Author Topic: Holiday season, dare to be different  (Read 49006 times)

Offline ChallengerGary

  • Resident
  • *****
  • Posts: 3040
    • Challenger Gary
Re: Holiday season, dare to be different
« Reply #180 on: December 12, 2008 - 01:16:43 PM »
Hey ChallengerGary,

I have to search around my garage but I THINK I have what might be a SB 4 barrel Mopar Offenhauser intake.  I would have to check the part #.

Is this something you would be interested in?  :dunno: Again, I have to dig in the garage.  If I remember correctly, it's all wrapped in plastic...

If I did around the garage I might be able to post a SB Mopar radiator....  :blah:   :dunno:

Anything is fine.  Not being picky here, just want something to put on top of the ol' 318 to perk it up a little once I get her running again.
2006 Dodge Ram 1500 Mega Cab 5.7 Hemi

1972 Dodge Demon - "new" project

AND TOO MANY OTHER MOPARS THROUGH MY HANDS TO COUNT




Offline Challenger6pak

  • Resident
  • *****
  • Posts: 4084
Re: Holiday season, dare to be different
« Reply #181 on: December 12, 2008 - 01:29:32 PM »
Hey ChallengerGary,

I have to search around my garage but I THINK I have what might be a SB 4 barrel Mopar Offenhauser intake.  I would have to check the part #.

Is this something you would be interested in?  :dunno: Again, I have to dig in the garage.  If I remember correctly, it's all wrapped in plastic...

If I did around the garage I might be able to post a SB Mopar radiator....  :blah:   :dunno:
Most small block manifolds are 340-360. Gary you will have to port the edges of your 318 heads to match if it is not a 273-318 unit. .
1969 Sport Satellite H code convertible, 1970 Cuda 440+6, 1970 Challenger R/T 440+6, 1970 Challenger 383 R/T auto, 1970 Challenger R/T 383 4 speed,1971 Challenger convertible.

Offline CUDA JAS

  • Resident
  • *****
  • Posts: 2292
  • vroooooom!
Re: Holiday season, dare to be different
« Reply #182 on: December 12, 2008 - 03:03:06 PM »
Hey ChallengerGary,

I have to search around my garage but I THINK I have what might be a SB 4 barrel Mopar Offenhauser intake.  I would have to check the part #.

Is this something you would be interested in?  :dunno: Again, I have to dig in the garage.  If I remember correctly, it's all wrapped in plastic...

If I did around the garage I might be able to post a SB Mopar radiator....  :blah:   :dunno:

I would be interested in the rad if it is a 22! (man auto does not matter) :thumbsup:
74 'cuda 360/727



Gearhead: car nut, automotive enthusiast, one who loves hot rods, muscle cars, hot trucks, burnin' rubber and neck snapping performance. 

Just call me a gearhead!

Offline Rare_T_A

  • Resident
  • *****
  • Posts: 3916
    • Freiss Family Mopar Site
Re: Holiday season, dare to be different
« Reply #183 on: December 12, 2008 - 05:07:43 PM »

Yep, those are the ones I am looking for - thanks!!!!

I got the book today. This thing is sweet!!!!!!!!!!!!!!  It looks like brand new. Thanks a bunch.
'09 Challenger R/T  5.7 HEMI Auto
'70Challenger T/A 340 727

Fargo, N. Dak.
My web Site:  http://freiss.co.nr

My Flikr Page: http://www.flickr.com/photos/102813164@N04/

I was born with nothing and I still have most of it left!

Offline hemiken

  • Sr. Resident
  • ******
  • Posts: 8785
  • Hemi-fied Mopar in Australia
Re: Holiday season, dare to be different
« Reply #184 on: December 12, 2008 - 05:12:37 PM »
The elves have found a center cap for a 72 and up rally wheel, a new set of torsion bar boots, a set of lower dash trim panels in orange and a cassette player that worked once when removed but now it is unknown; as is.

Dash trim is going to a good home down south...
Boots and cassette are gone.
Recieved dash trim and casette, all arrived at Slotts place :jumping: thanks Scott :2thumbs:
1970 Barracuda   (O^--^===|===^--^O)
1971 Barracuda   (O O {]{]{]|[}[}[} O O)
1970 Challenger  (O O [======R/T=] O O)
1971 Challenger  (O O ===== ===== O O)
I pay homage to the best Mopars ever built.

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Holiday season, dare to be different
« Reply #185 on: December 12, 2008 - 06:50:29 PM »
Anything is fine.  Not being picky here, just want something to put on top of the ol' 318 to perk it up a little once I get her running again.

Challenger6pak has a good point, once I find it I'll run the #s and see what it fits.  :thumbsup:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Holiday season, dare to be different
« Reply #186 on: December 12, 2008 - 06:52:04 PM »
I would be interested in the rad if it is a 22! (man auto does not matter) :thumbsup:

Once I get it out I'll take some pics so you can see the condition and see what #s are on the radiator.  I have no idea what shape it is in as I did not have it installed in the car. :thumbsup:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline CUDA JAS

  • Resident
  • *****
  • Posts: 2292
  • vroooooom!
Re: Holiday season, dare to be different
« Reply #187 on: December 12, 2008 - 09:09:20 PM »
Once I get it out I'll take some pics so you can see the condition and see what #s are on the radiator.  I have no idea what shape it is in as I did not have it installed in the car. :thumbsup:

Cool... :thumbsup:
74 'cuda 360/727



Gearhead: car nut, automotive enthusiast, one who loves hot rods, muscle cars, hot trucks, burnin' rubber and neck snapping performance. 

