
  • ******
  • Posts: 5456
  • Just havin' fun
Re: FC7 metal flake or not?
« Reply #6 on: January 19, 2009 - 10:30:50 PM »
The folks working my Challenger called me today saying they had my PPG Plum Crazy paint on hand. I have no first hand knowledge of how to read the codes but the info on the label doesn't seem like what I was hoping for. They already have tried to tell me that FC7 in 1970 was not metallic and I shot that false fact down so now i'm a bit :sly:  Here is the info from the label:

DBC 5463 SC

AY112WHP

Dark Plum Pearl Coat

What should the label read?

They say that once the clear coat is applied the color will lighten up some but seeing the word 'Pearl' does not seem kosher. I was shown some on a mixing stick and it just seemed too "candy" looking to me. I'm not looking for anything fancy, just somewhat close to the original shade. These folks mean well; they just haven't dealt with FC7 before.

Am I being too picky? Not picky enough? I'm bit out of my league here so what say any of you who've been down this path?

 :1zhelp:
« Last Edit: January 19, 2009 - 10:33:49 PM by onefornow »
Russ
2001 Durango     1B4HS
1970 Challenger  JS29U
Restoration thread: http://www.cuda-challenger.com/cc/index.php?topic=27173.0
Member since December 13, 2002

Offline bb71challenger

  • Sr. Resident
  • ******
  • Posts: 6549
Re: FC7 metal flake or not?
« Reply #7 on: January 19, 2009 - 10:50:58 PM »
I am like you, I want the original hue no matter what it takes. I am lucky that the guy doing my car is using RM and they seem to have lots of updated codes. I was sweating if Butterscotch could be had in that system but its there. It is definitely metallic and I would not settle for less than what you want. My worst nightmare is to drive about a year in ignorant bliss only to drive to a big show and find out my color is not original. I have left some of the original color in a couple of places just for the sake of comparison. As popular as Plum is I do not see how it would be a problem to get it right. Good luck and let us know how it goes.
1971 Challenger (OO==== ====OO) getting close!
1970 Challenger (OO########OO) long ways off
*Brett*

Offline 72hemi

  • Resident
  • *****
  • Posts: 4812
  • MEMBER SINCE JANUARY 2006
Re: FC7 metal flake or not?
« Reply #8 on: January 19, 2009 - 10:53:59 PM »
The folks working my Challenger called me today saying they had my PPG Plum Crazy paint on hand. I have no first hand knowledge of how to read the codes but the info on the label doesn't seem like what I was hoping for. They already have tried to tell me that FC7 in 1970 was not metallic and I shot that false fact down so now i'm a bit :sly:  Here is the info from the label:

DBC 5463 SC

AY112WHP

Dark Plum Pearl Coat

What should the label read?

They say that once the clear coat is applied the color will lighten up some but seeing the word 'Pearl' does not seem kosher. I was shown some on a mixing stick and it just seemed too "candy" looking to me. I'm not looking for anything fancy, just somewhat close to the original shade. These folks mean well; they just haven't dealt with FC7 before.

Am I being too picky? Not picky enough? I'm bit out of my league here so what say any of you who've been down this path?

 :1zhelp:

I wonder if they have the purple on the new Charger.
1972 Dodge Challenger 340 6 Pack 4-speed
1996 Dodge Viper GTS Coupe

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: FC7 metal flake or not?
« Reply #9 on: January 20, 2009 - 01:39:10 AM »
Russ use the mix I sent you

Challenger - You`ll wish You Hadn`t

Offline farmboy70

  • Sr. Member
  • ****
  • Posts: 1636
Re: FC7 metal flake or not?
« Reply #10 on: January 20, 2009 - 07:29:21 AM »
He is giving you the code for a modern color using Pearl. This is not the original plum crazy.
If you need a mix formula let me know. I have posted a mix for this here before, you may find it in a search.
Dave
« Last Edit: January 20, 2009 - 02:05:53 PM by farmboy70 »

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: FC7 metal flake or not?
« Reply #11 on: January 20, 2009 - 11:25:17 AM »
Well compared to the original color on my car it is virtually Identical whiule most cars painted PC are way too light in color

Challenger - You`ll wish You Hadn`t

Offline farmboy70

  • Sr. Member
  • ****
  • Posts: 1636
Re: FC7 metal flake or not?
« Reply #12 on: January 20, 2009 - 01:30:52 PM »
FC7
2210 PPG
 DMD 624 VIOLET    135.5
DMD1687  MED ALIMINUM    114.4
DMD614   BLUE     28.0
DMD1686 FINE ALUMINUM      14.1
DMD 622    RED       14.1
DX 685   FLATTENER      9.4
DBX1689   CLEAR            186.8





5463 PPG  DARK PLUM PEARL
DMD649     CLEAR        164.5
DMD1693     GREEN     63.3
DMD1605      MAGENTA       40.5
DMD 1683      BLACK          21.5
PRL90           RED PEARL      19.0
DMD1606      MAROON         10.2
DMD646  WEAK WHITE       2.3
PRL88      ORANGE PEARL    1.8
DBX1689   CLEAR              189.9

Offline HP2

  • Resident
  • *****
  • Posts: 4478
Re: FC7 metal flake or not?
« Reply #13 on: January 20, 2009 - 01:51:55 PM »
Hmmm, I wonder if could get a plum crazy mix with red instead of blue. IMO plum crazy the color is more of a grape color because of the blue. Plum purple should be more red than blue.

Offline RusTy/SE

  • Sr. Resident
  • ******
  • Posts: 5456
  • Just havin' fun
Re: FC7 metal flake or not?
« Reply #14 on: January 22, 2009 - 07:33:17 PM »
Dave, the mix both you and Neil posted use the identical components. That proper formula has been forwarded to the shop so that their paint supplier can mix a proper batch  :ylsuper:

Br-oooo-ther when I saw 'Pearl' on the label, the needle-skidding-across-a-record sound bite would have been too accurate :scared:

Thanks for preserving my sanity a bit longer :cheers: :cheers:

Russ

Russ
2001 Durango     1B4HS
1970 Challenger  JS29U
Restoration thread: http://www.cuda-challenger.com/cc/index.php?topic=27173.0
Member since December 13, 2002