Author Topic: Difference between Chally and Cuda rear ends?  (Read 1605 times)

Offline ViperMan

  • Resident
  • *****
  • Posts: 3989
  • 2017 Carlisle or BUST...
    • JS Custom Cars
Difference between Chally and Cuda rear ends?
« on: July 15, 2008 - 11:40:19 AM »
I stopped onto RingPinion.com after seeing their add in the Carlisle flier.  I browsed through the Make/Model section and they only had Challenger listed under the Chrysler/Plymouth/Dodge heading.  It shows the 8.75 rear, which I'm pretty confident I have.  But 'Cuda isnt' listed.

Were there differences between the 'Cuda and Chally rear ends?  I'm starting to research lockers and such for the rear (I'm trying to build a total price estimate for a radiator-to-diff rebuild on my Ebody,) and I'm quickly learning that I know NOTHING about differentials/axles/housings/etc...

Jeff
2000 Dodge Viper GTS Coupe - 8.0L V10, 6-Speed Tremec
2005 Jeep Grand Cherokee Limited - Trail Rated - 4.7L V8, Auto
2010 Dodge Challenger SE Rallye - 3.5L V6, Auto (Wife's!)




Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Difference between Chally and Cuda rear ends?
« Reply #1 on: July 15, 2008 - 11:49:34 AM »
There is no difference between E-Body Cuda and Challenger rear ends Jeff. They probably didn't list Cuda's and Challenger's together because there were A-Body Cuda's.   :dunno:


   Mike

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline The Cuda Guy

  • Support Our Troops
  • Resident
  • ****
  • Posts: 3899
  • Pearl Harbor, HI
    • C-C.com
Re: Difference between Chally and Cuda rear ends?
« Reply #2 on: July 17, 2008 - 12:49:15 AM »
In a word... nothing.

Don
The Cuda Guy Project is on going!

Member Since January 14, 2002

Offline ViperMan

  • Resident
  • *****
  • Posts: 3989
  • 2017 Carlisle or BUST...
    • JS Custom Cars
Re: Difference between Chally and Cuda rear ends?
« Reply #3 on: July 17, 2008 - 08:19:21 AM »
Don, in another 2 years or so, I'm gonna have somethin' for ya.  ;)

I'm starting my budget list now for everything drivetrain, front to back.

Jeff
2000 Dodge Viper GTS Coupe - 8.0L V10, 6-Speed Tremec
2005 Jeep Grand Cherokee Limited - Trail Rated - 4.7L V8, Auto
2010 Dodge Challenger SE Rallye - 3.5L V6, Auto (Wife's!)

Offline RDF

  • Sr. Member
  • ****
  • Posts: 1840
  • The pain that greets me is the stick that beats me
Re: Difference between Chally and Cuda rear ends?
« Reply #4 on: July 17, 2008 - 08:51:08 AM »
 :iagree:

I'll be right there with ya...my 440 is SLOWLY being built now.....I'm saving for my Eagle Stroker kit right now... :faint:
Bob

1973 'Cuda

If we never drown we'll never know how well it tastes....So tell me how it tastes and I'll know just how well you drowned.

My build:
http://www.cuda-challenger.com/cc/index.php?topic=45749.0

moparniac

  • Guest
Re: Difference between Chally and Cuda rear ends?
« Reply #5 on: July 17, 2008 - 05:38:37 PM »
throw a b-body rear in it for bigger meats....  :2cents:

Offline ViperMan

  • Resident
  • *****
  • Posts: 3989
  • 2017 Carlisle or BUST...
    • JS Custom Cars
Re: Difference between Chally and Cuda rear ends?
« Reply #6 on: July 18, 2008 - 08:28:32 AM »
B-body rear?  is it still 8 3/4?  I'm guessing they're shorter axle shafts, correct?  But then you've gotta move springs, etc...  I dunno - for 500+ horsepower, I think some 275's or 285's will fit okay.  Nothin' too fancy.

Jeff
2000 Dodge Viper GTS Coupe - 8.0L V10, 6-Speed Tremec
2005 Jeep Grand Cherokee Limited - Trail Rated - 4.7L V8, Auto
2010 Dodge Challenger SE Rallye - 3.5L V6, Auto (Wife's!)

Offline HP2

  • Resident
  • *****
  • Posts: 4478
Re: Difference between Chally and Cuda rear ends?
« Reply #7 on: July 19, 2008 - 07:33:15 AM »
(I'm trying to build a total price estimate for a radiator-to-diff rebuild on my Ebody,)

So your going to completely rebuild the Cuda and buy a Viper? Wow, I think I need to get a job with a utilities company.

B-body rear?  is it still 8 3/4?  I'm guessing they're shorter axle shafts, correct?  But then you've gotta move springs, etc...  I dunno - for 500+ horsepower, I think some 275's or 285's will fit okay.  Nothin' too fancy.

Jeff

Well, depending on the year, yes, they are around two inches narrower and are still 8.75 rears.  Will allow you to put a 10" wheel  and up to a 315 tire in the fender well easily.

Offline ViperMan

  • Resident
  • *****
  • Posts: 3989
  • 2017 Carlisle or BUST...
    • JS Custom Cars
Re: Difference between Chally and Cuda rear ends?
« Reply #8 on: July 20, 2008 - 12:37:05 AM »
So your going to completely rebuild the Cuda and buy a Viper? Wow, I think I need to get a job with a utilities company.

Take a 110% increase in pay and see what ideas it gives ya.  :)  Honestly though, the only frivolous purchase I've made since taking this new job was my wife's new Wii.  Now we're just paying off bills.  Cleared off another card last week and am paying off her car on August 1st.  So yes, buy the Viper then build the 'Cuda - that's the plan.

 
Well, depending on the year, yes, they are around two inches narrower and are still 8.75 rears.  Will allow you to put a 10" wheel  and up to a 315 tire in the fender well easily.

That's what I figured.  I really don't want that big a tire though.  I'm still building this thing to be a cruiser, not a drag-strip car, and whereas I wanna get good hookup, I also wanna be able to roast some rubber now and again!

And for what it's worth, I did a prelim budget on Friday and now it looks like the 'Cuda isn't really going to get crankin' until 2011.  I gotta get the Viper first - they're about to get expensive if/when Cerberus cans production.  Mopar parts will always be available.  As long as they don't keep getting arrested at Carlisle shows!   :bricks1:

Jeff
2000 Dodge Viper GTS Coupe - 8.0L V10, 6-Speed Tremec
2005 Jeep Grand Cherokee Limited - Trail Rated - 4.7L V8, Auto
2010 Dodge Challenger SE Rallye - 3.5L V6, Auto (Wife's!)

Offline grimmey71

  • Full Member
  • ***
  • Posts: 733
Re: Difference between Chally and Cuda rear ends?
« Reply #9 on: July 21, 2008 - 10:34:22 PM »
Could some one give me a hand here, why would the b-body rears be narrower and which years so i can start shopping  LOL

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Difference between Chally and Cuda rear ends?
« Reply #10 on: July 21, 2008 - 10:35:36 PM »
66-70  b body is an inch or so shorter. I think the 66/67 is the shortest over the 68/70.   

Offline grimmey71

  • Full Member
  • ***
  • Posts: 733
Re: Difference between Chally and Cuda rear ends?
« Reply #11 on: July 21, 2008 - 11:44:05 PM »
thanks for the quick response.  In a month or eight i should be installing my air ride four bar rear into my cuda and will be trying to pick out a rear for it.