Need Instructions: How to remove & install new Ignition Switch

[Glennster]

I've got a new ignition switch, I have no idea how to remove the original switch or how to install the new one. It's a 1970 Challenger.
Instructions and help would be GREATLY appreciated!!!!
Thank you!!!!

[Bullitt-]

follow this thread & towards the end I think you will find what you need to know
http://www.cuda-challenger.com/cc/index.php?topic=37458.0

[Moparal]

follow this thread & towards the end I think you will find what you need to know
http://www.cuda-challenger.com/cc/index.php?topic=37458.0

Wade...Right when I saw this post , I thought of you first. You are one of the major players here as far as guiding people to the correct search areas on previous post.   WTG

[Glennster]

Thank you for the help...
That's a great link you sent me to, educational with some fun along the way.
Again, THANK YOU!!!!!!!!!!!!!

[Robco]

Was the thread for a column mounted ignition switch?  If so, I have a 67 Barracuda with a dash mounted ignition switch, can anyone tell me how to remove this?

[Chryco Psycho]

remove the chrome trim ring & turn the key on then depress the button under the chrome trim ring & the lock will slide out

[Robco]

Is the "button" in the small hole in the dash directly under the ignition switch?  Another stupid question, how do you remove the chrome trim ring?  Is there a clip to remove back of the switch under the dash?  Thanks.

[Chryco Psycho]

unthread the chrome retainer using needle nose pliers , remove the lock from the dash & swing it down under the dash , turn the lock on , there is a small button in the threads , depress that & the lock will pull out

[Robco]

Okay, I got it.  The ring has four small indentations that I almost didn't see.  I unscrewed that off of the ignition switch.  Thanks.

[Chryco Psycho]

Great