Author Topic: T/A Fender NOS? (Read 23065 times)

ShelbyDogg · « **on:** September 11, 2008 - 04:53:16 PM »

My 71 challenger convertible was wrecked on the driver's side left front, sometime before I got it. Someone replaced the lower control arm and driver's fender. The fender still has the part number on the inside. 3579625 I bought Sprecks Hood and fenders so I don't need this one anymore.

Is it still NOS if it was put on the car and sprayed behind the headlight buckets? It was never painted besides a light coat of primer, so it has very light surface rust and a little rust on the insde by the buckets. It is a T-A replacement fender that has the special outward curve on the body line for the bigger tires. You can only see it if you eyeball down a T-A fender and eyeball a regular fender. T/A owners know of this bulge. I'm not talking about a rolled fender lip. It has the cutout for the newer 72-74 grill, which came this way from the factory.

WIW?

Bullitt- · « **Reply #1 on:** September 11, 2008 - 07:59:23 PM »

Me thinks at least 4-5 x what a repro standard fender goes for. There's gotta be a TA out there wearing the wrong left fender that the owner would trade his 1st born for.

Alaskan_TA · « **Reply #2 on:** September 11, 2008 - 09:25:42 PM »

I have never heard of this bulge you speak of?

Got any photos?

Once any NOS Part is bolted or put on a car it is "used".

ChallengerHK · « **Reply #3 on:** September 11, 2008 - 09:30:52 PM »

Quote from: Alaskan_TA on September 11, 2008 - 09:25:42 PM

Once any NOS Part is bolted or put on a car it is "used".

This is my understanding too. I'd guess, though, that explaining the situation, i.e., it was never driven, would get you more money.

ShelbyDogg · « **Reply #4 on:** September 11, 2008 - 11:50:11 PM »

Quote from: Alaskan_TA on September 11, 2008 - 09:25:42 PM

I have never heard of this bulge you speak of? Got any photos?

Barry, My friend already had his T/A in 1980 when I bought my R/T. Parked side by side, looking down the line from the rear bumper, I could see the bulge on the front fenders on both driver and passenger side. You have to have a regular fendered car next to a T/A to see it. On my replacement fender, I see the same bulge that I saw 28 years ago. My original passenger fender doesn't have it. If you have original fenders on your T/A, you should see the difference when parked next to a standard one. My part number is 3579625

thedodgeboys · « **Reply #5 on:** September 12, 2008 - 06:23:06 AM »

Jacksboys · « **Reply #6 on:** September 13, 2008 - 12:29:25 AM »

wally426ci · « **Reply #7 on:** September 13, 2008 - 07:11:03 AM »

Maybe its a 15" wheel thing.... They never made 71 T/A's....

And you thought YOU knew T/A's Barry....

ShelbyDogg · « **Reply #8 on:** September 13, 2008 - 09:37:19 AM »

Quote from: wally426ci on September 13, 2008 - 07:11:03 AM

Maybe its a 15" wheel thing.... They never made 71 T/A's....

Are we going to start the '71 T/A thing again?

In MCG a few years ago, in Galen's column, he said that he saw documentation on (1) '71 T/A. It was sold to an investment company and then never seen again. GALEN IS GALEN, so take this for what you think of him, good or bad. Maybe they will keep it hidden till it hits 50 years old?

The Cuda Guy · « **Reply #9 on:** September 13, 2008 - 09:44:52 AM »

There were parts made for the 71 T/A such as the 4bl base and air cleaner to mate to the T/A hood. I seen pics of it once.

Don

Challenger6pak · « **Reply #10 on:** September 13, 2008 - 11:01:31 AM »

Quote from: shelbydogg on September 11, 2008 - 04:53:16 PM

It has the cutout for the newer 72-74 grill, which came this way from the factory.

Sounds like a 71 fender. Some 71's had '15 inch' fenders also. Other 70 cars beside the T/A also had the '15 inch fenders.

Alaskan_TA · « **Reply #11 on:** September 13, 2008 - 12:24:50 PM »

I have compared my original T/A fenders to fenders from 318, /6 & hemi cars, I have seen no outward bulge on any of them.

What front mounting plate does it have, got a photo?

Challenger6pak · « **Reply #12 on:** September 13, 2008 - 12:50:12 PM »

The original 1970 Chrysler parts book shows this fender as one for the Trans Am Challenger with F60X 14 tires.

ShelbyDogg · « **Reply #13 on:** September 13, 2008 - 03:39:34 PM »

Quote from: Alaskan_TA on September 13, 2008 - 12:24:50 PM

I have compared my original T/A fenders to fenders from 318, /6 & hemi cars, I have seen no outward bulge on any of them.

What front mounting plate does it have, got a photo?

Photo

I see the bulge. I also showed it to a friend of mine that restores Mopars. He didn't know about it till I showed it to him. He saw it. Any other T/A owners out there able to see the outward bulge at the body line? It has to be on the car to see it.

Quote from: Challenger6pak on September 13, 2008 - 12:50:12 PM

The original 1970 Chrysler parts book shows this fender as one for the Trans Am Challenger with F60X 14 tires.

Does it agree with the other numbers above in the interchange book? I think the body shop needed a fender and just ordered the one that was available.

Alaskan_TA · « **Reply #14 on:** September 13, 2008 - 04:20:17 PM »

OK, it is a later (1971 or newer) fender since it has the notch at the front.

"The original 1970 Chrysler parts book shows this fender as one for the Trans Am Challenger with F60X 14 tires."

Does it really say 14"? All T/As came with 15" tires.

Author Topic: T/A Fender NOS? (Read 23065 times)

ShelbyDogg

T/A Fender NOS?

Bullitt-

Re: T/A Fender NOS?

Alaskan_TA

Re: T/A Fender NOS?

ChallengerHK

Re: T/A Fender NOS?

ShelbyDogg

Re: T/A Fender NOS?

thedodgeboys

Re: T/A Fender NOS?

Jacksboys

Re: T/A Fender NOS?

wally426ci

Re: T/A Fender NOS?

ShelbyDogg

Re: T/A Fender NOS?

The Cuda Guy

Re: T/A Fender NOS?

Challenger6pak

Re: T/A Fender NOS?

Alaskan_TA

Re: T/A Fender NOS?

Challenger6pak

Re: T/A Fender NOS?

ShelbyDogg

Re: T/A Fender NOS?

Alaskan_TA

Re: T/A Fender NOS?