Author Topic: Once again...  (Read 889 times)

Offline cudadave72

  • Sr. Member
  • ****
  • Posts: 1857
  • you motorboatin sob!!!
Once again...
« on: November 07, 2008 - 08:48:42 AM »
I'm bored and start looking at ebay to see whats out there and come across an ad for a 73 Cuda. Pretty nice car. I read the ad and it states that the underbody is very solid. As I scroll down the pictures I come across one that show the undercarridge and notice to the left rear of the picture what appears to be a very large patch in the floor board that had been riveted in!!! Being in an "internet police mood" I email the guy and start off by telling him that he has a nice car but what was what looked to be a large patch in the floor over the muffler? He writes back that he doesnt know what I'm talking about and the floors are a solid as the ones in his new Dodge truck!!! You guys take a look and tell me if you see what I see!

PS: look closely over the muffler on the left side of the picture.
« Last Edit: November 07, 2008 - 10:22:44 AM by cudadave72 »
1972 BS23 H code Cuda, B5 blue, 340 streched to 416 cu in, 727 w/ 8 3/4 rear, 7.23 in the 1/8 mile and 11.38@117mph in the 1/4 on drag radials   Under restoration! Coming soon... 440cuin R3 Indy SMALL BLOCK monster!!!!





Offline mrob

  • Jr. Member
  • **
  • Posts: 200
Re: Once again...
« Reply #1 on: November 07, 2008 - 09:36:47 AM »
Sure looks like a rivetted patch to me.

Offline Jacksboys

  • Sr. Resident
  • ******
  • Posts: 5540
  • Here Since 08/28/06 GEORGIA
Re: Once again...
« Reply #2 on: November 07, 2008 - 10:21:18 AM »
That appears to be in the trunk area instead of the floor board, and it does look rivetted.
1971 Dodge Challenger:  360/904/3.23
   
Success is the maximum utilization of the ability that you have. - Zig Ziglar

Offline Rare_T_A

  • Resident
  • *****
  • Posts: 3916
    • Freiss Family Mopar Site
Re: Once again...
« Reply #3 on: November 07, 2008 - 01:25:34 PM »
You would think he would at least try to cover it with undercoating.
'09 Challenger R/T  5.7 HEMI Auto
'70Challenger T/A 340 727

Fargo, N. Dak.
My web Site:  http://freiss.co.nr

My Flikr Page: http://www.flickr.com/photos/102813164@N04/

I was born with nothing and I still have most of it left!

Offline cudadave72

  • Sr. Member
  • ****
  • Posts: 1857
  • you motorboatin sob!!!
Re: Once again...
« Reply #4 on: November 07, 2008 - 01:50:25 PM »
The trunk pan is mostly hidden by the gas tank. It looks like maybe under the rear seat???
1972 BS23 H code Cuda, B5 blue, 340 streched to 416 cu in, 727 w/ 8 3/4 rear, 7.23 in the 1/8 mile and 11.38@117mph in the 1/4 on drag radials   Under restoration! Coming soon... 440cuin R3 Indy SMALL BLOCK monster!!!!


Offline 'cudaCruiser

  • Jr. Member
  • **
  • Posts: 208
    • My '72 B5 'cuda
Re: Once again...
« Reply #5 on: November 07, 2008 - 04:52:20 PM »
Rivets or screws...?
Mickey



"The man who complains about the way the ball bounces is likely to be the one who dropped it." Lou Holtz

Offline cudadave72

  • Sr. Member
  • ****
  • Posts: 1857
  • you motorboatin sob!!!
Re: Once again...
« Reply #6 on: November 07, 2008 - 06:51:11 PM »
Rivets or screws...?

Either way not what I concider solid. Dont get me wrong Ol' Blue has some battle scars but at least I would list them espeacially if its going to show up on a photo!!
« Last Edit: November 09, 2008 - 08:43:20 PM by cudadave72 »
1972 BS23 H code Cuda, B5 blue, 340 streched to 416 cu in, 727 w/ 8 3/4 rear, 7.23 in the 1/8 mile and 11.38@117mph in the 1/4 on drag radials   Under restoration! Coming soon... 440cuin R3 Indy SMALL BLOCK monster!!!!


Offline black71

  • Full Member
  • ***
  • Posts: 730
  • eph 6:12
Re: Once again...
« Reply #7 on: November 09, 2008 - 03:17:47 PM »
  :eek4: looks like sheetmetal screws to me

Offline moparmussel

  • Jr. Member
  • **
  • Posts: 125
Re: Once again...
« Reply #8 on: November 09, 2008 - 04:27:18 PM »
 :bigshades: another reason to avoid e pray! too many dishonest souls out there trying to unload junk on easy prey.last 3 deals i made and bought on e pray were all bad! 2 sets of parts i had to through away.
74 cuda,az car. built 383,727 manual shift,reverse pattern.8th cuda project,cant get enough!

Offline cudadave72

  • Sr. Member
  • ****
  • Posts: 1857
  • you motorboatin sob!!!
Re: Once again...
« Reply #9 on: November 09, 2008 - 08:44:38 PM »
:bigshades: another reason to avoid e pray! too many dishonest souls out there trying to unload junk on easy prey.last 3 deals i made and bought on e pray were all bad! 2 sets of parts i had to through away.
:iagree:   :ebay:= :swear: :bricks1:
1972 BS23 H code Cuda, B5 blue, 340 streched to 416 cu in, 727 w/ 8 3/4 rear, 7.23 in the 1/8 mile and 11.38@117mph in the 1/4 on drag radials   Under restoration! Coming soon... 440cuin R3 Indy SMALL BLOCK monster!!!!