Just call me a gearhead!

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Holiday season, dare to be different
« Reply #188 on: December 14, 2008 - 03:18:25 AM »
I would be interested in the rad if it is a 22! (man auto does not matter) :thumbsup:


Ok, I dug out the radiator.  Sad to say, it's not very pretty.  When I got it I didn't look at it very closely.  Has an ID tag that states "AA.....19......0780497....made in USA" 

Measures 22"x3" approximately, it's not as wide as the radiator in my '72 Challenger with a 340, although the same length (22").  I wonder if it was a slant 6 radiator?  I have no I dea what this came from.  I was just told it was for a Mopar. 

Take a look at the pics at the link.  It DOES need some work.  It looks like it was patched up here and there. Short of replacing them, I do not have a good handle as to what makes a repairable radiator.  Let me know what you think or if anyone else has any comments about the radiator please feel free to post.  :)  Please let me know if it's even worth giving away...  :faint:

http://s98.photobucket.com/albums/l247/PEAJJ/Miscellaneous%20car/
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Holiday season, dare to be different
« Reply #189 on: December 14, 2008 - 03:24:19 AM »
Anything is fine.  Not being picky here, just want something to put on top of the ol' 318 to perk it up a little once I get her running again.

Gary,

Sorry, I dug around the garage and have yet to find the intake manifold.  I thought I still had one hanging around.  I found the radiator but no intake so far.  :(  Not sure where it is.

If Rare T/A or anyone else has an intake, don't wait for me.  I don't really need a stripe kit, I just thought I might have an intake for you.  I'll keep looking around, though.  :thumbsup:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline ChallengerGary

  • Resident
  • *****
  • Posts: 3040
    • Challenger Gary
Re: Holiday season, dare to be different
« Reply #190 on: December 14, 2008 - 09:26:51 AM »
Thanks for looking.   :cheers:
2006 Dodge Ram 1500 Mega Cab 5.7 Hemi

1972 Dodge Demon - "new" project

AND TOO MANY OTHER MOPARS THROUGH MY HANDS TO COUNT

Offline Rare_T_A

  • Resident
  • *****
  • Posts: 3916
    • Freiss Family Mopar Site
Re: Holiday season, dare to be different
« Reply #191 on: December 14, 2008 - 10:10:35 AM »
I don't have an Intake but I knoe I have a 71 style left manifold. The problem in I have everything stashed for winter. I'm also having trouble finding it. Now with the blizzard going on it all at a stand still. Gary how soon do you need the manifold? The one I looking for is this one that was on the Duster when I got it.
'09 Challenger R/T  5.7 HEMI Auto
'70Challenger T/A 340 727

Fargo, N. Dak.
My web Site:  http://freiss.co.nr

My Flikr Page: http://www.flickr.com/photos/102813164@N04/

I was born with nothing and I still have most of it left!

Offline CUDA JAS

  • Resident
  • *****
  • Posts: 2292
  • vroooooom!
Re: Holiday season, dare to be different
« Reply #192 on: December 15, 2008 - 12:54:26 PM »
Ok, I dug out the radiator.  Sad to say, it's not very pretty.  When I got it I didn't look at it very closely.  Has an ID tag that states "AA.....19......0780497....made in USA" 

Measures 22"x3" approximately, it's not as wide as the radiator in my '72 Challenger with a 340, although the same length (22").  I wonder if it was a slant 6 radiator?  I have no I dea what this came from.  I was just told it was for a Mopar. 

Take a look at the pics at the link.  It DOES need some work.  It looks like it was patched up here and there. Short of replacing them, I do not have a good handle as to what makes a repairable radiator.  Let me know what you think or if anyone else has any comments about the radiator please feel free to post.  :)  Please let me know if it's even worth giving away...  :faint:

http://s98.photobucket.com/albums/l247/PEAJJ/Miscellaneous%20car/



Thanks Man,

That does not look like it will work for me.  The outlet is on the wrong side.

Thanks anyway.

Jason
74 'cuda 360/727



Gearhead: car nut, automotive enthusiast, one who loves hot rods, muscle cars, hot trucks, burnin' rubber and neck snapping performance. 

Just call me a gearhead!

Offline ChallengerGary

  • Resident
  • *****
  • Posts: 3040
    • Challenger Gary
Re: Holiday season, dare to be different
« Reply #193 on: December 15, 2008 - 01:01:12 PM »
I don't have an Intake but I knoe I have a 71 style left manifold. The problem in I have everything stashed for winter. I'm also having trouble finding it. Now with the blizzard going on it all at a stand still. Gary how soon do you need the manifold? The one I looking for is this one that was on the Duster when I got it.

Rare TA Looks like the A-Body version is different from the B/E body version from 72   :(
2006 Dodge Ram 1500 Mega Cab 5.7 Hemi

1972 Dodge Demon - "new" project

AND TOO MANY OTHER MOPARS THROUGH MY HANDS TO COUNT

Offline AllGreen70RT

  • Jr. Member
  • **
  • Posts: 157
Re: Holiday season, dare to be different
« Reply #194 on: December 15, 2008 - 01:05:23 PM »
Just found this thread, great idea.
I'll take a look tonight to see what I might have. Probably not much since its been years since I finished my car.
I know I have a bunch of old Mopar magazines in excellent condition if anyone is interested.