Spring Relocation Kit - Anyone used one successfully?

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1] 2

    Author Topic: Spring Relocation Kit - Anyone used one successfully?  (Read 2341 times)

    Offline chaps70rt

    • Full Member
    • ***
    • Posts: 613
    • 70 Challenger R/T Hardtop in Progress (Canada)
    Spring Relocation Kit - Anyone used one successfully?
    « on: February 08, 2009 - 04:47:41 PM »
    I am considering a spring relocation kit for the rear of my challenger.   Has anyone out there used one of these kits?   Could you share your thoughts .... good and bad?    Would you do it again?  Worth the money ($185).

    Thanks .... CHAPS70RT
     :feedback:
    Logged
    White 1970 Challenger R/T
    440 - 4BBL - Shaker
    Daily Driver - 2014 Dodge RAM 1500
    Stouffville, Ontario Canada


    Offline Katfish

    • Resident
    • *****
    • Posts: 3733
    • 70 Challenger
    Re: Spring Relocation Kit - Anyone used one successfully?
    « Reply #1 on: February 08, 2009 - 04:55:18 PM »
    I did it on my 70 Challenger so I could get 6" BS.  Very happy with the results, 9" rims still have 1" clearance to the lip.

    One thing I was disappointed with was the good Dr didn't mention you will have to "trim" quite a bit of the rear valance bracing for clearance.
    When I ask about this afterwards, the response was, "you don't have to trim the standard valance".  So if you have a dual exhaut valance expect to trim.
    Not really a major issue but kinda of bugged me it wasn't mentioned originally.
    Logged

    Offline chaps70rt

    • Full Member
    • ***
    • Posts: 613
    • 70 Challenger R/T Hardtop in Progress (Canada)
    Re: Spring Relocation Kit - Anyone used one successfully?
    « Reply #2 on: February 08, 2009 - 05:32:21 PM »
    Thanks Katfish ...... good to know.  I understand that the perches need to be relocated as well.   True?
    Logged
    White 1970 Challenger R/T
    440 - 4BBL - Shaker
    Daily Driver - 2014 Dodge RAM 1500
    Stouffville, Ontario Canada

    Offline Katfish

    • Resident
    • *****
    • Posts: 3733
    • 70 Challenger
    Re: Spring Relocation Kit - Anyone used one successfully?
    « Reply #3 on: February 08, 2009 - 05:39:59 PM »
    Yes, need to cut-off old ones, and reweld new inward.
    Logged

    Offline chaps70rt

    • Full Member
    • ***
    • Posts: 613
    • 70 Challenger R/T Hardtop in Progress (Canada)
    Re: Spring Relocation Kit - Anyone used one successfully?
    « Reply #4 on: April 05, 2009 - 08:30:12 AM »
    Thanks again for the information.    Good to know ....
    Logged
    White 1970 Challenger R/T
    440 - 4BBL - Shaker
    Daily Driver - 2014 Dodge RAM 1500
    Stouffville, Ontario Canada

    nivvy

    • Guest
    Re: Spring Relocation Kit - Anyone used one successfully?
    « Reply #5 on: April 06, 2009 - 03:52:55 PM »
    Quote from: Katfish on February 08, 2009 - 05:39:59 PM
    Yes, need to cut-off old ones, and reweld new inward.

    Or put in a b body rear and the perches are right where you need them..  :thumbsup:
    Logged

    Offline chaps70rt

    • Full Member
    • ***
    • Posts: 613
    • 70 Challenger R/T Hardtop in Progress (Canada)
    Re: Spring Relocation Kit - Anyone used one successfully?
    « Reply #6 on: April 06, 2009 - 08:32:08 PM »
    I never considered that.   I am planning to change out the rear end with a sure-grip ..... so, the search is on.

    Thanks for the info ..... much appreciated.
    Logged
    White 1970 Challenger R/T
    440 - 4BBL - Shaker
    Daily Driver - 2014 Dodge RAM 1500
    Stouffville, Ontario Canada

    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: Spring Relocation Kit - Anyone used one successfully?
    « Reply #7 on: April 06, 2009 - 08:52:30 PM »
    Quote from: Katfish on February 08, 2009 - 04:55:18 PM

    One thing I was disappointed with was the good Dr didn't mention you will have to "trim" quite a bit of the rear valance bracing for clearance.
    When I ask about this afterwards, the response was, "you don't have to trim the standard valance".  So if you have a dual exhaut valance expect to trim.
    Not really a major issue but kinda of bugged me it wasn't mentioned originally.

