Author Topic: Nice kill on C6 Vette  (Read 6352 times)

Offline cudadave72

  • Sr. Member
  • ****
  • Posts: 1857
  • you motorboatin sob!!!
Nice kill on C6 Vette
« on: September 06, 2008 - 11:37:34 PM »
I'm another person who is against street racing but this guy had it coming to him. My wife and I were on our way back from dinner and an evening cruise. As I was pulling up the off ramp from the freeway to my home I noticed some head lights flying up behind me. As I was came to the stop sign I started hearing the guy behind me reving his car up like he was tring to blow it up. Low-n-behold its a new C6 Vette. My first reaction is to ignore him and continue on my way especially with my wife in the car. As I pull away the Vette literally pushes his nose within inches of my bumper. At this point I've had enough, told my wife to hold on and nailed it. As I looked in the rear view mirror I could watch the distance between our cars fade apart!! As I appoached the next light he comes flying back up on my bumper. Again as we pull away I nailed it and put some distance between us. I notice that he hit the brakes hard and pulls into a gas station so I u-turn to see whats up. When I come up beside them I can still see a shocked look on their faces. I tell them that they have a nice car and what did they have done to it. The guy(s) tells me that it has a Procharger on it but its not running right. They go on to tell me how suprised they were when I punched the gas pedal that they were not expecting my Cuda to get off that hard. He also made a comment about my Drag Radials and I reply by telling him I ride prepared! It had all the markings of a ZO6 but I have to believe it was a stock vette with exhaust and a supercharger. I never asked but I have a hard time believeing that I would pull on a supercharged Z06. Either way I was happy to have put his ego back in check!!! :woohoo:
« Last Edit: September 06, 2008 - 11:42:26 PM by cudadave72 »
1972 BS23 H code Cuda, B5 blue, 340 streched to 416 cu in, 727 w/ 8 3/4 rear, 7.23 in the 1/8 mile and 11.38@117mph in the 1/4 on drag radials   Under restoration! Coming soon... 440cuin R3 Indy SMALL BLOCK monster!!!!





Offline 71chally416

  • Resident
  • *****
  • Posts: 3170
    • The Streetwalker
Re: Nice kill on C6 Vette
« Reply #1 on: September 06, 2008 - 11:54:38 PM »
Nice kill   :grinyes:  I've been hoping for a shot at a new Z06. Just a few Mustangs (One a newer Cobra), some ricers and my buddies high 12 second Dart so far. He did get raped by a Z06 from a roll (the owner didn't want to race for a dig cause he was afraid of breakin his rear.. :-\) and said I beat him much worse, so I'm looking forward to that when it comes.

So you like your tires? What size are you using??
Once we had Ronald Reagan, Bob Hope & Johnny Cash. Now we have Obama, No Hope and No Cash!

nivvy

  • Guest
Re: Nice kill on C6 Vette
« Reply #2 on: September 07, 2008 - 07:55:53 AM »
Muscle cars will always be looked at as the kings of the road and people will try to take a shot at you.... I think its great when the "NEW" cars get their buts wooped........   :burnout:

Offline cudadave72

  • Sr. Member
  • ****
  • Posts: 1857
  • you motorboatin sob!!!
Re: Nice kill on C6 Vette
« Reply #3 on: September 07, 2008 - 11:32:51 AM »
So you like your tires? What size are you using??

I'm running M/T drag radials 275/60/15. I love em! From a slow roll they hook and go which was a big plus last night. :icon16:

Muscle cars will always be looked at as the kings of the road and people will try to take a shot at you.... I think its great when the "NEW" cars get their buts wooped........   :burnout:

