Author Topic: PS pressure line for a small block with a Federal pump (Read 768 times)

Ornamental · « **on:** August 25, 2008 - 07:20:56 AM »

I got a Federal servo pump, not a Saginaw. Apparently, the pressure line to be replaced isn't stock for a E-body:

Year One lists this as a line for 70-72 B & E-bodies with a small block and a Federal pump:

http://www.yearone.com/serverfiles/fbshopmain2.asp?pid=FD323&c=0&e=0&cat=1&hid=119AB5119&trk=

It doesn't really look like it would fit, but does it?
Who here got the same set-up as I do, and what pressure line do you use?

Bullitt- · « **Reply #1 on:** August 25, 2008 - 09:26:35 AM »

ck this one

Ornamental · « **Reply #2 on:** August 25, 2008 - 10:23:52 AM »

Thanks Bullitt!

Do you have something similar in your Chally?

Moparal · « **Reply #3 on:** August 25, 2008 - 11:07:46 AM »

It kinda looks like you installed the hose upside down

Bullitt- · « **Reply #4 on:** August 25, 2008 - 02:54:13 PM »

Thanks Bullitt!

Do you have something similar in your Chally?

No I've got a Saginaw pump

Ornamental · « **Reply #5 on:** August 25, 2008 - 06:23:01 PM »

Found a tech article about servo pumps:
http://www.bigblockdart.com/techpages/pspumps.shtml

And a website that claims to have a hose for my set up, part# 80119 seems to be the ticket to end my power steering woes:
http://www.autopart.com/partsout/1972/DODGE_CHALLENGER/7318.htm

It kinda looks like you installed the hose upside down

I can see why you would think that.

But, not so many other practial ways to do it.