Well spent $80 bucks (Grant Tuff Wheel)

[Katfish]

I put on my Grant Tuff Wheel clone.  It looks great and included the horn button.  The wheel is normally $101, but Summit sent me a $30 off any $100 purchase.  So it worked out great! 

[bb71challenger]

That looks great! I want the rim blow clone

[kingtroll]

Looks good.  How does it feel??

[500Stroker]

Great wheel for the money.  I've had mine since January.   

[Katfish]

Looks good.  How does it feel??

I like the feel, it is not hard plastic, but it's not mushy foam either.  It has a firm (but soft) feel, if that makes any sense.

[Moparal]

I like the feel, it is not hard plastic, but it's not mushy foam either.  It has a firm (but soft) feel, if that makes any sense.

Please dont squeeze the charmin

[MEK-Dangerfield]

That steering wheel looks tuff.   


  Mike   

[422STROKER]

That thing looks sweet, I may have to get one of those.  What was the PN at summit?

Tom

[Katfish]

That thing looks sweet, I may have to get one of those.  What was the PN at summit?

Tom

http://store.summitracing.com/partdetail.asp?part=GRT%2D846&FROM=MG

[422STROKER]

Thanks, it just bolts on to the crush can with no mods right?  I got a crush can from thr previous owner of my car a bit back and want to swap it on soon.

Tom

[Bullitt-]

If you dont need the horn button you can do it for less than $40

http://store.summitracing.com/partdetail.asp?autofilter=1&part=GRT%2D860&N=700+400103+4294891653+115&autoview=sku

Follow Goodys instructions
http://www.goodysgotacuda.com/Grant.html

[Katfish]

Thanks, it just bolts on to the crush can with no mods right?  I got a crush can from thr previous owner of my car a bit back and want to swap it on soon.

Tom

Yep, completely bolt-on.  They even slotted the wheel for the crush can tab, and tapped the screw holes to accept the factory horn button switch.  It took 10min to take off the old wheel and put this 1 on.  This is definitely an "instant gratification" type of project.

[500Stroker]

If you dont need the horn button you can do it for less than $40

http://store.summitracing.com/partdetail.asp?autofilter=1&part=GRT%2D860&N=700+400103+4294891653+115&autoview=sku

Follow Goodys instructions
http://www.goodysgotacuda.com/Grant.html

The wheels are not the same and the smaller diameter gets in the way of viewing the rallye gauges.

[Bullitt-]

The wheels are not the same and the smaller diameter gets in the way of viewing the rallye gauges.

Good catch

[Katfish]

If you dont need the horn button you can do it for less than $40

http://store.summitracing.com/partdetail.asp?autofilter=1&part=GRT%2D860&N=700+400103+4294891653+115&autoview=sku

Follow Goodys instructions
http://www.goodysgotacuda.com/Grant.html

That wheel is the one I replaced, it's not a bolt on, and slightly different (silver paint vs polished).  You can definitely use it, but you will have to cut the slot for the tab, drill the 3 mounting holes, and drill and tap the horn button holes.

Anyone interested can have the wheel I already modified for $30 shipped.  It'll save you $15 and it's already been modified to bolt-on.