Need a pic of a 70-71 Hemi power steering hose (Federal pump)

[Topcat]

All I need is a pic of one (OEM dimensions) showing length; and a few good pictures of each end of the curved steel lines.

There's a place near me that can make one for me once I have all the details.   

[hemiken]

Hi TC,

I hope this helps some

[Topcat]

Thanks Kenny  whoever owns it if they have a side shot.

[Bullitt-]

This what you need?
http://www.partsamerica.com/productdetail.aspx?MfrCode=PWR&MfrPartNumber=70337&PartType=18&PTSet=A

[Topcat]

Thanks Bullit. I'm very surprised that it's available.  He said it's for R code.  Part Number: 70337

[Topcat]

After a little more research, I'm coming to the conclusion that the guy on the phone gave me a "YES" it fits everything in the world" answer.
The Hemi has a special 90 degree fitting on the power steering pump. The applications say it fits the following:
This product fits the following vehicles:
 
          No "R" code listed.
 1970 PLYMOUTH BARRACUDA     
 L6 3.7 Liter Carbureted - 225 CID VIN C 
 L6 3.7 Liter Carbureted - 225 CID VIN C 
 
 V8 6.3 Liter Carbureted - 383 CID VIN L 
 V8 6.3 Liter Carbureted - 383 CID VIN L 
 
 V8 6.3 Liter Carbureted - 383 CID VIN N 
 V8 6.3 Liter Carbureted - 383 CID VIN N 
 
 L6 3.7 Liter Carbureted - 225 CID VIN E 
 L6 3.7 Liter Carbureted - 225 CID VIN E 
 
 1971 PLYMOUTH BARRACUDA     
 L6 3.2 Liter Carbureted - 198 CID VIN B 
 V8 6.3 Liter Carbureted - 383 CID VIN N 
 L6 3.7 Liter Carbureted - 225 CID VIN C 
 V8 6.3 Liter Carbureted - 383 CID VIN L 
 
 V8 6.3 Liter Carbureted - 383 CID VIN L 
 V8 6.3 Liter Carbureted - 383 CID VIN N 
 1972 PLYMOUTH BARRACUDA     
 L6 3.7 Liter Carbureted - 225 CID VIN C 
 
 
I think then I still need a good picture now.

[Topcat]

So I went Deep on finding out more about the differences. I called Kragen and asked to be put in contact with tech support at Powercraft/Edelman. I spoke to Lyle there. 800-288-3344. What a great help he was. Hats off to tech support people in Texas. 

Lyle did some cross referencing. He said that the actual part number should've been 70338; but is now NS1.
He called me back and said order p/n 80119 Powercraft/Edelman at (CSK) Kragen,Checkers,Schucks or Auto Zone.

I haven't officially verified that it is the right part number till I see one to compare against. But from everything Lyle described, this should be it.
He said it's 28" with a fish hook configuration steel line at the box. That would make sense because of the 90 degree fitting.

If anyone else does a trial fit with one of these with their engine in the car already, please contact me and tell me what you have found out on the connecting it.

[RaptorF229]

Topcat I have an extra powersteering hose. I wasn't sure which pump I had when I needed one so I ordered both that were available. I still don't know which one it is but I'll take a picture of it. If you're interested you can have it. I can probably drop it off after work sometime since I work in fremont.

[Topcat]

That would be great Raptor.  :2thumbs:definitely a pic. But if it's for a 440 or 383 then it won't work.

[RaptorF229]

it is for a 383

[Topcat]

I appreciate your offer as far as I have found out, it won't work.

[RaptorF229]

Not with that attitude

[Topcat]

Actually I just realized, I should buy it ASAP and compare yours to it to make sure. Would that be alright?

[RaptorF229]

Are you talking to me I'll drop the hose off at your place on my way to work tomorrow if so. I work at 3 so maybe 2 o'clock. let me know

[Topcat]

You have a PM