Author Topic: Some things I'm removing from my car soon  (Read 9066 times)

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Some things I'm removing from my car soon
« on: March 01, 2009 - 10:53:55 PM »
I'm going to see if I can generate any interest for some of the parts I am taking off my car.  As most of you know, I am starting to put my car back to what it once was, so I have to remove some fairly good items to do this. When I say new, items have 1k miles on them

440-6 with 1k miles on it
Dana 60 ebody specs, truck rear with no snubber. 35 spline power lock
Big block 70 bellhousing
Drive shaft for dana 60
new in box inline tube 3/8 fuel line
Repop road lamps n brackets. Never turned on
New dual exhaust pan- no rust
red bar for front grill
Sport hood with pin holes
15x7 rallyes with 275 60 15 and 235 60 15 tires
3/8 fuel sending unit
complete 440-6 new exhaust system from manifolds to tips including hangers


I will add to this list as I think of other stuff that isnt correct to my car.  My damn PM box stays full, so just add comments here on these items. I won't ebay them, so they will sell here to whom I choose when I take them off. I am wanting serious offers on seperate pieces. Ask any question on any piece and I will give the history of it. Just please keep comments in this post. Since I suck at keeping pm box cleaned out. I have addresses in there now stored for shipping parts out this week so I only have room for 2 pm's.  Once I pull the engine, I will commit to getting rid of all parts interested.




Offline 426HEMI

  • Sr. Resident
  • ******
  • Posts: 5187
  • My M46 Barracuda! Member Since:October 01, 2005
Re: Some things I'm removing from my car soon
« Reply #1 on: March 02, 2009 - 12:23:17 AM »
Hey Alan would I be better off having the 3/8' fuel line on my car?  I want a new line for it any ways because of the rust in it already?  If I had not already gotten the rallye's for mine I would have gotten them from you.  Wouldnt mind the dana and drive shaft but dont have to have it.  Just wish I knew you were getting rid of some of this before I ordered what I did for my car.  O well timing is everything I guess.  I am happy with what I ordered anyways.  Gordon
Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

1970 M46 Barracuda
1998 Dodge Darango

Gordon

Offline 69bronzeT5

  • SRT Guru
  • Sr. Member
  • ****
  • Posts: 1104
  • Mopar or No Car
    • Forgotten Mopars
Re: Some things I'm removing from my car soon
« Reply #2 on: March 02, 2009 - 02:25:06 AM »
I sent you a PM regarding the Rallyes...I'm pretty sure it got through. Let me know :2thumbs:
Associate Editor for Mopar Connection Magazine
http://moparconnectionmagazine.com/


1969 Charger
1970 Coronet
1971 Charger R/T
1971 Road Runner
1989 VW Cabriolet
2004 SRT-4
2006 Grand Cherokee SRT8
2008 Challenger SRT8
2016 Wrangler Unlimited
2017 Ram 1500 Rebel

Offline wally426ci

  • Sr. Resident
  • ******
  • Posts: 5095
    • maryland mopars
Re: Some things I'm removing from my car soon
« Reply #3 on: March 02, 2009 - 08:21:12 AM »
Hey Al, does the sending unit read correctly? is it a repro? is the fuel line rubber tubing I assume?

did you get my 2nd PM about the dash and my pockets?  :dunno:
{OOI====I====IOO}
      '71 Challenger
      [O[]=====[]O]
      '68 D100

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: Some things I'm removing from my car soon
« Reply #4 on: March 02, 2009 - 09:01:43 AM »
Hey Al I need a rear end! What gear is it?
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Some things I'm removing from my car soon
« Reply #5 on: March 02, 2009 - 09:14:51 AM »
I sent you a PM regarding the Rallyes...I'm pretty sure it got through. Let me know :2thumbs:


No pm's please :2thumbs: Just post here. Stock offset on the rims

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Some things I'm removing from my car soon
« Reply #6 on: March 02, 2009 - 09:17:00 AM »
Hey Al, does the sending unit read correctly? is it a repro? is the fuel line rubber tubing I assume?

did you get my 2nd PM about the dash and my pockets?  :dunno:

The unit seems to be reading ok. It drops the first quarter tank kinda quick then normal after that. The 3/8ths  lines are steel from the fuel pump back to the tank

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Some things I'm removing from my car soon
« Reply #7 on: March 02, 2009 - 09:17:56 AM »
Hey Al I need a rear end! What gear is it?

the dana is a 354 gear factory 35 spline sure grip and moser 35 spline axles

Offline RaptorF229

  • Full Member
  • ***
  • Posts: 599
  • A work in Progress
Re: Some things I'm removing from my car soon
« Reply #8 on: March 02, 2009 - 09:30:16 AM »
How much for the rallyes al?

Offline wally426ci

  • Sr. Resident
  • ******
  • Posts: 5095
    • maryland mopars
Re: Some things I'm removing from my car soon
« Reply #9 on: March 02, 2009 - 09:41:35 AM »
did you get my 2nd PM about the dash and my pockets?  :dunno:

Hmmm... wonder how I could ship those lines, may be tough.
{OOI====I====IOO}
      '71 Challenger
      [O[]=====[]O]
      '68 D100

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: Some things I'm removing from my car soon
« Reply #10 on: March 02, 2009 - 10:56:30 AM »
the dana is a 354 gear factory 35 spline sure grip and moser 35 spline axles
Perfect! Just what I was looking for! When will it be available, and what did you want for it?
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9102
  • Tastes Like Chicken
Re: Some things I'm removing from my car soon
« Reply #11 on: March 02, 2009 - 11:57:52 AM »
Probably can't afford it now but I have to ask.  How much for the pipes? 
Maybe I could get them over to my barracuda that is down the road from you and have them waiting.
What size are the pipes for the exhaust? 
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline acudanut

  • Full Member
  • ***
  • Posts: 928
Re: Some things I'm removing from my car soon
« Reply #12 on: March 02, 2009 - 02:24:00 PM »
 Sounds like you have a Killer combo of parts. Are you sure you really want to "make it stock" ?

Offline RUSTY Cuda

  • Sr. Member
  • ****
  • Posts: 1948
  • One big step foward!
Re: Some things I'm removing from my car soon
« Reply #13 on: March 02, 2009 - 02:48:33 PM »
Seems I'm always 2nd to post on the 15" rallies, as before if no 1 drops out & shipping can be arranged to NJ( are these the same wheels that started in paramus???? 10 mins from my house! :pullinghair: ) I'd like another shot at em.
Post up some prices & I'll see if it's in the budget, things are a bit tight these days,Thanks,Rich.

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Some things I'm removing from my car soon
« Reply #14 on: March 02, 2009 - 03:05:54 PM »
Seems I'm always 2nd to post on the 15" rallies, as before if no 1 drops out & shipping can be arranged to NJ( are these the same wheels that started in paramus???? 10 mins from my house! :pullinghair: ) I'd like another shot at em.
Post up some prices & I'll see if it's in the budget, things are a bit tight these days,Thanks,Rich.

The wheels I bought form paramus are still new and in the boxes. The wheels and tires are whats on my car now and complete down to the lug nuts. Tires have 90% tread on back and around 99% on the front. I bought all this stuff new