    The mopar kit fits with no trimming  :bigsmile:
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...

    Offline chaps70rt

    • Full Member
    • ***
    • Posts: 613
    • 70 Challenger R/T Hardtop in Progress (Canada)
    Re: Spring Relocation Kit - Anyone used one successfully?
    « Reply #8 on: April 06, 2009 - 09:02:22 PM »
    Do you know the part number ..... or .... is it in the Mopar
    Performance catalogue??
    Logged
    White 1970 Challenger R/T
    440 - 4BBL - Shaker
    Daily Driver - 2014 Dodge RAM 1500
    Stouffville, Ontario Canada

    Offline chaps70rt

    • Full Member
    • ***
    • Posts: 613
    • 70 Challenger R/T Hardtop in Progress (Canada)
    Re: Spring Relocation Kit - Anyone used one successfully?
    « Reply #9 on: April 06, 2009 - 09:26:55 PM »
    Is it the Offset Rear shackle Package ..... Part# P4120076 and Front Offset hanger bracket set: P4120078??   Is that all that is needed, or are there other pieces required besides the front and rear packages??
    Thanks again ....
    Logged
    White 1970 Challenger R/T
    440 - 4BBL - Shaker
    Daily Driver - 2014 Dodge RAM 1500
    Stouffville, Ontario Canada

    Offline ShelbyDogg

    • Sr. Resident
    • ******
    • Posts: 5007
    Re: Spring Relocation Kit - Anyone used one successfully?
    « Reply #10 on: April 06, 2009 - 09:47:05 PM »
    I have 2 cars with the 1" offset front mount and offset rear shackles, b-body rear ends. I fit the 10" wheels with the 295-50s on them. Dr. Diff sells the kits for $189, but the rear shakles for $50 if you want to weld the front ones up like I did. I heard the Mopar Perf. ones are extended for the super stock springs and extended out 2 inches.

    If you get Dr. Diff"s 1-1/2" offset kit, the rear of the spring will hit the rear valance braces. You are safe with the 1" kit.
    « Last Edit: April 06, 2009 - 10:01:51 PM by ShelbyDogg »
    Logged
    Rob

    3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

    My Pace Car restoration thread:
    http://www.cuda-challenger.com/cc/index.php?topic=44869.0

    Offline rusty dodge

    • Jr. Member
    • **
    • Posts: 298
    • 74 challenger 440-727-3:55
    Re: Spring Relocation Kit - Anyone used one successfully?
    « Reply #11 on: April 06, 2009 - 09:51:40 PM »
    What is your plan for springs. The Mopar kit will require different springs. The front portion of the spring is shorter than stock.

    I think Dr Diff  has 2 kits - depending on what springs you want to run.
    Logged

    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: Spring Relocation Kit - Anyone used one successfully?
    « Reply #12 on: April 07, 2009 - 04:52:43 AM »
    Quote from: chaps70rt on April 06, 2009 - 09:26:55 PM
    Is it the Offset Rear shackle Package ..... Part# P4120076 and Front Offset hanger bracket set: P4120078??   Is that all that is needed, or are there other pieces required besides the front and rear packages??
    Thanks again ....

    Yes but you have to use the shorter super stock springs sounds like rob has the answer for the stock challenger springs.

    Are the b body springs the same lenth as the super stockers?
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...

    Offline ShelbyDogg

    • Sr. Resident
    • ******
    • Posts: 5007
    Re: Spring Relocation Kit - Anyone used one successfully?
    « Reply #13 on: April 07, 2009 - 07:50:59 AM »
    E-body and b-body springs are the same length, but I put some 69 Roadrunner springs in my challenger last saturday and the rear shackles are bottomed out on my rear bumper guards.
    Logged
    Rob

    3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

    My Pace Car restoration thread:
    http://www.cuda-challenger.com/cc/index.php?topic=44869.0

    Offline Katfish

    • Resident
    • *****
    • Posts: 3733
    • 70 Challenger
    Re: Spring Relocation Kit - Anyone used one successfully?
    « Reply #14 on: April 07, 2009 - 08:34:38 AM »
    The only reason I went with Dr Diff was because his kit could use the factory length spring.  The Mopar kit forces you to use the Super Stock springs which have more arch and will make the car sit cartoon like high. 

    You will have to trim the rear valance bracing if you have dual exhaust cut-outs with the Dr Diff 1" kit.  Nothing major, but it hits.
    Logged
    Pages: [1] 2
    « previous next »