Author Topic: k member slightly damaged :( what now?  (Read 2156 times)

Offline 4THECHALLENGE

  • Jr. Member
  • **
  • Posts: 374
k member slightly damaged :( what now?
« on: December 31, 2008 - 02:49:32 AM »
When I bought my challenger it was a salvage title car ( well it still is ) I was under the car today  and I noticed where the damage took place, it was the k frame ( is that the correct term?) I noticed they repaired it but it still shows a bit of damage. I would post pics but I post from my iPhone. How bad is this and what's the best way to fix? I just dropped a motor in along with the  tranny and the car runs now. I wish I would have caught this earlier :( before the motor drop :(
Thanks for the help




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: k member slightly damaged :( what now?
« Reply #1 on: December 31, 2008 - 03:33:45 AM »
need more info
the the K is basically intact no big deal , not that hard to replace it either if the damage is bad

Challenger - You`ll wish You Hadn`t

Offline ragtopdodge

  • Resident
  • *****
  • Posts: 4065
Re: k member slightly damaged :( what now?
« Reply #2 on: December 31, 2008 - 04:28:20 AM »
 :useless:
'70 318-auto Chally 'vert
'71 383-auto 'Cuda 'vert (sold)
06 300c SRT8
04 2500 QCLB 4x4 HO

Offline 426HEMI

  • Sr. Resident
  • ******
  • Posts: 5187
  • My M46 Barracuda! Member Since:October 01, 2005
Re: k member slightly damaged :( what now?
« Reply #3 on: December 31, 2008 - 04:54:50 AM »
I will agree to a point it could cause the front end to be out of alignment also.  Are you going to show the car or drive it?  anyway post some pictures and we can tell more!!!!!!
Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

1970 M46 Barracuda
1998 Dodge Darango

Gordon

Offline 4THECHALLENGE

  • Jr. Member
  • **
  • Posts: 374
Re: k member slightly damaged :( what now?
« Reply #4 on: December 31, 2008 - 01:02:59 PM »
Can I email my pics to someone to post?
Thanks guys


Offline 4THECHALLENGE

  • Jr. Member
  • **
  • Posts: 374
Re: k member slightly damaged :( what now?
« Reply #6 on: January 02, 2009 - 01:51:41 PM »
I'd like to post pics but can't on the iPhone.  :dupe: at this point I don't have a choice but to stick with what I have and hope I have no alignment problems.

Offline ChallengerHK

  • Moderator
  • Sr. Resident
  • *****
  • Posts: 7338
  • I'm working on it - No, really
Re: k member slightly damaged :( what now?
« Reply #7 on: January 02, 2009 - 01:55:12 PM »
If you can e-mail pics to me I'll post them for you. My address is in my profile.


"She'll make point five past light speed. She may not look like much, but she's got it where it counts, and I've made a lot of special modifications myself."

- Han Solo, Star Wars

Advice Thread - Taking Pictures Of Cars

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9102
  • Tastes Like Chicken
Re: k member slightly damaged :( what now?
« Reply #8 on: January 02, 2009 - 02:39:34 PM »
There is a K frame for a v-8 on FEBO for sale from Bronxmopar for 150.   I think he would probably take less and he is located in NY. 

http://www.cuda-challenger.com/cc/index.php?topic=52349.msg538984#msg538984

This is the link that I posted here for the guy.  He is a FABO member as well as FEBO. 
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline 4THECHALLENGE

  • Jr. Member
  • **
  • Posts: 374
Re: k member slightly damaged :( what now?
« Reply #9 on: January 06, 2009 - 12:51:15 AM »
thanks guys. I'll send you pics tomorrow, I'll take them in the morning . Thanks

Offline vert

  • Jr. Member
  • **
  • Posts: 265
  • Looking good, Billy Ray! Feeling good, Louis!
Re: k member slightly damaged :( what now?
« Reply #10 on: February 16, 2009 - 09:50:01 PM »
My Barracuda had a damaged k-frame. I bought a powdercoated unit.  My bodyshop supported the engine , dropped out the damaged unit , and installed the replacement unit, no problem.
71 Barracuda | Hemi idling | Hemi Dyno pull

Offline 4THECHALLENGE

  • Jr. Member
  • **
  • Posts: 374
Re: k member slightly damaged :( what now?
« Reply #11 on: June 04, 2009 - 12:53:53 AM »
i found a super deal on a used one..thanks all


Offline cudadave72

  • Sr. Member
  • ****
  • Posts: 1857
  • you motorboatin sob!!!
Re: k member slightly damaged :( what now?
« Reply #12 on: June 04, 2009 - 08:14:50 AM »
You still owe us pictures of your old one... you tease! :poopoke: :crazy:
1972 BS23 H code Cuda, B5 blue, 340 streched to 416 cu in, 727 w/ 8 3/4 rear, 7.23 in the 1/8 mile and 11.38@117mph in the 1/4 on drag radials   Under restoration! Coming soon... 440cuin R3 Indy SMALL BLOCK monster!!!!


Offline cudax34me

  • Full Member
  • ***
  • Posts: 774
Re: k member slightly damaged :( what now?
« Reply #13 on: June 04, 2009 - 10:47:32 PM »
 :popcorn:

Offline 4THECHALLENGE

  • Jr. Member
  • **
  • Posts: 374
Re: k member slightly damaged :( what now?
« Reply #14 on: June 04, 2009 - 11:55:19 PM »
 :droolingbounce: I TRIED POSTING PICS BUT THIS THING SAYS I AM OVER THE LIMIT... :22yikes: