Stock sway bar diameter

[Roppa440]

I am trying to find out what the stock front sway bar diameter was on 1970 Challengers. PN 2835862 (not the T/A).

I suspect this was the same diameter all models (if fitted) and all years?

I have one source telling me 15/16ths and another saying 0.92 inch which would be a bit smaller than 15/16ths.

It has been many years since i last saw my stock front sway bar. Can anyone tell me what its diameter was?

This is for a friend who is restoring a 383 R/T and wants to fit the correct parts.

[Chryco Psycho]

I don`t have a caliper handy to measure mine

[somedaysoon]

 My stock one is .875 or 7/8". Pete

[heminut]

Mine is the same as Pete's, .875.

[ChallengerHK]

I've always heard 7/8, but mine is covered in thick POR-15 and I can't get an accurate measurement on it.

[Roppa440]

Thanks very much guys. That was a great help. Much appreciated.