A833 parts list

[fantum]

Hey Drew,

I didn't see the legs that mount on the transmission to which you mount the shifter rods, nor did I see any mention of the parts you need to mount the shifter rods to the legs.  Additionally, if you are putting a 4-speed in the car you will need 3 shifter rods (one for 1-2 gears, one for 3-4 gears, and one for reverse).  I also didn't see any mention of the clips you will need to mount the bar that goes from the pedal to the z-bar and the adjuster bar that goes from the z-bar to the clutch fork (which may be part of the adjuster kit).

Also, I hope you have already installed the 4-speed hump in the car.  I am guessing you did, but it's better to ask too many times.

Good luck with the project.



fantum

[sleepychallenger]

BHR513r is the 4.8 brg retainer
BHR513R-S is the smaller 4.35 brg retainer
not sure if they make the OD 5.2" brg retainer type

I have the 70 sb A833 tranny, so i will need a big block bell housing with some kind of adapter, any advice?

Hey Drew,

I didn't see the legs that mount on the transmission to which you mount the shifter rods, nor did I see any mention of the parts you need to mount the shifter rods to the legs.  Additionally, if you are putting a 4-speed in the car you will need 3 shifter rods (one for 1-2 gears, one for 3-4 gears, and one for reverse).  I also didn't see any mention of the clips you will need to mount the bar that goes from the pedal to the z-bar and the adjuster bar that goes from the z-bar to the clutch fork (which may be part of the adjuster kit).

Also, I hope you have already installed the 4-speed hump in the car.  I am guessing you did, but it's better to ask too many times.

Good luck with the project.



fantum

I have not installed the hump yet. i do have it. i have 2 shifter rods, what are the legs? I am not sure on the 3rd rod that i need.

AK450 CLUTCH ADJUSTER KIT 70-1 E/71-2 B BIG BLOCK is the kit that i got from brewers. not sure about the clips that i will need. how many? what type? If anyone wants to come to florida and do the welding for me before i get home, be my guest!!

[Chryco Psycho]

measure the front brg retainer , it should be 4.35", if so just order the belhousing that matches , there is no difference otherwise between big & small block

[sleepychallenger]

Alan has the tranny.

Alan, can you check when you can. Thanks

[sleepychallenger]

 

J/K Alan, when you get time, you know, when you get back to that place where your Cuda is patiently waiting. 

[IMNCARN82]

shifter boot...? 

[sleepychallenger]

oh yea, cant forget that can i. my list grows, keep it coming guys. i want to ensure i have everything so when i get home i can put it all in and have some fun

[Moparal]

Drew, the tranny is out of a small block cuda I think 72 model

[sleepychallenger]

anyone know the retainer size on that?

[Changin Gears]

Got to be the 4.35"

[sleepychallenger]

Thanks man. I will have to order that bell housing then. 

[sleepychallenger]

Drew, the tranny is out of a small block cuda I think 72 model

any idea on what two shift rods we have? i dont know which one i still need.

[Chryco Psycho]

do you have a picture ?

[sleepychallenger]

I dont, Alan has them, he is holding them till i get back from the desert. 

[Moparal]

OOOPS  he needs the reverse rod and a couple of shift bars