Author Topic: Hemi Billboard on Challenger  (Read 4370 times)

Offline DAYLEY/CHALLENGER

  • Resident
  • *****
  • Posts: 3157
  • Still My Inspiration..1971, Rockingham, Nc
Hemi Billboard on Challenger
« on: September 28, 2008 - 03:26:40 PM »
Found a model of a 70 Challenger and It has a Hemi Billboard on the side.  I do not remember that being an option............
Dave or David




Offline pink panther

  • Resident
  • *****
  • Posts: 2547
Re: Hemi Billboard on Challenger
« Reply #1 on: September 28, 2008 - 03:59:39 PM »
you see a bill board, it should be on a cuda.

I don't like it. Sorry just my  :2cents:
Scott   -  Member since 9/18/2005

Offline 71bigblock

  • Sr. Resident
  • ******
  • Posts: 5337
    • Steve's Mopars
Re: Hemi Billboard on Challenger
« Reply #2 on: September 28, 2008 - 04:02:36 PM »
Looks like a cuda bodyline, interesting... :clueless:

Offline bentpshrods

  • Full Member
  • ***
  • Posts: 698
  • Almost there, Boise Id.
Re: Hemi Billboard on Challenger
« Reply #3 on: September 28, 2008 - 10:03:05 PM »
   That's the great thing about doing models. You can see how an idea will look like --- good or bad--- with out butchering up the real thing.  And if it's bad you can just blow it up.    :lol:

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Hemi Billboard on Challenger
« Reply #4 on: September 29, 2008 - 05:01:03 AM »
My guess is the company that made the model didn't do their homework.   :screwy:

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

sleepychallenger

  • Guest
Re: Hemi Billboard on Challenger
« Reply #5 on: September 29, 2008 - 06:00:03 AM »
Looks like a cuda bodyline, interesting... :clueless:

i agree. the bodyline down the side looks like a cuda but it has the chally fender slope, hood, and rear slop...
« Last Edit: September 29, 2008 - 06:03:41 AM by sleepychallenger »

Offline Pistol Gripper

  • Resident
  • *****
  • Posts: 3124
  • Member since: Dirt was under warranty
Re: Hemi Billboard on Challenger
« Reply #6 on: September 29, 2008 - 09:26:31 AM »
I have a Chally model at home just like it, I thought it was a mistake.

P.G.
O ne
B ig
A $$
M istake
A merica

Offline cudadave72

  • Sr. Member
  • ****
  • Posts: 1857
  • you motorboatin sob!!!
Re: Hemi Billboard on Challenger
« Reply #7 on: September 29, 2008 - 09:37:46 PM »
I'll place bets that it was "made in China" :icon16:
1972 BS23 H code Cuda, B5 blue, 340 streched to 416 cu in, 727 w/ 8 3/4 rear, 7.23 in the 1/8 mile and 11.38@117mph in the 1/4 on drag radials   Under restoration! Coming soon... 440cuin R3 Indy SMALL BLOCK monster!!!!


Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: Hemi Billboard on Challenger
« Reply #8 on: September 29, 2008 - 11:50:43 PM »
I agree with MEK . . that company didn't check things out well enough.   :screwy:

Offline DAYLEY/CHALLENGER

  • Resident
  • *****
  • Posts: 3157
  • Still My Inspiration..1971, Rockingham, Nc
Re: Hemi Billboard on Challenger
« Reply #9 on: September 30, 2008 - 07:03:09 AM »
Yep It was made in China.....................Its hard to find anything these days that isn't.  And that is so Wrong...................
Dave or David

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Hemi Billboard on Challenger
« Reply #10 on: September 30, 2008 - 08:28:52 AM »
  And that is so Wrong...................

...Or Wong.   :misbehaving:

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline cudadave72

  • Sr. Member
  • ****
  • Posts: 1857
  • you motorboatin sob!!!
Re: Hemi Billboard on Challenger
« Reply #11 on: September 30, 2008 - 08:40:09 AM »
Yep It was made in China.....................Its hard to find anything these days that isn't.  And that is so Wrong...................

The reason I thought this is because I have seen several model cars from Asian companies that are very incorrect as far as details go. I have two models that the description on the box describes the totally wrong year drivetrain for that vehicle!!
1972 BS23 H code Cuda, B5 blue, 340 streched to 416 cu in, 727 w/ 8 3/4 rear, 7.23 in the 1/8 mile and 11.38@117mph in the 1/4 on drag radials   Under restoration! Coming soon... 440cuin R3 Indy SMALL BLOCK monster!!!!


Offline 71bigblock

  • Sr. Resident
  • ******
  • Posts: 5337
    • Steve's Mopars
Re: Hemi Billboard on Challenger
« Reply #12 on: September 30, 2008 - 10:01:10 AM »
...Or Wong.   :misbehaving:

LOL, took me like 3 times reading that to figure it out.   :bricks1:

Offline Pistol Gripper

  • Resident
  • *****
  • Posts: 3124
  • Member since: Dirt was under warranty
Re: Hemi Billboard on Challenger
« Reply #13 on: September 30, 2008 - 11:10:26 AM »
I like it when you see an obvious mistake, I.E. the "68 Cuda" RC car that's really a 71.  R$ight on the package is the Chrysler authorization.  I've seen it more now that the Germans bought them out.

P.G.
O ne
B ig
A $$
M istake
A merica

Offline Carlwalski

  • C-C.com Expert
  • ********
  • Posts: 20672
Re: Hemi Billboard on Challenger
« Reply #14 on: October 01, 2008 - 11:32:04 AM »


Must be the same company that made the "1970 and 2008" Challenger poster.
The Challenger's a 1974 model. That poster is all over the net too lol, quite a blunder.
1970 Dodge Challenger R/T
White, License Plate, 0A-5599
540ci Aluminium Hemi, F.A.S.T EFI
TF-727 Gear Vendor OD, Dana 60