Anyone installing a factory front sway bar. Spring clean give away

[Moparal]

Not for sale, but free.  I just happen to find the 2 stock original bolts with the threads on both ends for the bushings.

If you are doing this sway bar now. Just post up you want them.   This is to be considered my first part for the spring clean give away I do.   Please don't ask for these if you are not installing correct stuff or if you are not doing the job right now. This is to benefit a person working on his front end now as I list.

It comes with 2 of the 4 original nuts and all 4 washers.  Going to any member above newbie status.

[dmk67]

Hi, Al if those front sway bars are available I could use them.can you ship them to 44137 THANKS!!!

[Moparal]

  Please dont make me feel guilty


Going to any member above newbie status.        Yer about there. These are the bolts not the bars

[Moparal]

dmk67    are you doing your front end right now?

[69bronzeT5]

You're a good guy Al

[dmk67]

Dont feel guilty AL ,im not even close to pounding the pavement, evry needed part just puts me closer to that day :burnout:if someone is closer go rihgt ahead time is my best friend

[68bee]

Hi Al,  I could use the bolts but im still a newbie. How do you get out of newbie land?

[73Chally]

Hi Al.  Are you talking about the end link bolts?  I'll take my place in line, but if they are still available, I'd love to get them.  I just put in a set from O'Reilly's, and they appear to be about 1/4" too long.  The nuts use up the thread before getting fully tightened on the bushings.

If all's good let me know and I'll PM you with my address.

[Moparal]

Hi Al.  Are you talking about the end link bolts?  I'll take my place in line, but if they are still available, I'd love to get them.  I just put in a set from O'Reilly's, and they appear to be about 1/4" too long.  The nuts use up the thread before getting fully tightened on the bushings.

If all's good let me know and I'll PM you with my address.

To get away from newbie status, you have to make around 100 posts I think it is. This shows that you are participating frequently on cc.c

73chally is the actual first member to ask for them, and so they belong to him now   The newbie rule is the only rule I usually stick to. Not picking on any individual, but want to see some activity and get to know a member before I just give my stuff away. I hope you can understand this.

Pm me your address

[Topcat]

AMK sells end link bolts new ~FYI
http://amkproducts.com/Catalog_PDF/6-23.pdf


Chrysler E Body Stabilizer End Links

p/n     B-11694 2 $12

5/16-18 X 5 13/16 9/16 AF
OSJ, 2535992

[Moparal]

AMK sells end link bolts new ~FYI
http://amkproducts.com/Catalog_PDF/6-23.pdf


Chrysler E Body Stabilizer End Links

p/n     B-11694 2 $12

5/16-18 X 5 13/16 9/16 AF
OSJ, 2535992

That's cool Mike.  These are just free

[Topcat]

Yeah I see that Al and that's really nice of you. 
I just I'd let others know in case they need em later.

[68bee]

Hi Al , I understand your newbie rule and agree. I get a lot of good information off this board. I'll just have to start posting more and not just reading the posts

To get away from newbie status, you have to make around 100 posts I think it is. This shows that you are participating frequently on cc.c

73chally is the actual first member to ask for them, and so they belong to him now   The newbie rule is the only rule I usually stick to. Not picking on any individual, but want to see some activity and get to know a member before I just give my stuff away. I hope you can understand this.

Pm me your address

[73Chally]

Thanks Al.  PM sent.