I think most people see it that way. I honestly think these guys thought I was a joke at first. I have several friends that have Vettes but the owner of this one seem like a typical Corvette owner, very cocky and full of excuses. I had to make sure he knew I was all muscle cause he made the assumption I had gas on the car. I made him feel even worse by telling him it was a "stock" 340 with just heads and cam. I forgot to mention the extra 76 cu in of displacement amoung other things! :grinno: :naughty: Like I said before I think it was just a base vette made to look like a Z06. A Z06 with any kind of supercharger should be a solid mid 10 second car at around 130mph plus in the quartermile. A standard Vette w/ a Procharger would make more since. It was also good that we got to hit it off from a very low roll as I am pretty sure he could have strolled on me from a highway roll. Anyways I was very pleased!! :cooldancing:
« Last Edit: September 07, 2008 - 05:00:41 PM by cudadave72 »
1972 BS23 H code Cuda, B5 blue, 340 streched to 416 cu in, 727 w/ 8 3/4 rear, 7.23 in the 1/8 mile and 11.38@117mph in the 1/4 on drag radials   Under restoration! Coming soon... 440cuin R3 Indy SMALL BLOCK monster!!!!


Offline moparmaniac59

  • Resident
  • *****
  • Posts: 3772
  • Drive it like ya stole it!
Re: Nice kill on C6 Vette
« Reply #4 on: September 07, 2008 - 11:45:05 AM »
Cool story,
Thanks for sharing it. I get ricers all the time roll up next to the Challenger at a stop light and start revving the engine and looking over to me for a nod. I'm not into street racing as I've lost my license a time or two due to my own stupidity, but I'm not beyond showing a punk what a muscle car can do given the right circumstances. I usually look over at them while they are revving their engine and do a big yawn and then drive off!! You can usually smell smoke and it ain't coming from the tires!!! :roflsmiley: :roflsmiley: :roflsmiley: :roflsmiley:


                                                               Matt B.
Matt

Offline Oldschool

  • Administrator
  • Permanent Resident
  • *****
  • Posts: 13195
  • Member Since 9-05-06
Re: Nice kill on C6 Vette
« Reply #5 on: September 07, 2008 - 11:56:08 AM »
Cool kill!     :2thumbs:   It's always nice when you slay some Vette dudes....    :cooldancing:   
Ken  --  In Georgia

MOPAR-------"Built To Run------Here To Stay"

Offline IMNCARN82

  • Resident
  • *****
  • Posts: 3547
  • LeDZeP
Re: Nice kill on C6 Vette
« Reply #6 on: September 07, 2008 - 12:02:43 PM »
Was he wearing a pink shirt?  Or white pants?    :roflsmiley: :smilielol:
 
Nice kill!   What did the wifey think?  :nono:   I got an earfull last night  :blah:   Don't go so fast. :blah:

 :burnout:   Latr     :2thumbs:


'73 340 5 speed,RMS,BAER,... "Supercuda" (O[   ]||||[   ]O)  
'69 Dodge Charger 383,Auto                  (OiiiiiiiiiiIiiiiiiiiiiO)
13' Challenger R/T BlacktoP  6spd. (OO________OO)
71' Demon
75' Duster
87' Conquest TSI
56' Plaza
Boulder CO
Robert    "cuda bob"

Offline cudadave72

  • Sr. Member
  • ****
  • Posts: 1857
  • you motorboatin sob!!!
Re: Nice kill on C6 Vette
« Reply #7 on: September 07, 2008 - 05:03:45 PM »
My wife was cool with it just because the Vette guy was egging it on so bad. I asked her afterwards what she thought and she said it was funny to see how embarrased the Vette owner was. Even she could tell! :burnout:
1972 BS23 H code Cuda, B5 blue, 340 streched to 416 cu in, 727 w/ 8 3/4 rear, 7.23 in the 1/8 mile and 11.38@117mph in the 1/4 on drag radials   Under restoration! Coming soon... 440cuin R3 Indy SMALL BLOCK monster!!!!


Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Nice kill on C6 Vette
« Reply #8 on: September 07, 2008 - 05:21:10 PM »
Sweet, the stock Z06's are trapping like 120mph + in the 1/4.  Nice kill!

