Speedometer cable support

[Nel]

Hi! I have an issue with my speedometer cable. The guy who had the car before me, change the floor pan and I think that he did'nt put back a braket that support the speedometer cable and keeping it away from the exhaust. I would like to find good pictures that show how she made and where she should be.
My car is a 1970 Challenger convertible, 340, 4 speeds.

Please help me

[Alaskan_TA]

Routing past pivot bar;

[Alaskan_TA]

Clip welded to floor pan;

[Alaskan_TA]

Close up;

[Nel]

Wow! Thanks. I'm gona be able resolve my probleme. The clip weld to the floor pan, you just fold it over the cable or it is alreadry in a loop and you pass the cable trought it?

[Alaskan_TA]

It "snaps" over the cable, the ends are too big to thread it through.

[resq302]

Shame someone doesn't repop those clips.  I know a lot of cars who are missing them since the body shops never seemd to replace them on the new floor pans.

[Alaskan_TA]

It would be fairly easy to duplicate from flat stock on an "as needed" basis. A hammer, a bolt the right diameter for a die to get the curves right, a few minutes with a vise......

[Topcat]

Go to the AMK catalog and see p/n B-13121
It looks pretty close. Just weld it in.

http://amkproducts.com/Catalog_PDF.htm

[30below]

Alaskan T/A,any chance you could repost those pictures?Thanks

[poolboy]

Hello Alaskan TA,
I was wondering if you could re-post those pix of the speedo cable. I'm missing the bracket thats welded to the floor also and would like to get it in the correct position. Thanks

[Nel]

I still have the pics on my computre put I dont know how to post them. I can send them by e-mail if you want.

[72rtchallenger]

I still have the pics on my computre put I dont know how to post them. I can send them by e-mail if you want.

i could use them too,,send them to tabneys@yahoo.com
tks

[Topcat]

Hopefully this'll help out

[72rtchallenger]

tks topcat,,just what i needed