Anybody have 15x10 Rallys on the back of their ride?

[hemidude426ci]

pics would be greatly appreciated.

[Quikfish]

Every set I have seen didn't seem to have enough offset (Have that deep dish look) and look funny with trim rings.  I wonder how much offset you could squeeze out of a pair so that the faces look close to stock and all the meat is in back.  I mean, without spring relocation.

[MEK-Dangerfield]

Every set I have seen didn't seem to have enough offset (Have that deep dish look) and look funny with trim rings.  I wonder how much offset you could squeeze out of a pair so that the faces look close to stock and all the meat is in back.  I mean, without spring relocation.

I couid be wrong here, but I think spring relocation would be the only way to do it.   


  Mike

[360 'CUDA]

My car has the relo kit and 10" wheels.  I think it would be too close without the kit.  Just for example I know you were asking about rallyes

[BoughtItNew]

I hesitated to post this because the thread is specifically for Rally Wheels.  These are 15x10 w/4.5" Backspacing on stock axle.  Tires are 26x10 Mickeys.  They just fit though I had to roll in the right quarter to open the margin of clearance a bit.  I've seen a couple of drag cars w/wide rallys but they didn't run trim rings of course.  I can understand why they would look strange.

[71bigblock]

I dont care if they're not rallyes, both of those round taillight cudas look great!   

[BoughtItNew]

Much Obliged!

[360 'CUDA]

Thanks!!

[EFI-Cuda]

I have 15x10 Ralley wheels on my Cuda without a spring relocation.  The backspacing is 5.5 and the tire size is 275 60 15.

[72bluNblu]

I have 15x10 Ralley wheels on my Cuda without a spring relocation.  The backspacing is 5.5 and the tire size is 275 60 15.

Looks like just a touch of rub on that one too!

[BoughtItNew]

About 10 minutes per side with a plastic hammer and dolly would take care of that rub.  It hurts when you do it but it works well and is invisible unless you look up from the bottom.

[TripleBlack71Cuda]

I have 15x10 Ralley wheels on my Cuda without a spring relocation.  The backspacing is 5.5 and the tire size is 275 60 15.

I like the looks! 

[hemidude426ci]

Thanks for the pics EFI-Cuda! Those look great, btw where did you get those deep beauty rings?

[Carlwalski]

I have 15x10 Ralley wheels on my Cuda without a spring relocation. 
The backspacing is 5.5 and the tire size is 275 60 15.

I trial fitted some 275/60-15 tyres on my old 73 'Cuda with 15x10" cop rims. It fit exactly like EFI-Cuda's did.
Looked mean as hell. Close but nothing to worry about. Mine was also completely stock.

[BoughtItNew]

Where did you get 15x10 cop rims?