Author Topic: Trim Ring - Converting Brushed to Polished  (Read 5514 times)

Offline dutch

  • Sr. Resident
  • ******
  • Posts: 6944
Re: Trim Ring - Converting Brushed to Polished
« Reply #15 on: September 14, 2015 - 04:22:51 PM »
not every quality stainless is non magnetic.  ever see those magnet bars for hanging your stainless kitchen gear...?
*** Bart ***




Offline YellowThumper

  • Sr. Member
  • ****
  • Posts: 1633
  • I left the snow for this?
Re: Trim Ring - Converting Brushed to Polished
« Reply #16 on: September 14, 2015 - 09:52:52 PM »
not every quality stainless is non magnetic.  ever see those magnet bars for hanging your stainless kitchen gear...?

300 series ss is non magnetic. 303, 304, 316 etc.
400 series is. 410, 420, 440 etc.  These are more of a tooling steel that gets hardened.

I would suspect the magnetic one is just plated steel. There is a definite color (hue) difference between them.
Clean well and look at backside visual differences in color. Not just surface finishes.

Mike
Removing the warning labels one at a time.
Nature will take care of the rest.

Offline walkAbout

  • Jr. Member
  • **
  • Posts: 161
Re: Trim Ring - Converting Brushed to Polished
« Reply #17 on: April 17, 2016 - 04:04:38 PM »
Mystery solved. Have had it out for polishing. The stainless rear aftermarkets are now shiny,  :bananasmi But: The ori fronts are chromed and cannot be polished. Would need first unchroming, then polishing, then rechroming again. To much, not worth, I would say. I think better to get 2 stainless polish aftermarkets, but then 2 more things that are not ori.  :clueless:

CU

walkAbout