Author Topic: Safety first......................  (Read 2885 times)

Offline R/T hedkace

  • Resident
  • *****
  • Posts: 2619
Safety first......................
« on: March 19, 2009 - 05:47:04 PM »
 Got some rust embedded in my eye while working on my leaf springs last weekend, (YES I had safety glasses on, but somehow it got by).
 Have been off from work the last few days, and at the hospital so they could scrape it out with a needle  :scared:  :22yikes:
Not the funnest experience I've ever been through, and still a bit blurry  :eek7:  :eek4:
 I did not start this to be a .....("O yea, I have more stitches than you" fight)  :lol:
Just a friendly reminder to try and be as safe as possible when you are out there working on your  :working:
It only takes a second to really ruin your day  :walkaway:
Please be cautious, and aware of what you are doing, and how you are doing it.
Even when you are trying to be carefull accidents can still happen  :2cents:  :thumbsup:





Jeff     
    Defending the Earth from "uptight" mods!!   an endless crusade..........

1970 Dodge Challenger R/T 440 4speed Dana
1970 Dodge Super Bee
1969 Barracuda
 Massachusetts




Offline 71bigblock

  • Sr. Resident
  • ******
  • Posts: 5337
    • Steve's Mopars
Re: Safety first......................
« Reply #1 on: March 19, 2009 - 06:26:17 PM »
I've been grinding/cutting junk all day, too.  5 years ago or so I had the same thing happen, really sucks.  The best thing to do is to probably wear goggles, that would be the only way to keep everything out. 














































But I'm sure that I had a much larger piece and was in way more pain.   :poopoke: :stirpot:

Offline R/T hedkace

  • Resident
  • *****
  • Posts: 2619
Re: Safety first......................
« Reply #2 on: March 19, 2009 - 06:32:59 PM »


But I'm sure that I had a much larger piece and was in way more pain.   :poopoke: :stirpot:
:roflsmiley:   :smilielol:    :lol:   :smilielol:   :roflsmiley:


 Here we go.............  :blah:  :lol2:





Jeff     
    Defending the Earth from "uptight" mods!!   an endless crusade..........

1970 Dodge Challenger R/T 440 4speed Dana
1970 Dodge Super Bee
1969 Barracuda
 Massachusetts

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Safety first......................
« Reply #3 on: March 19, 2009 - 06:35:51 PM »
I often use a high power magnet to pull metal shavings out of my eyes when I am porting etc

Challenger - You`ll wish You Hadn`t

Offline R/T hedkace

  • Resident
  • *****
  • Posts: 2619
Re: Safety first......................
« Reply #4 on: March 19, 2009 - 06:37:24 PM »
I once killed a billy goat with my bare hands  :swaying:





Jeff     
    Defending the Earth from "uptight" mods!!   an endless crusade..........

1970 Dodge Challenger R/T 440 4speed Dana
1970 Dodge Super Bee
1969 Barracuda
 Massachusetts

wagesofsin

  • Guest
Re: Safety first......................
« Reply #5 on: March 19, 2009 - 06:37:41 PM »
i cut the first digit of my index finger off, and continued working while my helper passed out, becoming of no use to me anyhow. actually, i never noticed the production differance.

and yes its a true story.

Offline torredcuda

  • Sr. Resident
  • ******
  • Posts: 6218
  • Epping NH joined 11/23/03
Re: Safety first......................
« Reply #6 on: March 19, 2009 - 06:38:07 PM »
Well a long time ago I actually got a small metal sliver stuck straight into my eye at work and they had to freeze and numb my eyball to dig it out in the emergency room so I think I win!   :ylsuper:
Jeff
72 Barracuda 340/4spd  Torred
70 roadrunner 383/auto  In-Violet
70 Duster 360/auto drag car  (Petty Blue soon)
04 Ram 2500 5.7 Hemi

wagesofsin

  • Guest
Re: Safety first......................
« Reply #7 on: March 19, 2009 - 06:45:36 PM »
Well a long time ago I actually got a small metal sliver stuck straight into my eye at work and they had to freeze and numb my eyball to dig it out in the emergency room so I think I win!   :ylsuper:



sure about that?

Offline R/T hedkace

  • Resident
  • *****
  • Posts: 2619
Re: Safety first......................
« Reply #8 on: March 19, 2009 - 06:46:34 PM »
Well a long time ago I actually got a small metal sliver stuck straight into my eye at work and they had to freeze and numb my eyball to dig it out in the emergency room so I think I win!   :ylsuper:
Actually it sounds like you lost.
The ones who win don't go to the emergency room  :poopoke:  :lol2:





Jeff     
    Defending the Earth from "uptight" mods!!   an endless crusade..........

1970 Dodge Challenger R/T 440 4speed Dana
1970 Dodge Super Bee
1969 Barracuda
 Massachusetts

wagesofsin

  • Guest
Re: Safety first......................
« Reply #9 on: March 19, 2009 - 06:50:36 PM »
Actually it sounds like you lost.
The ones who win don't go to the emergency room  :poopoke:  :lol2:



ahahahaha, like a good criminal is the one who dont get caught!!

try telling that to the next gangsta you see struggling to even walk with his pants hangin!! how you gonna run boy? you cant even walk!!!

hahaha

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Safety first......................
« Reply #10 on: March 19, 2009 - 09:54:51 PM »
Metal and rust in your eye just doesnt go away till you get it remove. I know the emergency room procedure routine. It sucks. I am a grinder by trade. My machines are around 3000 lbs for the big one and 700 for the little grinder. And they are portable. So I work inside and out side with them. Fans and the wind can make my job a nightmare. I use magnets like chryco says, and I keep them all over my machines trying to cath the metal dust. I have ground over 500 lbs of metal dust just this week.

Safety is a key factor.   

Offline 426HEMI

  • Sr. Resident
  • ******
  • Posts: 5187
  • My M46 Barracuda! Member Since:October 01, 2005
Re: Safety first......................
« Reply #11 on: March 19, 2009 - 10:03:04 PM »
I have a scare on my left breast from a grinder and I think there is still some steal in my chest also from grinding and I know I have had rust and things in my eyes several times from over the years even with safety goggles and taking all of the safety precausions I could still things get into your eyes.   Safty first.
Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

1970 M46 Barracuda
1998 Dodge Darango

Gordon

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Safety first......................
« Reply #12 on: March 19, 2009 - 10:04:44 PM »
Is that a scared titty or pectoral muscle :poopoke:

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Safety first......................
« Reply #13 on: March 19, 2009 - 10:41:11 PM »
i cut the first digit of my index finger off....

I cut the first digit off my phone # and no one could call me...  :bricks1:




Just kiddin'.  Hope your finger is okay.  :)

Jeff, dude, hope your eye heals well.  You really appreciate your vision when it gets messed up.

Hope everything returns to normal!  :grinyes:  :thumbsup:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline 426HEMI

  • Sr. Resident
  • ******
  • Posts: 5187
  • My M46 Barracuda! Member Since:October 01, 2005
Re: Safety first......................
« Reply #14 on: March 19, 2009 - 10:44:38 PM »
Is that a scared titty or pectoral muscle :poopoke:

it would be a scared titty hehehehehehe
Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

1970 M46 Barracuda
1998 Dodge Darango

Gordon