Install Cuda Quarter Window Weatherstrip

[the_engineers]

Any suggestions/tips on how to do this?  I have the window out, but sliding in the new weatherstrip is turning out to be a real PITA.

[DAYLEY/CHALLENGER]

I think when I installed mine they did not slide in.  Place the strip in the finished location and just start pushing the strip into the metal, like it tucks into the groove., like a snap in fit.  Of  course it has been a while . I installed mine with the windows in the car so I know I couldn't slide them in from the bottom................

[422STROKER]

I slid mine in it was tight , I think I used a very small amount of silicone spray to help them along.   Maybe a short stay in the freezer will make them contract enough to slide in easier?


Tom

[the_engineers]

I slid mine in it was tight , I think I used a very small amount of silicone spray to help them along.   Maybe a short stay in the freezer will make them contract enough to slide in easier?


Tom

I hit mine with some silicone and it finally went.  Thanks for the tip.

[Moparal]

I give up trying to install mine. They need to be installed to. Maybe Chryco will do it for me when/if he comes. I almost damaged the new drivers side trying to install it.

[422STROKER]

I hit mine with some silicone and it finally went.  Thanks for the tip.

Sweet, glad it worked for you.

Maybe it will work for AL too.

Tom

[Moparal]

Mine wouldnt slide useing anything. It is like the chrome it slides in is to tight. I can get it around half way is all. Hadn't tried the passenger side yet

[422STROKER]

Maybe the weatherstrip in the freezer will work?  That and a nice toasty garage to heat up the Chrome.

Tom