Poly Torsion Boot?

[challengerx]

Can someone give me instruction on how these go on, they dont look like the stock ones and the clips are different also. Rubber ones were on back order everywhere I looked. Thanks, you guys have bailed me out alot so far.

[Bullitt-]

You  have to get rough with them.....1st lube your torsion bar....2nd heat the boot, I boiled some water in the microwave & soaked them.....3rd pull like HE!!..... They will turn inside out if your working from the rear, be sure you have them oriented correctly to begin with.

[challengerx]

I can't even figure which direction they go. They are shaped like a shot glass, does the larger end go over the socket on the cross member. They come with c clips are these the clips that are used on the back side of the cross member. What is the groove for on the small end of the poly boots.Thanks

[dutch]

some pictures would help 

[Bullitt-]

Sounds like you've got it...big end fits over x-member on the outside, nothing more to do on the small end & the metal clips go inside from the rear after the bar is in.

[challengerx]

Thanks

[challengerx]

Boiling them was the ticket,they slid right on. Thanks again for the help