Tom
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

nivvy

  • Guest
Re: Nice kill on C6 Vette
« Reply #9 on: September 08, 2008 - 05:39:23 AM »
The vette would still require a poweradder.....  :bigsmile:

Offline 71chally416

  • Resident
  • *****
  • Posts: 3170
    • The Streetwalker
Re: Nice kill on C6 Vette
« Reply #10 on: September 08, 2008 - 11:21:28 AM »
 :iagree:  7.20 in the 1/8 is a mid to low 11 second in the 1/4, and the Z06 only does high 11's at best (if the rear don't break...)
Once we had Ronald Reagan, Bob Hope & Johnny Cash. Now we have Obama, No Hope and No Cash!

Offline cudadave72

  • Sr. Member
  • ****
  • Posts: 1857
  • you motorboatin sob!!!
Re: Nice kill on C6 Vette
« Reply #11 on: September 08, 2008 - 06:38:37 PM »
Like I posted earlier I think this was a standard C6 done up to look like a Z06. The car had the "lambo" door thing done to it if that gives you an idea of what we are dealing with. I am very in tune with the late model sceen (I own a performance shop) and know that a well driven Z06 with a blower should have pulled on me pretty easily espeacially by the time I got to the top of second gear. My car averages around 95 mph in the eight mile which is probably around 120 in the quarter. Thats good enough to handle a stock ZO6 given the fact that my car leaves like a bat out of hell on the street. If it was infact a procharged Z06 maybe the guy couldnt drive worth a $hit or it was not running right like the guy told me (however that seems like the same excuse they always give after getting torched! :poopoke:). On the other hand if it was a standard 430hp vette with just a 5lbs kit (like he said it was set up) then I feel what happened to him was more justifiable. All the same I'm still grinning ear to ear two days latter!! :grinyes:


BTW Let me throw some gas on the Cuda (which I'm going to do as soon as I upgrade the fuel system) and I wont have to worry about either one!!! :naughty:
« Last Edit: September 08, 2008 - 06:43:19 PM by cudadave72 »
1972 BS23 H code Cuda, B5 blue, 340 streched to 416 cu in, 727 w/ 8 3/4 rear, 7.23 in the 1/8 mile and 11.38@117mph in the 1/4 on drag radials   Under restoration! Coming soon... 440cuin R3 Indy SMALL BLOCK monster!!!!


Offline 71chally416

  • Resident
  • *****
  • Posts: 3170
    • The Streetwalker
Re: Nice kill on C6 Vette
« Reply #12 on: September 08, 2008 - 06:54:59 PM »
I'd expect your car to do 11.30's at around 120~ in the 1/4 if you're carding 7.80's in the 1/8. EZ 10's with just a little hose in just 2nd and 3rd.
Once we had Ronald Reagan, Bob Hope & Johnny Cash. Now we have Obama, No Hope and No Cash!

Offline hezzel

  • Sr. Member
  • ****
  • Posts: 1105
  • Matching numbers 383 Magnum ,727 at and 3:23 rear
Re: Nice kill on C6 Vette
« Reply #13 on: September 10, 2008 - 01:54:29 PM »
 :2thumbs: Nice kill
1971 Dodge Challenger R/T
2019 Toyota Rav4 Hybrid

Offline 74 340 4speed

  • Jr. Member
  • **
  • Posts: 481
Re: Nice kill on C6 Vette
« Reply #14 on: October 03, 2008 - 10:18:54 PM »
Nice Kill.  Is your car a stalled auto or a 4 speed? 

Stock C6 Z06s are pretty bad machines though.  A guy on one of the corvette forums got a 10.85 out of his car with only drag radials.  I think he had over a 100 passes in the car before he got that number but still.  High tens out of a street car that was really designed for handling is amazing.
Andy
1967 Camaro SS: 406 sbc 505 hp/506 ft lbs|4 speed|Posi|3.73s
1969 C/10  350|Turbo 350
1969 Dodge D300 318|4 speed|Dana|4.88s
1972Nova: 350|Turbo 350
1974 'Cuda: 340|4 speed|Dana 60|4.10s|posi
1999 Camaro SS: Auto|Longtube Headers|True Duals|TT2s
2013 Challenger R/T: 6 speed|Hurst with pistol grip|mopar performance exhaust|super track pak