Will My Shaker Fit With A/C In My Challenger?

[daveh]

Hey guys I just got a new shaker hood with the entire bubble set up.  I have a 71 Challenger with a 340, 4 barrel.  Will the bubble fit with the A/C or do I need to remove the A/C entirely?  Thanks for your help.

Dave

[Chryco Psycho]

well if you test fit it you will quicly see there is no way to keep the A/C , at least using the stock pump , the Sanden could possibly be made to fit , my friend has a 440 + 6 with the Sanden & it just needed some minor clearnacing to fit the the six pack base

[ragtopdodge]

For stock-looking setups, Bouchillon Performance makes brackets to fit I believe.


http://www.bouchillonperformance.com/BPE4725.asp



For more money, March Performance.


http://www.marchperf.com/styletrack_chry_sb.html


For even MORE money, Billet Specialties.


http://www.billetspecialties.com/itemdetail.asp?cid=23&scid=184&pid=886

[craigsmytcudas]

well if you test fit it you will quicly see there is no way to keep the A/C , at least using the stock pump , the Sanden could possibly be made to fit , my friend has a 440 + 6 with the Sanden & it just needed some minor clearnacing to fit the the six pack base

i have done a few like this .the  shaker base is farther out than the standard 6 bbl base plates. vintage air kits work well  .the thing is that a pair of tight 90 degree fittings coming out from your compressor  is utmost important .c