News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: A/C Pic request  (Read 1793 times)

    Offline jmartin99

    • Jr. Member
    • **
    • Posts: 214
    A/C Pic request
    « on: October 17, 2008 - 02:03:45 PM »
    Could someone please post some detailed pics of the A/C system and Hoses (Preferably a '72)?  I am putting one together for a friend and I am not sure how everything goes.  I need to know where any clips go and what hose goes where. 

    Thanks!!!

    Jeff
    Logged


    Offline 72bluNblu

    • Sr. Member
    • ****
    • Posts: 1836
    Re: A/C Pic request
    « Reply #1 on: October 17, 2008 - 02:56:26 PM »
    Here's one of my '72 challenger 318, let me know if you need anything specific...


    Logged

    Offline Lunchbox

    • Sr. Member
    • ****
    • Posts: 1948
    Re: A/C Pic request
    « Reply #2 on: October 17, 2008 - 04:26:36 PM »
    The A/C systems through the years are pretty close with the exception of some fittings that changed from male/female and the location that the location of the hookups for the condensor.

    Lunch
    Logged

    Offline Lunchbox

    • Sr. Member
    • ****
    • Posts: 1948
    Re: A/C Pic request
    « Reply #3 on: October 17, 2008 - 04:31:52 PM »
    More
    Logged

    Offline wally426ci

    • Sr. Resident
    • ******
    • Posts: 5095
      • maryland mopars
    Re: A/C Pic request
    « Reply #4 on: October 17, 2008 - 04:53:42 PM »
     :popcorn:
    Logged
    {OOI====I====IOO}
          '71 Challenger
          [O[]=====[]O]
          '68 D100

    Offline jmartin99

    • Jr. Member
    • **
    • Posts: 214
    Re: A/C Pic request
    « Reply #5 on: May 07, 2009 - 02:37:30 PM »
    I cannot tell from the pics above, does the hose from the blower motor connect to one of the tubes on the heater box that extend through the firewall? 

    Thanks!

    Jeff
    Logged

    Offline ShelbyDogg

    • Sr. Resident
    • ******
    • Posts: 5007
    Re: A/C Pic request
    « Reply #6 on: May 12, 2009 - 06:22:32 PM »
    Yes, The blower motor mounts with it's hole towards the bottom. A hose goes from that hole to the fitting that sticks out of the firewall right below the motor.
    Logged
    Rob

    3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

    My Pace Car restoration thread:
    http://www.cuda-challenger.com/cc/index.php?topic=44869.0

    Offline mrbill426

    • Full Member
    • ***
    • Posts: 775
      • All Around Mopars
    Re: A/C Pic request
    « Reply #7 on: June 24, 2009 - 10:57:05 PM »
    Logged
    MOPAR or NO car!

    '72 'Cuda 340, white on white
    '72 Sebring; bracket project
    '64 Imperial Crown black on black
    '66 Imperial Crown; parts car

    Offline r15303

    • Jr. Member
    • **
    • Posts: 354
    Re: A/C Pic request
    « Reply #8 on: June 25, 2009 - 01:20:09 PM »
     :popcorn:
    Logged

    Offline r15303

    • Jr. Member
    • **
    • Posts: 354
    Re: A/C Pic request
    « Reply #9 on: June 25, 2009 - 01:25:38 PM »
    Do the wires for the pressure switch on the dryer run dowm the fender and then over to the compressor or douwn the valve cover and jump over to the pressure switch?
    Logged

    Offline 72bluNblu

    • Sr. Member
    • ****
    • Posts: 1836
    Re: A/C Pic request
    « Reply #10 on: June 25, 2009 - 02:27:56 PM »
    Mine run down the valve cover.
    Logged
    Pages: [1]
    « previous next »